The Market; all pre-war cars for sale

Speedometer with odometer both in miles for English car, made by Smiths (M.A.). Type 1040B - 42871/2. Complete with mounting bracket. Diameter housing 6cms. Good condition.

Fuel gauge made by Smiths/UK. Reads up to 10 gallons and 45 litres. In good condition, chromed ring, complete with mounting-bracket. Outer diameter 5 ½ cms. Price includes worldwide postage.

Pair of large vintage sidelights made by Rotax/England. One light is complete with its blurred glass and only has a few small dents, the other light is incomplete and could be used as a spare or to be built up. Marked E (or F) 52 and 59 on the other. Outer diameter 11cms. Length also 11cms. As used on e.g. vintage Sunbeams. Price is for the two...

Pair of rear D-Lights with numberplate-board for English cars. Width 68cms. Good condition. Needs a coat of paint. Can be sent by post. Location: UT HG 6C

Oil pressure gauge of unknown car, most likely American. Reads up to 100 lbs. Complete with pipe connection. Outer diameter 5 ½ cms. Good working condition but housing needs light repair. Price includes worldwide postage.

These are in great condition. Outside is weathered, inside and glass with Robert Bosch name as new. All latches goed. I have more photos. 

As new inside. Outside minimal tiny dents from shelf life. All latches goed.  I have more photos. 

Total diameter 23cm,  Visible glass 178mm , nice and 4mm thick. Hinges and closing screw are good. Inside reflectors are good but missing the bulb fittings. That will be your little project. Also missing one of the little tubes on the rear where the wires go through. You may decide to re-route the wire tubes anyway.  These headlights are clean and ..

Real solid headlight. Just one for front centre of your cyclecar or special.  Good glass.  Insides nice.  Reflector has no silver, will pass as yellow fog light. This headlight has a twist and turn system to close the rim. Not a litle screw and bracket. I have more photos.

Decent solid condition. Some fatigue cracks in the stainless rim need soldering. Inside OK  and good for day/early evening driving. For night driving inside needs re-silvering. I have more photos.