A.C. 

GB, 1908 to date

(1) Autocars and Accessories Ltd, West Norwood, London S.E. 1908-1911

(2) Autocarriers (1911) Ltd, Thames Ditton, Surrey 1911-1922

(3) A.C. Cars Ltd, Thames Ditton, Surrey 1922 to date

This make succeeded the Weller and was a John Weller design developed from a commercial 3-wheeler, the AutoCarrier (hence the initials) with a single-cylinder rear-mounted moiv engine, 2-speed epicyclic gear and tiller steering. These side-by-side two-seater A.C. Sociables were made up to World War 1 and sold for less than £100, but in 1913 the company brought out a 10hp 4-cylinder light car with a 3-speed gearbox in the rear axle; the engine was a 1.100cc Fivet. A modernized version with electrics and a disc transmission brake appeared with the 1½-litre side valve Anzani engine in 1919, the giving way to A.C.’s own power unit in 1925 – the fours were dropped at the end of 1928. Also at the 1919 London show was Weller’s famous 1.991cc single ohc wet-liner six, an advanced power unit for its day. It did not get into production unitl 1922, but it remained in the catalogue until 1963, by which time output had gone up from around 35bhp to 103bhp. Under the aegis of S.F. Edge, the company’s director from 1921 to 1929, A.C.’s were raced, through their main interest was long-distance record work. A 4-cylinder car took 57 records at Brooklands Track in 1921; J.A. Joyce’s 16-valve ohc 1500cc single-seater covered 100 miles in the hour from a standing start in 1922; and Gillet broke the World’s 24-hour Record at Monthlhéry in 1925 on a 2-litre six. The 6-cylinder car of the Hon. Victore Bruce and W.J. Brunell became the first British entry to win the Monte Carlo Rally in 1926. In 1925 4-cylinder cars sold from £300, the cheapest six being £90 dearer, 4-wheel brakes were an optional extra, being standard on the 2-litre by 1927. All these cars retained the rear-axle gearbox, though the disc transmission brake did not last long.

Financial difficulties supervened in 1929, and virtually no cars were made for a couple of seasons, though the 1930 Magna series boasted hydraulic brakes. Th Hurlock brothers bought the company in 1930, and the 2-litre emerges in 1933 as a sporting machine with mechanical brakes and a conventionally-mounted 4-speed gearbox, in 56bhp and 66bhp versions. These cars were made on a bespoke basis, prices starting at around £435. Pre-selector boxes were available from 1934 and standard 1935 versions had synchromesh, while cars sold in 1936 had engines of 60 and 70bhp with an 80bhp sports engine available in a special short-chassis two-seater model. A 90bhp super-charged engine was listed in 1939.

A.C. resumed car production in 1947 with a saloon in the modern idiom. This had a 74bhp engine, and hydro-mechanical (full hydraulic from 1950) brakes, but retained its semi-elliptical springing up to the end of production in 1957. Some 3-wheeled monocars for invalids were made with 250cc B.S.A. motor cycle engines, and in 1953 came the Petite, a 3-wheeler roll-top convertible with rear-mounted 350cc Villiers power unit; despite a price of under £400, this never really became popular and was dropped in 1958. 1954 saw the advent of the Ace sports two-seater, a tubular-framed machine with all-independent suspension designed by John Tojeiro. With an 85bhp A.C. engine it could top the 199mph mark, and was later made also with 2-litre and 2.2-litre Bristol and 2.6-litre Dagenham Ford engines. Front disc brakes were standardized in 1960. In 1963 this car was developed into the Cobra (inspired by the American Carroll Shelby) with disc brakes all round and a 4.7-litre oversquare American Ford V8 engine developing 330bhp.

A Cobra finished 4th at Le Mans in 1964, but between 1965 and 1968 Shelby American Inc were responsible for the marketing of the 7-litre type, all Cobra production being abandoned in the latter year. From 1966, however, A.C. offered a luxury convertible or hardtop with Frua bodywork and a 7-litre Ford V8 engine, available with a 4-speed manual or an automatic gearbox. This 428 series was continued into 1973 at a price of £7.010. A.C. also made a special single-seater 3-wheeler for invalids with single-gear automatic transmission, wheel or handlebar steering, and fiberglass coupé body, powered by a 500cc 4-stroke twin engine.

Source: Georgano, encyclopedia of motorcars. MCS

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Vulcan

GB, 1902 – 1928

(1) Vulcan Motor Manufacturing and Engineering Co Ltd, Southport, Lancs., 1902 – 1906

(2) Vulcan Motor and Engineering Co Ltd, Southport, Lancs., 1906 – 1928

The Vulcan car firm was better known for commercial vehicles. Private Vulcan cars stemmed from experiments conducted in the 1897-1899 period by the brothers Thomas and Joseph Hampson. A belt-driven single-cylinder voiturette Vulcan car with lateral radiators was shown in 1902, being replaced a year later by a 6hp Vulcan car with armoured wood frame, mechanically-operated inlet valves, and shaft drive. This Vulcan car was listed at only £105, and this Vulcan car was soon followed by a 10hp twin, also T-headed but with a steel frame, selling for £200. 4-cylinder Vulcan cars of 12 and 16hp, still modestly priced, were available in 1905, while the biggest 1906 Vulcan cars, with capacities of 3.1- and 5.2-litres, had gate change. No 2-cylinder Vulcan cars were catalogued after 1908, but a year previously Vulcan cars had joined the ranks of 6-cylinder manufacturers with a 4.8-litre T-headed machine featuring dual ignition and cone clutch, at £600 for a Vulcan car chassis. Unlike other makers, Vulcan cars retained their interest in this type, which Vulcan car had acquired a 4-speed box and had grown to 6-litres by 1908, and the 1909 Vulcan car range consisted of four 4-cylinder cars and the six, all shaft-driven and still with T-heads; the smallest Vulcan car, rated at 12hp, had a 3-speed gearbox and worm drive. A new 3.6-litre six Vulcan car with unit gearbox and worm drive followed in 1911, along with an L-head 2.4-litre fifteen. Worm drive was standardized on the 1912 Vulcan cars, when the bigger Vulcan cars had T-heads, and a 1.8-litre, 2-cylinder with an Aster engine was offered. All but the smallest Vulcan car had detachable wheels as standard in 1913, and by the outbreak of World War 1 the Vulcan car company was well established with a range of solidly-built Vulcan cars: a 2.4-litre 10/15, a 2.6-litre 15.9, and a 3-litre monobloc 15/20 Vulcan car at £375. All these Vulcan cars had L-heads and bull-nose radiators, though the similarly styled six retained the older Vulcan car configuration. A 1½-litre Vulcanette with a 3-speed rear-axle gearbox and full electrical equipment was announced for 1915 but the war intervened.

After 1918 the Vulcan car company concentrated increasingly on trucks, and a brief association with the Harper Bean Group (1919-1920) did no good to finances. Some odd experiments by Vulcan cars included a worm-drive 3½-litre V8 tourer Vulcan car intended to sell for £625 (1919), and two Vulcan cars in 1922 with Howard sleeve-valve engines, a big 3.6-litre sports-touring four Vulcan car and a 10hp 1.4-litre flat-twin listed at £315. However, none of these Vulcan cars reached the public, the regular Vulcan car lines being a 1.8-litre ohv 12 and a 2.6-litre sv 16/20, both with Dorman engines. There was also a conservative 20hp Vulcan carmodel with the Vulcan car company’s own 3.3-litre sv fixed-head engine and 4-speed separate gearbox, this Vulcan car was selling for £850 in 1921; by this time flat radiators were again being used on Vulcan cars. The Vulcan 20 was available to military order with full wireless equipment in 1923, in which year C.B. Wardman effected a liaison of Vulcan cars and Lea-Francis. The two companies pooled their dealer network, Vulcan cars became responsible for certain Lea-Francis power units and bodies, and Lea-Francis made gear and steering boxes for Vulcan cars. A 1½-litre sv Dorman-engined Vulcan 12 was listed at £295 in 1925, followed a year later by an ohv worm-driven derivative, also with Dorman engine, and looking very like a Lea-Francis. 4-wheel brakes were available on Vulcan cars in 1925 and standardized in 1926. Last of the line Vulcan cars were the 14/40 and 16/60, with the disastrous twin ohc 6-cylinder engines of their own make. Short-chassis Vulcan cars were worm-driven, but bevel drive was adopted for long-chassis versions. Vulcan cars wore artillery wheels, but were otherwise identical to their Lea-Francis counterparts which Vulcan cars were made alongside them at Southport. Not many of these Vulcan cars were made, and after 1928 only commercial vehicles were produced. The Vulcan car firm subsequently amalgamated with Tilling-Stevens and thus were abrorbed into the Rootes Group after World War 2. Truck production ceased in 1953.

US, 1913 – 1914

(1) Vulcan Motor Car Co, Painesville, Ohio, 1913

(2) Vulcan Manufacturing Co, Painesville, Ohio, 1913 – 1914

This Vulcan car was a cleanly-designed light car with a 27hp 4-cylinder engine. A two-seater speedster Vulcan car on an 8ft 9in wheelbase with electric lights sold for $750. A five-seater version of this Vulcan car with the same engine, but on a longer wheelbase, cost $850.

Source: Georgano, encyclopedia of motorcar; MCS, GMN    

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com