The Market; all pre-war cars for sale

Overview of related ads to ad Minerva type DD veteran sleeve valve engine circa 1913

Austin 7, Crankshaft End Timing Gear.

Austin 7, engine front timing gear which fits on the nose of the crankshaft. These are original Austin parts. They have no '+' or '-' markings so must be considered to be for a within tolerances assembly. However, in my experience, timing gear pairs are best matched by fitting as a pair, regardless of marks and measuring the backlash unti..
Austin 7: Set of 14 sump retaining bolts.

A set of very old stock Austin 7 sump retaining bolts. They have the special deep head and are threaded 1/4" B.S.W. Please also note that there are probably cadmium plated as original and should be handled with care as I understand that cadmium may be harmful if ingested! There are 14 bolts in the set.As the item is ..
Early 1898 de Dion bouton engine

Offered here is an early 1898 De Dion-Bouton tricycle engine project. This example features the rare rear-mounted aluminium cam housing, engine number from the early 600 range.Worldwide shipping available at buyer’s expense.
FIAT 505 Ventilator

in good conditionMore pictures and informations on our website can be ordered on our website part number VENT056
INBOARD TWIN-CYLINDER MARINE ENGINE

circa 1920-1925 vertical twin-cylinder Cast-iron Cylinder head and block, aluminium low engineWater cooling, Kick gear starter with manual lever connected to engine shaft missing carburettor and exhaust manifoldDimensions for engine mounting : length 430 mm - width 250 mmthis engine shoud be dissambled an..
HINSTIN CYLINDER HEAD WITH EXHAUST MANIFOLD AND ROCKER-ARMS SHAFT

For Hinstin Cyclecar, 4 cylinders, with visible rocker arms,the valves are seized, probably to be replaced2 Valve springs are missing, we have no springs like this model in our stock,The cylinder head is not restored
Two 1912 Minerva BB Engines for Sale - Good working Condition

Up for sale we have Two 1912 Minerva BB Engines for Sale in Good working Condition. Engine 1 : BB 13424 - Most Complete engine - Just needs Carburettor (Original known of with another owner and can connect - willing to sell).Engine 2 : BB 13008 - Block, Internals & Lower Crank Case all in Good working order.
1936 Alvis Speed 20 SD engine

For sale Alvis Speed 20 SD engine from 1936 ex Car 18017 engine 13492 chassis 13042 UK Reg. BHP 540 For sale is a disassembled Alvis Speed 20 engine. As can be seen in the pictures, almost all the spare parts needed to make this engine running are included. Worldwide shipping possible at extra cost.
CHENARD ET WALCKER 2 BLADES VENTILATOR

2 aluminium blades and integrated pulleywith support propeller lenght 425 mmsee picture with all dimensions Price excluding taxesCan be shipped or pick up in Nogent le Rotrou FRANCE
ROCHET SCHNEIDER 3 BLADES VENTILATOR

Ventilator with bronze pulley and aluminium support. 3 Aluminium bladesDouble Pulley for 2 fan belts. (for one flat fan belt and one trapezoidal fan belt)Tension system by eccentric in upper partBlades diameter 480mm - Support height 210 mm Price excluding taxesCan be shipped or pick up in Nogent le Rotr..