The Market; all pre-war cars for sale

Fiat 1500 6C Kingpin set new/not used  old stock for Dubonnet front axle 1935 - 1940  (Fiat 1500 6C, Fiat 1500B 6C, Fiat 1500C 6C).

Front axle, about 26" between spring centres, 1 1/2" spring width, 42" between king pin centres.  Camber built into stubs.  Whitworth threads on stubs.  Unusual in that it appears 'U' bolts are inverted, would have a drilled plate on top of springs, spring platforms are spring width, no holes for 'U' bolts.

Chassis mounted Spring Hanger, original numbered, some damage.OFFERS 

For sale Panhard Front Stub Axle to fit 7hp motorcar 1902 to 1903Telephone +44 7977933090

Original Molsheim Pitman Arm (  Barre d'accouplement des fusées ).It is 65 cm long from end of thread, to end of thread at the other end.The diametre of the rod is 20 mm. 

                                    Essieu avant  GOBRONTrès bon état

Vend ESSIEU AVANT ROCHET BRUNEAU  1900 ENVIRONtrès bon état

This is a Brineton manufactured Hollow Grand Prix Front Axle.It requires finishing.I am looking for Type 37 parts-rear axle casings,gearbox,dashboard/bulkhead , fuel tank and bodyworkWould prefer to p/x the front axle for Type 37 parts as above.Worldwide Shipping at cost

Differential lock Alfa Romeo 8C could also be P3

6C  Front axle ,complete  with hubs,drop arms and bearings . Brake drums are in good condition ,but there are no brake back plates.Axle is in good unbent condition and stamped with factory number as shown.