Benz

D, 1885 – 1926

(1) Benz & Co, Rheinische Gasmotorenfabrik, Mannheim, 1885 – 1899

(2) Benz & Cie, Rheinische Gasmotorenfabrik AG, Mannheim, 1899 – 1911

(3) Benz & Cie, Rheinische Automobil- und Motorenfabrik AG, Mannheim, 1911 – 1926

Karl Benz is honoured throughout the world as the man who designed and built the first workable motor car driven by an internal combustion engine. It is established that in 1885 his first Benz car was ready and made its first trials. Benz’s ideas were concentrated from the beginning on a car as an organic unit of chassis and engine, not on motorization of existing vehicles. The first Benz car was a three-wheeler with two driven rear wheels. The engine was a horizontal single-cylinder with a vertical crankshaft which had a horizontal flywheel. It developed ¾hp and a speed of 8mph is recorded for one of the first trial runs. This prototype Benz car had some featured which are still very extensively used in automobile construction: the water-cooled engine, electric ignition, mechanically operated inlet valve, and a differential gear. This first Benz car still exists and belongs to the Deutsches Museum, Munich, to which it was presented by its inventor. Several Benz Patentwagen replicas were built and are now in different museums.

Only a few Benz cars were produced and for sale in the following years. At the Munich Exhibition of 1888 Benz had the opportunity of showing his improved Benz car to a wider public. Instead of the wire wheels of the first Benz Patentwagen the later models had wooden-spoked wheels. Engine output was increased to 2hp. Sales of Benz’ stationary gas engines were quite satisfactory, while interest in Benz motor cars was very limited and it was not until 1890 that Benz started a real, if small, ‘to order’ production. This was partly a result of exhibiting his Benz car at the Paris World Fair in 1889 which led to increasing sales by his French agent Emile Roger, who already sold Benz stationary engines. The other important factor was that Benz was joined by two new partners in 1890. These two men who possibly saved Benz from the fate of numerous other inventors, driven aground by financial difficulties, were Friedrich von Fischer and Julius Ganss. Fischer took over internal administration and Ganss became responsible for sales. Benz himself was free for further developments on the technical side of the business, which made sound progress. 1893 saw the production of the first 4-wheeled Benz car, the Benz Victoria. This model was also the basis for the first Benz van and Benz bus in 1895; its technical conception was also adopted for the Benz Velo of 1894. This model has a place in the history of motoring as the world’s first production car. Production figures for 1885 to 1893 were 69 cars. 67 cars left the factory in 1894, mainly Benz Velos. These figures increased to 135 cars in 1895 and 181 in 1896.

In 1896 the first Benz Kontra-Motor appeared, an engine with two horizontally opposed cylinders. The first Benz lorry was produced in the same year. In 1898 pneumatic tyres were adopted for the Benz Comfortable. Production in 1899 was 572 cars, which brought Benz into the first rank of car producers. This number was surpassed in the following year with a production of 603 units. The first Benz racing car appeared in 1899 and was the start of numerus racing successes.

After 1901 sales of Benz cars declined as Benz stuck to his now outdated designs. Mercedes’ successes led him to evolve new concepts of construction; the result was the 2-cylinder front-engined Parsifal presented in 1903, available with cardan or chain drive and various engine outputs. In the same year a new 4-cylinder engine appeared and was used in all subsequent Benz models. A 1903 racing car developed 60hp and participated in the Paris-Madrid race. Karl Benz himself left the company in 1903 although he rejoined shortly afterwards. In 1906 he joined his sons in the firm of C. Benz Söhne.

1906 saw Benz gaining a second place in the Herkomer Trial while in the same event in 1907 a 5hp Benz finished first. Second and third place in the Coppa Florio, 1907, first place in the Florida 100-Miles Race, 1908, second and third place in the French Grand Prix, 1908, and second and fourth place in the American Grand Prix, 1908, led the world records which were set with 150hp and 200hp Benz cars by Bruce-Brown, Robertson, Oldfield and Hémery. With the 200hp Blitzen Benz Burman covered a mile in 25.4 seconds from a flying start at Daytona Beach in 1911. This was a speed of 140.8mph, but was not recognized internationally as a Land Speed Record.

In 1910 Benz acquired the Süddeutsche Automobil-Fabrik of Gaggenau. Production of private Benz cars in this factory was given up and in the following years Benz concentrated on commercial vehicles there.

A wide range of Benz cars for sale was marketed in the 1910-1914 period, ranging from the 2-litre Benz 8/20ps up to really big machines like the 10.1-litre Benz 39/100ps, all with side valve engines and shaft drive. However, the 22-litre Benz 200hp (which cost £1800 in England in 1912, and must have been the largest-engined private car to go on the market) had ohv and final drive by side chains. Benz were successful in the Austrian Alpine Trials, the Tatra-Adria Trial and various trials in Russia, to name only a few. The great promoter of German motoring, Prince Henry of Prussia, used only Benz cars.

The first Benz 6-cylinder car was produced in 1914 with the type Benz 25/65ps 6.5 litre. In 1918 the Benz 6/18ps 4-cylinder 1540cc appeared, a type developed during the war. A very important Benz development was the precombustion chamber diesel engine. It was first used in 1922 for Benz Sendling agricultural tractors, and the first diesel-engined lorry by Benz appeared in 1924. These were steps towards later Mercedes-Benz diesel-engined cars. Another idea introduced by Benz which also appeared in later Mercedes-Benz cars was the swing axle. It was one feature of the 2-litre 6-cylinder Benz ‘teardrop’ racing car designed on Rumpler principles. However, this car was not a great success either in its racing or in its sports version. In the Grand Prix of Italy in 1923 they gained fourth and fifth place. In 1924 Benz and Mercedes began to combine their interests, amalgamating in 1926.

Source: Georgano, encyclopedia of motorcar; HON

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Morgan

GB, 1905 – 1906

Morgan and Co Ltd, Leighton Buzzard, Beds.

Made by a well-known firm of coachbuilders, the Morgan car was a conventional shaft-driven car with 5.8-litre T-head 4-cylinder Mutel engine, distinguished only by the Sparks-Boothby hydraulic clutch on the Morgan car, soon abandoned in favour of an ordinary leather cone. Only about five Morgan cars were made and their lack of success resulted in Morgan cars becoming Adler concessionaires in 1907, and abandoning motor manufacture.

GB, 1910 to date

Morgan Motor Co Ltd, Malvern Link, Worcs.

This Morgan car was the best-known, and best, of the British 3-wheelers that were popular while the horsepower tax gave the Morgan cars an advantage. H.F.S. Morgan’s tricycle was also the first of its type, this Morgan car going into production in 1910. At the front of a tubular chassis frame was an sv, air-cooled V-twin motor-cycle engine of 1.100cc by JAP, transversely mounted. Transmission of the Morgan car was by dog clutches and chains, providing two forward speeds. The steering was direct. The front wheels of the Morgan car, had independent front suspension, by sliding pillars and coil springs. There were two seats. A reasonable amount of power plus light weight meant an excellent performance of the Morgan cars. The Morgan car was safer than most 3-wheelers because its road-holding was above average. This recipe made the Morgan car popular with sportsmen, for whom the Morgan Grand Prix model was produced in 1914: the first catalogued competition Morgan car. Soon afterwards, an exiguous four-seater Morgan car, the forerunner of the Morgan Family model of the 1920s, was listed.

After World War 1, Morgan carscontinued to cater for all markets. Names changed, but the Morgan Sports or Morgan Standard model was the normal two-seater, also available in De Luxe form; the Morgan Family model was the more capacious type Morgan car, and the long-tailed Morgan Aero, later the Morgan Super Sports, was the Morgan car intended for serious speed work. Engines of Morgan cars were water- or air-cooled to choice, most being supplied by JAP, or by Blackburne in the case of the competition Morgan cars. From 1925 all the latter’s power units had overhead valves. By 1927 the Super Sports Morgan car could attain 80mph in standard trim, while the less sporting Morgan cars now had internal expanding front wheel brakes and electric starting. Geared-down steering and (if required) three forward speeds followed on Morgan cars in 1929. Even so, Morgan cars were losing customers to new, cheap sports cars such as the M-type MG. Three speeds and reverse in a normal gearbox (though still with chain final drive) were available from 1931 and standard on the Morgan car after 1932, and a modified 8hp Ford 4-cylinder engine could later be had in the Morgan car instead of the twin. Four years later the first 4-wheeled Morgan car was introduced, the excellent little Morgan 4/4. This Morgan car used an 1.122cc 4-cylinder Coventry-Climax engine with overhead inlet valves, developing 34bhp. The Morgan car was still light in weight, and retained the Morgan independent front suspension, so the performance and handling qualities of Morgan cars were well up to form. The Morgan car could attain 75mph. The twins were last catalogued in 1939.

Just before World War 2, a 1.267cc Standard 10hp engine with ohv head was substituted in the Morgan 4/4. When this was no longer available, from 1950, Morgan fitted a tuned Standard Vanguard unit in the Morgan car giving 70bhp. In this Morgan Plus Four, as the Morgan car was renamed, performance became still more lively, and when the 90bhp Triumph TR2 engine became available in 1954, maximum speed of the Morgan car rose to 100mph for the first time. With the advent of the Morgan Plus Four, there was no longer a small Morgan car, but this gap was made good in 1955, when the Morgan Series 2 4/4 arrived. This Morgan car used the very hard-wearing 1.172cc sv Ford Ten engine which had powered F4 Morgan. (The latter was the last 3-wheeler Morgan car, which had been made until 1950.) The result was a cheap, pleasant and reliable sports Morgan car of the old school. Later, the ohv Ford 105E engine was substituted. The latest version Morgan car had a 1.599cc 98bhp engine, a 4-speed all-synchromesh gearbox, front disc brakes, and the traditional Morgan suspension. The Morgan Plus Four kept pace with Triumph’s TR engine development, also acquiring disc brakes and, eventually, the 2.138cc 105bhp TR4 unit. A streamlined coupé, the Morgan Plus Four Plus of 1964, was a brief deviation from the classical Morgan car line which met with little approval and was discontinued after only 50 of these Morgan cars had been sold. When Triumph changed to a six during 1968, Morgan cars adopted a new engine for their bigger Morgan cars, and the Morgan Plus Four became the Morgan Plus Eight, powered by Rover’s 3 ½-litre 160bhp V8 and capable of 125mph. The 1973 versions of the Morgan car use the 4-speed all-synchromesh Rover gearbox in place of the Moss box previously fitted.

Source: Georgano, encyclopedia of motorcar; MCS, TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com