Adler

D, 1900 – 1939

(1) Adler Fahrradwerke vorm. Heinrich Kleyer AG 1900 – 1906

(2) Adlerwerke vorm. Heinrich Kleyer AG, Frankfurt/Main 1906 – 1939

This well-known bicycle and typewriter firm had already built components for Benz as well as a few De Dion tricycles when their first car appeared in 1900. This closely resembled the contemporary Renault, with tubular frame, shaft drive, and front-mounted 400cc single-cylinder De Dion engine; suspension was full-elliptic all round and steering was by tiller, but both these archaisms had gone by 1901 when a bigger 510cc power unit was standardized. By 1902 the company were making their own engines, an 850cc single and a 1.7-litre twin, there were four forward speeds, and the lateral radiators continued the Renault idiom.

With the arrival of Edmund Rumpler in 1903 the Adler idiom crystallized, even if this experimental swing-axle suspension did not pass beyond the prototype stage. Characteristics of the new models were side valves in an L-head, dual ignition, pressed-steel frames, and rectangular radiators. Four cylinders were preferred, though singles were still offered in 1905, and twins as late as 1909. By 1905 there were 4-cylinder cars of 2.8-litres, 4-litres and 7.4-litres, this last figuring in Adler’s Herkomer Trophy entry, and attracting an order from Kaiser Wilhelm II in 1907. If the 1906 Kleinwagen, a 1.032cc aiv V-twin with water cooling and steel artillery wheels, marked a retrograde step, by 1907 the company had adopted the unit gearbox, and were experimenting with ioe engines, achieving a 3rd place in the Prince Henry trials. There were also some modest short-stroke fours. A 2-litre 8/15ps was followed a year later by the successful 1.555cc 7/15. This developed into the 1.8-litre 7/15, popular in England as the 12hp. These small Adlers had dual ignition, but foot accelerators were found only on the bigger cars as late as 1913. There was a fast 5.2-litre 76bhp ioe model for the 1910 Prince Henry Trials, and a smaller 3.2-litre version was offered to the public. It evolved into the 15/40 of 1913, with 3.8-litre and 69bhp, used as the basis for Adler’s unsuccessful 1914 T.T. racers. Their Knight-engined 1911 cars did not progress beyond the prototype stage, but very attractive was that year’s new model, the 1.3-litre K voiturette, initially with pair-cast cylinders, but offered in 1913 with Monobloc engine and a choice of side-by-side or tandem seats. Rear suspension was full-elliptic. It did 50mhp and 38mpg, and was well received by Britons, who bought it under the name of Morgan-Adler Carette. There were also some large sv fours, the 4.8-litre 19/45 appearing in 1911, followed in 1912 by a 7.8-litre 30/70, and in 1914 by a V-radiatored 9.1-litre monster, top of a nine-model range. Also new was an enlarged K, the 1.552cc KL with four-seater bodywork and semi-elliptic rear springs.

A selection of the more popular 1914 types reappeared in 1919, and even in 1922 a replacement for the KL, the 6/22PS, retained a fixed head and reverted to a separate gearbox. Adler’s first sixes came in 1925, these boasting alloy pistons, detachable heads, and front wheel brakes. The 10/50 had a 2.6-litre Monobloc engine, but the 4.7-litre 18/80 was of biblock type. Also new was an essay in the American idiom, Becker’s 1.550cc 4-cylinder Favorit. Three years later it had been joined by a 2.9-litre six and a 3.9-litre straight-8, both with hydraulic brakes, these being offered on an enlarged and modernized Favorit in 1929. 

At the Geneva Show in 1932 Adler presented their new 1.5-litre Trumpf with front-wheel drive and independent wheel suspension, a design of H.G. Röhr. This first front-driven car was followed by the 1-litre Trumpf Junior, the 1.7-litre Trumpf and the 2-litre model. The competition versions of these models – very often fitted with aerodynamic bodies – were very successful in the years from their appearance to the outbreak of World War 2. Streamlined Trumpf and Trumpf Junior cars gained 22 international records in 1935 and 1936 on the Avus and the Darmstadt Autobahn. A win in the Leinster Trophy Race of 1934, a Team Prize at Spa in 1936 in the 2-litre class, a 2-litre class win and 6th place overall at Le Mans in 1937 were only a few of the victories. In 1937 Adler introduced a rear-wheel driven model again, the 2.5-litre with 6-cylinder 50bhp engine, aerodynamic body and swing axles. The sports version of this type developed 80bhp.

Production of private ceased in 1939. Some prototypes of the Trumpf Junior were produced after the war and were on show at the Hanover Fair 1948, but production was not taken up. Instead of this, production of motorcycles was resumed, lasting until 1957.

Source: Georgano, encyclopedia of motorcar; HON

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Léon Bollee

France, 1895 – 1933

(1) Automobiles Léon Bollée, Le Mans, 1895 – 1924

(2) Morris Motors Ltd, Usines Léon Bollée, Le Mans, 1925 – 1931

(3) Sté Nouvelle Léon Bollée, Le Mans, 1931 – 1933

Leon Bollee was a son of Amédée Bolllée père, the most important pioneer of steam road vehicles in France. Leon Bollee, however, turned to really small petrol Leon Bollee cars. He was the first to do so, and therefore had to invent a new name for his Leon Bollee car of 1895 – he called it a Leon Bollee voiturette. This Leon Bollee car was a tandem two-seater 3-wheeler that was faster than any other petrol-engined vehicle on the road when the Leon Bollee car was working, thanks to a powerful 3hp engine and light weight, but the power unit was unreliable on the Leon Bollee car. The Leon Bollee car had a single air-cooled cylinder of 650cc and used hot-tube ignition. There were 3 forward speeds on the Leon Bollee car, with belt final drive. The frame was tubular. Four years after the Leon Bollee voiturette appeared, Leon Bollee superseded it with a 4-wheeler with independent front suspension by double transverse leaf springs. This Leon Bollee car had a single-cylinder, water-cooled engine. Unlike the Leon Bollee voiturette, this Leon Bollee car made no mark. The design rights were sold to Darracq, and around 1901 the name of Leon Bollee cars vanished. Meanwhile, the term voiturette had been taken up by the trade and public in general as the name for a small light car.

The Leon Bollee car reappeared in 1903 as an entirely normal, full-sized car in the more expensive class, backed by Vanderbilt money and designed for the American market. This Leon Bollee car was made in 28hp (4.6-litres) and 45hp (8-litres) versions, with four cylinders and chain drive, and led on to a 11.9-litre six Leon Bollee car in 1907, in which year the first shaft driven Leon Bollee car appeared. From 1909 there was also a small modern four, the Leon Bollee 10/14hp. The 1910 range embraced 9 Leon Bollee cars, including 2 of over 10-litres capacity. Electric lighting became available on Leon Bollee cars in 1913, but the Leon Bollee grew increasingly old-fashioned after World War 1 despite the introduction of ohv in 1922 on Leon Bollee cars and front wheel brakes in 1923. Late in 1924 Sir William Morris bought the Le Mans Leon Bollee car factory. From making a wide range of conservative French Leon Bollee fours, it turned to thinly-disguised products of Cowley, Oxford, the idea being to breach the French tariff walls from the inside. The first Morris- Leon Bollee had a 12CV 2½-litre 4-cylinder unit-construction engine made by Hotchkiss, the engine manufacturers controlled by Morris, but it had push-rod overhead valves and bore little evidence of its parentage. Not so the 18CV Morris- Leon Bollee car of 1928. This was a 3-litre straight-8 with single overhead camshaft that reflected Morris’ takeover of Wolseley two years earlier. Morris’ own new six of 1928 was mirrored in the 15CV 2.6-litre Le Mans product of 1929. The bodies for the Morris- Leon Bollee car were all made in France and were usually considerably more dashing and attractive than their British counterparts. Chassis of this Morris- Leon Bollee car were made in France, and all cars had a 4-speed gearbox. At one time, 50 12CV Morris- Leon Bollee cars were being turned out each week. However, Morris’ enterprise was not a success, and he discontinued it in the hard times of the Depression. A new syndicate was formed in September 1931 to sell the same range of cars under the name of Leon Bollee cars. This lasted for less than two years and few Leon Bollee cars were made.

Source: Georgano, encyclopedia of motorcar; TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com