New brass oil filler capDimensions:Width: 10,5 cmHeight: 8 cmThickness: 1 cmFinishing is up to you Order this item directly through the weblink on the right side>>
1903 -04 FN Engine, bore looks decent Conrod missing been sold as a restoration project. I also have a spare barrel and half a crank case for the same model. Located in Ireland Co Louth close to NI border.
This study aims to present a comprehensive review of those De Dion Bouton vehicles that entered production between 1899 and the end of 1904. The first volume from the Surrenden Press, De Dion Bouton, An Illustrated Guide to Type & Specification, 1899–1904, was published eight years ago, but space and time constraints prevented the comprehens..
This is the second volume of a series of publications on the De Dion Bouton company. The first volume: ‘An Illustrated Guide to Type & Specification 1899-1904’, published in 2016, documented the development of single and twin motor vehicles in the first five years of production.By the end of 1904, De Dion Bouton had established an en..
Complete tooling for remanufacturing Delahaye 135 MS cylinder heads.With this tooling, it's possible to cast 135 MS cylinder heads in aluminum or cast iron.I can send more photos if you're interested.
Rugby 6 cylinder engine. This is an engine in good condition but the previous owner took 3 conrods with the pistons out. Therefor suitable for parts. In our Dutch warehouse. Only € 950.
One set of std omega piston for Riley 9 , almost new , were in an engine for less than 1/2hr before change of plan , rings are included but new rings available from The Riley register , very minor marks only well below cost + postage at cost
Victrix V.I.4 magneto whit de Dion bouton script cap . Magneto turns free but has no spark at the moment . Missing cover points for questions pleas ask can post worldwide at cost