An original copper petrol primer can made by Braimes for the Rolls-Royce Silver Ghost toolkit. It is just under 8 inches tall in good condition with a few minor dents. Fully marked ROLLS-ROYCE PETROL. Not tested sold for display. Buyer pays shipping cost.
An all iron 3-speed crash gearbox , centre change with chassis mounting lugs and square input shaft. Fasteners seem AF not Whitworth spanner size and lid bolts are finer than BSF. Internally in excellent order, turns smoothly with no visible damage. I suspect 20’s American but you tell me...? Only casting marks are a triangular symbol and the n..
ENV Preselector gearbox From a Riley 9, also used on MG with some modifications.Complete, with no damage. Been out of the car for around 50 years, but still turns freely and the inside is oily and clean.See the photos for the condition, for more photos please email.
For sale:1 completely rebuilt Armstrong Siddeley Preselector Gearbox to suit K- or N-type Magnette. Fitted with new high ratio gears, bands, bearings, bushes, and seals. 1 a/s to MG bellhousing 1 MG octagonal remote 1 gear box cross tube 1 clutch pedal lin..
As found and will need a rebuild (we can carry this out at an extra cost).This is the short rear output shaft box for use in Delahaye competition chassis's.Comes complete with the bell housing and clutch release arm and bearing.Can ship world wide.
An original Liqall petrol can spout. It is in very good condition and complete. This is the correct one for the Rolls-Royce toolkit having the flexible spout. Buyer pays shipping cost.