Instrument board without instruments or gauges, Made by AC division of GMC /Flint. Speedo reads up to 80mph. Measurements 31 x 13cm. One glass broken. For GM car probably Chevrolet.
Instrument board complete with speedometer, oil pressure, fuel & battery charge guages + odometer. Speedo reads up to 100 mph. Made by AC-division of GMC /Flint, Michigan/USA. Unknown for which make of car, probably Chevrolet. Surface rust on panel, all wires still connected
One reconditioned crankshaft, 6 cylinder, 4 main bearings, markings on shaft IS-N No. 397016 with bolt-on counterweights. Most likely a Chrysler group product.
2x Austin 7 heads, 2x Austin 7 blocks, 1x exhaust manifold. Heads Euro 125.- each, blocks Euro 175.- each, or Euro 500 the lot. Markings on heads 1138 & 1438 & B7. All in useable average condition, no cracks. Apologies for the grease marks on the camera lens.
Instrument board without instruments or gauges. Made by AC divison of GMC /Flint. Speedo reads up 100mph. Measurements 31 x 13cm. For GM car, probably Chevrolet
Here we have an Alvis Speed 20 SC engine. Removed from our race car when we fitted a Speed 25 engine. (CJJ 60).The engine has been crack tested and pressure tested. The connecting rods, main bearings have been re white metalled (Formhalls, Salisbury).The pistons are standard compression height, the block has liners.Cylinder ..
Two 4 cyl. Chevrolet engines Nos. R4661897 & R4909611, both complete with clutch, flywheel & distributor & both manifolds, one engine turns round nicely, the other seized (Price Euro 800)rnStamping dates 3.48532 E22-8 and H21-8 (2nd engine) Photos are of 2nd engine. (Sorry for grease marks on lens). Location: ES 1B
One large single cylinder 3hp Andersons stationary engine, last used as a power unit to drive a large water pump. In good condition, No. 9938, made in Christchurch /New Zealand.
One 6 cylinder Chevrolet head (216 CI) in good condition, incl. valves & valve springs. (GM 938401). Apologies for the grease marks on the camera lens.