The Market; all pre-war cars for sale

Old wheel wood needs to be replaced, steel parts in good usable condition.

Two spoke wheels  presumably Minerva  Type AL 40HP   €420Pic -Up AntwerpThe wheels weigh 40kg the piece, I've checked the wheel diameter inside !! splines measured top to top in the wheel 110 cm, so on your drive shaft it is slightly more, and they are 136 splines

1925 - 1930 Mercedes Benz Hub cab , Hub and five lug hub, wheel nuts, in original all was chrome plating

Outer diameter 475 mm. Outer width 97 mm. Diameter inner hole 85 mm.In good condition.

These SU H3 carburettors are in good condition and, whilst they would need rebuilding (which I can do for you), all of the service parts are easily available. The throttle shafts are not anywhere near as worn as some I have worked on but for perfection they could have new bushings fitted. I know what the modern replacement parts for these carburett..

1 wheel for Ford T

Barn find .....4x Wheel center (2x destro+2x sinistro) nickel plated) very detailed manufactured in perfect undamaged condition.

An original 12 volt Lucas Altette horn.  It is complete and in very good condition and full working order.  All original correct dome nuts are present etc.  Buyer pays shipping cost.

Original Bugatti wheel in good condintion18 inch  (type 49 ) only 1 leftGood offer wanted

Advance and retard control rod.  Bolts to steering column.  In two sections , top section (what you see  mounted to steering Column) is as per pre war MG (and Morris), lower section could be Wolseley Hornet. You will need threaded sleeve making if you are to use both sections and join together.  Study photo's, what you see if what you get..