Star

GB, 1898 – 1932

Star/ Starling/ Stuart

(1) Star Motor Co, Wolverhampton, Staffs., 1898 – 1902

(2) Star Engineering Co, Wolverhampton, Staffs., 1902 – 1909

(3) Star Cycle Co, Wolverhampton, Staffs., 1905 – 1909

(4) Star Engineering Co Ltd, Wolverhampton, Staffs., 1909 – 1928

(5) Star Motor Co Ltd, Wolverhampton, Staffs., 1928 – 1932

Edward Lisle Sr’s Star Motor Co, an offshoot of the Star Cycle Co, produced its first Star car in 1898, and offered the Star car for sale in the following year. The Star car was a Benz-based machine, with a single-cylinder, water-cooled 3½hp engine, belt primary drive and chain final drive. It was an improvement in that water circulation on the Star car was assisted by a pump. In 1900 there followed a 2-cylinder Star car with 3 forward speeds, still on Benz lines. 1901 brougth De Dion-engined single-cylinder Star cars, and 1902 an 8hp twin of Panhard type in addition. Other, larger Star cars of Panhard ancestry joined the 8hp, up to a 20hp four Star car. By 1904, although a De Dion-powered single and Panhard-type twin were still there, the bigger machines were of Mercédès pattern, these Star cars came with honeycomb radiators, mechanically-operated inlet valves and pressed-steel frames. All veteran Star cars up to 1914 were extremely well-made, well-furnished, conventional, rather expensive cars lacking in technical originality, showing a line of development appearance in the 1907 range. The best-known Star car of the veteran period was the excellent 15hp Star car of 1909, a shaft-driven 2.8-litre four which had become the 3-litre 15.9hp by 1914. A great variety of other Star cars, basically similar models were turned out, not only by Star but also by the Star Cycle Co. The latter, run by Edward Lisle Jr, had made motor tricycles and bicycles, and produced the Starling car in 1905. It had 2 forward speeds and a De Dion single-cylinder engine, but was otherwise of Panhard type, with armoured wood frame and chain drive. One year later the Star car company supplemented it with the more modern Stuart car, which had 2-cylinders, 3-speeds and shaft drive. This name was dropped in 1908, all models being called Starlings, but these too, disappeared in 1909 when Star cars cheaper line was entrusted to the new Brion Motor Co, a more indepented concern that was still run by Edward Lisle Jr. So popular was the Star car that its makers were among the six largest in the country before 1914.

The 15.9hp Star car was continued after World War 1, together with another sv four Star car of pre-war origin, the 20hp Star car of 3.8-litres. A modern light Star car of fashionable type, the 11.9hp, arrived in 1921. This Star car used a 1.795cc sv engine with a detachable head, made in unit with a 3-speed gearbox which had central change. By 1924, the 11.9 Star car had grown up into the 2-litre 12/25hp Star car. It shared cylinder dimensions with the 18hp Star car, which was a new 3-litre six. The 12/25 Star car could be had as a very fine fast touring car with overhead valves and 54bhp, in which form the Star car was called 12/40hp. Thereafter, the Star car range reverted to its pre-war complexity. By 1927, there were three sv Star car models and two additional and more up-to-date Star cars with overhead valves. The 14/40hp Star car, new in 1926, was a solid 2-litre, ohv machine which in spite of having only 4-cylinders and 3 forward speeds, this Star car was a notably smooth and flexible car, thanks to a 5-bearing crankshaft. The ohv 20/60hp Star car, a 2½-litre six with the same bore and stroke as the 14/40 and a 7-bearing crankshaft, was the most luxurious Star car. A light six, the popular ohv 18/50hp, joined the Star car range in 1928, the year of the Star car company’s acquisition by Guy, and replaced the 14/40 Star car for 1929. By this time, the sv Star cars had gone, leaving the two sixes. As the 18hp Star Comet and the 21hp Star Planet, these Star cars were revised with handsome bodies and very full, luxurious equipment, including one-shot chassis lubrication, thermostatically-controlled radiator shutters and a built-in jacking system. Two other engines, of 14hp (2-litres) and 24hp (3.6-litres) were also obtainable in Star cars for 1932, as alternative Comet and Planet power units. These Star car were the last new Star cars, for they were too expensive to make, and the times favoured the mass-produced economy car. Production of Star cars ended in March 1932, but the unsold stock was sold by McKenzie and Denley of Birmingham, and the Star car was quoted in the Buyer’s Guide lists until 1935.

US, 1903 – 1904

(1) Star Automobile Co, Cleveland, Ohio

(2) H.S. Moore, Cleveland, Ohio

This Star car was driven by a single-cylinder, watercooled engine of 1.9-litres, mounted beneath the front seat, with false bonnet and coil radiator in front. A champion planetary transmission and double chain drive was used on this Star car. Both two- and five-seater Star cars were made, the latter with rear entrance.

US, 1908

Star Automobile Co, Chicago, Ill.

Star runabouts were offered in three models, selling for $500, $600 and $700 respectively. The smallest Star car was an open two-seater, and shaft drive was employed on all Star cars.

US, 1908

Model Automobile Co, Peru, Ind.

The short-lived Star car from Peru was offered in conventional 2- and 4-cylinder forms. The twin was chain-driven, while the big, expensive four Star car ($4.000) had shaft drive.

US, 1922 – 1928

Durant Motor Co of New Jersey, Elizabeth, N.J.; Lansing, Mich; Oakland, Calif.

William Crapo Durant’s Star Four was one of the most serious attempts to take away some of the Model T Ford’s market, for the cheapest practical car. Unlike the Ford, the Star car was an assembled machine.The Star car had a 2.2-litre, 4-cylinder engine by Continental, and was conventional in design in every way except the gearbox, which was separate; a feature common to all the vehicles in Durant’s empire, but very unusual in American mass-produced cars by the early 1920s. The touring Star car cost only $443 in 1923, which helped Star to be the seventh biggest seller in America that year. The Star car was sold outside the United States as the Rugby. In 1926, a 2.8-litre six Star car was introduced. Front wheel brakes appeared in 1927 but a year later the Star car make disappeared in the collapse of the Durant interests. By this time, 250 Star cars a day were being turned out. Only the Four was still called the Star car for the 1928 model year, as the Six was now known as the Durant Model 55.

Source: Georgano, encyclopedia of motorcar; TRN, GMN, MJWW, TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Adler

D, 1900 – 1939

(1) Adler Fahrradwerke vorm. Heinrich Kleyer AG 1900 – 1906

(2) Adlerwerke vorm. Heinrich Kleyer AG, Frankfurt/Main 1906 – 1939

This well-known bicycle and typewriter firm had already built components for Benz as well as a few De Dion tricycles when their first car appeared in 1900. This closely resembled the contemporary Renault, with tubular frame, shaft drive, and front-mounted 400cc single-cylinder De Dion engine; suspension was full-elliptic all round and steering was by tiller, but both these archaisms had gone by 1901 when a bigger 510cc power unit was standardized. By 1902 the company were making their own engines, an 850cc single and a 1.7-litre twin, there were four forward speeds, and the lateral radiators continued the Renault idiom.

With the arrival of Edmund Rumpler in 1903 the Adler idiom crystallized, even if this experimental swing-axle suspension did not pass beyond the prototype stage. Characteristics of the new models were side valves in an L-head, dual ignition, pressed-steel frames, and rectangular radiators. Four cylinders were preferred, though singles were still offered in 1905, and twins as late as 1909. By 1905 there were 4-cylinder cars of 2.8-litres, 4-litres and 7.4-litres, this last figuring in Adler’s Herkomer Trophy entry, and attracting an order from Kaiser Wilhelm II in 1907. If the 1906 Kleinwagen, a 1.032cc aiv V-twin with water cooling and steel artillery wheels, marked a retrograde step, by 1907 the company had adopted the unit gearbox, and were experimenting with ioe engines, achieving a 3rd place in the Prince Henry trials. There were also some modest short-stroke fours. A 2-litre 8/15ps was followed a year later by the successful 1.555cc 7/15. This developed into the 1.8-litre 7/15, popular in England as the 12hp. These small Adlers had dual ignition, but foot accelerators were found only on the bigger cars as late as 1913. There was a fast 5.2-litre 76bhp ioe model for the 1910 Prince Henry Trials, and a smaller 3.2-litre version was offered to the public. It evolved into the 15/40 of 1913, with 3.8-litre and 69bhp, used as the basis for Adler’s unsuccessful 1914 T.T. racers. Their Knight-engined 1911 cars did not progress beyond the prototype stage, but very attractive was that year’s new model, the 1.3-litre K voiturette, initially with pair-cast cylinders, but offered in 1913 with Monobloc engine and a choice of side-by-side or tandem seats. Rear suspension was full-elliptic. It did 50mhp and 38mpg, and was well received by Britons, who bought it under the name of Morgan-Adler Carette. There were also some large sv fours, the 4.8-litre 19/45 appearing in 1911, followed in 1912 by a 7.8-litre 30/70, and in 1914 by a V-radiatored 9.1-litre monster, top of a nine-model range. Also new was an enlarged K, the 1.552cc KL with four-seater bodywork and semi-elliptic rear springs.

A selection of the more popular 1914 types reappeared in 1919, and even in 1922 a replacement for the KL, the 6/22PS, retained a fixed head and reverted to a separate gearbox. Adler’s first sixes came in 1925, these boasting alloy pistons, detachable heads, and front wheel brakes. The 10/50 had a 2.6-litre Monobloc engine, but the 4.7-litre 18/80 was of biblock type. Also new was an essay in the American idiom, Becker’s 1.550cc 4-cylinder Favorit. Three years later it had been joined by a 2.9-litre six and a 3.9-litre straight-8, both with hydraulic brakes, these being offered on an enlarged and modernized Favorit in 1929. 

At the Geneva Show in 1932 Adler presented their new 1.5-litre Trumpf with front-wheel drive and independent wheel suspension, a design of H.G. Röhr. This first front-driven car was followed by the 1-litre Trumpf Junior, the 1.7-litre Trumpf and the 2-litre model. The competition versions of these models – very often fitted with aerodynamic bodies – were very successful in the years from their appearance to the outbreak of World War 2. Streamlined Trumpf and Trumpf Junior cars gained 22 international records in 1935 and 1936 on the Avus and the Darmstadt Autobahn. A win in the Leinster Trophy Race of 1934, a Team Prize at Spa in 1936 in the 2-litre class, a 2-litre class win and 6th place overall at Le Mans in 1937 were only a few of the victories. In 1937 Adler introduced a rear-wheel driven model again, the 2.5-litre with 6-cylinder 50bhp engine, aerodynamic body and swing axles. The sports version of this type developed 80bhp.

Production of private ceased in 1939. Some prototypes of the Trumpf Junior were produced after the war and were on show at the Hanover Fair 1948, but production was not taken up. Instead of this, production of motorcycles was resumed, lasting until 1957.

Source: Georgano, encyclopedia of motorcar; HON

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com