Austin

US, 1901 – 1921

Austin Automobile Co, Grand Rapids, Mich.

The early American Austin was known as The Highway King. Despite an output of 50 or less units per year, it was something of a pioneer in a number of ways. The 1902 2-cylinder Austin models were much larger than most contemporary makes and for several years, although colours were optional, most of these big Austin cars for sale were painted either white with tan trim or light brown. By 1911, the Austin cars were equipped with electric lights and left-hand steering. Two years later, Austins featured a highly successful two-speed axle, with wheel-base up to 11ft 10in. After 1915, this Austin company attempted to market smaller and cheaper cars and also introduced a 12-cylinder model in 1917 which was produced until the firm ceased operations. About 1000 cars were made altogether.

GB, 1906 to date

(1) Austin-Motor Co Ltd, Longbridge, Birmingham, 1906 – 1970

(2) Austin-Morris Division, British Leyland Motor Corporation Ltd, Longbridge, Birmingham, 1970 to date

Herbert Austin resigned from the general managership of Wolseley in 1905, and formed his own company: Austin-Motor Co Ltd. Austin did not, however, pursue the development of the horizontal engine, but switched to more conventional designs using sv in-line units with T-heads, separately-cast cylinders and chain drive, first supplemented and then supplanted by shaft-driven cars. Most Austins of the pre-1914 period, were fours, though sixes were marketed from 1908 to 1913, the Austin 60hp being a really big machine of 9.7 litres’ capacity. There was also an Austin 1100cc single for sale in the 1909-1911 period, but this was really a Swift distinguishable only from the Coventry company’s version by its radiator. In 1909 Austin marketed a 15hp 4-cylinder town carriage with cab-over-engine layout at £475; at this time they were also making Gladiators for the British market. In 1910 a 1.6-litre 4-cylinder Austin Ten was made for export only, being introduced to the home market the following year. In 1914, when Austin became a public company, three 4-cylinder Austin models were listed, the largest, a Austin 30 of nearly 6-litres’ capacity, having electric lighting and starting.

After World War 1, Austin tried a one-model policy with a 3.6-litre Monobloc sv 4-cylinder Austin Twenty; the price had to be raised from £495 to £695 during the first year of production, which landed Austin in the hands of the official receiver, though the Austin Twenty car proved a great success and was made and for sale until 1929. Despite financial troubles, however, the Austin company came up in 1921 with their second great vintage design, the 1661cc Austin Twelve, one of the hardest-wearing machines of all time.

Enlarged to 1.9-litres in 1927, it remained in the Austin-catalogue, always with magneto ignition, right up to 1936, and survived in production as a taxicab into the 1940s. Finally, 1922 saw the Austin Seven for sale, one of the greatest of all baby cars; it gave 13bhp from 747cc, killed the cyclecar and boasted 4-wheel brakes, though these were not coupled until late 1930. The pedal worked the front ones and the lever the rear. By 1929, an Austin Seven supercharged sports version had 32bhp, still with a 2-bearing crankshaft; the 3-bearing crankshaft came out with the 1937 Austin Seven models. The Seven was extensively raced by the Austin works; among its countless successes were a third place in the 1929 TT, and a win in the 1930 B.R.D.C. 500-Mile Race at Brooklands. Its descendants were legion; the Austin Seven was made in Germany by Dixi and their successors BMW; In France by Rosengart, In Japan by Datsun and in the USA by the American Austin Co. Even after production ceased at Longbridge at the end of 1938, manufacture of the engine was taken over by Reliant and continued up to 1962.

6-cylinder Austin cars reappeared in the range in 1927 with a 3.4-litre Austin Twenty for sale, usually found with limousine bodywork, followed by a 2 ¼-litre coil-ignition Austin Sixteen for sale in 1928. A less successful 1 ½-litre Austin Six was introduced in 1931, but Austin found another winner in the 1.1-litre Austin Ten for sale in 1932, which was made until 1947. In 1934 the company offered a choice of over 50 models – the Austin Seven, the Austin Ten, a 1 ½-litre Light Austin 12/4, the old Austin Twelve and five Austin Sixes from 1496cc to 3400cc – not to mention semisports versions of some of the smaller Austin cars. Synchromesh was now standard, with the option of the American Hayes automatic gearbox on 16 and 18hp models only. In 1936 the Austin company sponsored a team of three short-stroke twin ohc 750cc supercharged Austin racing cars designed by Murray Jamieson, which had nothing in common with the ordinary Seven except for the transverse-leaf front suspension. Their engines developed 116bhp at 9000rpm and they were raced until the outbreak of World War 2.

Austin styling received a face-lift in 1937, and again in 1939 when alligator bonnets came in with the 900cc 8hp which replaced the Austin Seven, but the image remained the same – solid and well-furnished cars of great durability appealing to the more conservative type of owner. Girling mechanical brakes were used. The first sign of a more progressive attitude came in 1945, when a 2.2-litre ohv 4-cylinder Austin Sixteen came out using the chassis and body of the 1940 Austin Twelve; this proved quite as durable as the famous Austins of the 1920s, and the engine was still being used in taxis and the 4x4 Gipsy in 1967. Coil and wishbone independent front suspension appeared in 1947 on the luxurious and traditionally-styled ohv 4-litre 6-cylinder Austin Sheerline and Austin Princess, and these were followed by the 1.2-litre Austin A40 Dorset and Austin Devon saloons with overhead valves and independently sprung at the front, which did well in America and helped Austin to sell over 85.000 cars in 1928. A further bid for dollar exports came with the big 4-cylinder Austin A90 power-top convertible – successful long-distance record work at Indianapolis failed to attract many buyers, though the engine had a long run in the first Austin-Healeys.

Austin merged with Morris to form the British Motor Corporation in 1952, when there appeared their first unitary-construction car, the 803cc Austin A30. The Healey sports car came under Austin’s aegis that year, and in 1954 Austin-Healeyy started to make the little Metropolitan coupés and convertibles for Nash. In style these were Nash Airflytes in miniature, with 3-speed gearboxes. They were powered initially by the Austin A40 engine and later by the 1 ½-litre Austin A50. Production continued until 1961. From 1955 onwards all Austins save the 4-litre models had unitary construction, new models that year being the Austin Cambridge with A40 and A50 engines, and the 2.6-litre 6-cylinder Austin Westminster. The big Austin Princess saloon went over to automatic transmission in 1957, and these Vanden Plas-bodied models subsequently (in 1960) became a make in their own right, under the name of Vanden Plas Princess. In 1959 the 948cc Austin A40 appeared with Farina styling; this was later made in Italy under licence by Innocenti and pave the way to a rationalized range of 1½-litre saloons in the Farina idiom, made in Morris, MG, Wolsely, and Riley forms as well as the basic Austin Cambridge.

1960 saw a new Austin Seven, the first of Alec Issigonis’s Minis, which Morris sold as the Mini-Minor. It had a 848cc ohv 4-cylinder engine mounted transversely and driving the front wheels, the 4-speed gearbox lived in the sump, all wheels were independently sprung by rubber in torsion, and it had an unmistakable box-like silhouette. The name Mini was soon applied to all versions, Austin as well as Morris, and the car not only became a best-seller, but distinguished itself in competition as well, with numerous rally wins to its credit. Mini-Cooper versions joined the range in 1962, the hottest standard version in 1968 being the 1.275cc Cooper S with 76bhp and front disc brakes; later developments include a 4x4 Mini-Moke for off-the-road travel. Logical developments were the 4-door 1100 saloon with interlinked Hydrolastic suspension (introduced as a Morris in 1963, with an Austin version listed in 1964), and the bigger 1800 of 1965. Minis acquired Hydrolastic suspension in 1965, and all the smaller fwd cars were available with an automatic gearbox in 1967. Both the Mini and the 1100 are made for the Italian market by Innocenti.

Improvements in 1968 included all-synchromesh gearboxes for Minis and an alternative 1275cc engine for the 1100. A special ‘federalized’ version of this Austin 1300, the 2-door Austin America with automatic transmission, went on sale in the USA. At the same time the 6-cylinder A110 gave way to a new 3-litre, combining the Austin 1800’s hull design and Hydrolastic suspension with the existing engine and conventional rear-wheel drive. This one, however, coincided with the merger of B.M.C and Leyland interests in January 1968; it was slow into production, never caught on, and was discontinued in 1971. Later in the year came Mk II versions of the Austin 1800 with 86bhp engines and optional power steering, made as Morrises and Wolseley as well as Austins. An A60 replacement came in 1969; the 1½-litre Maxi in the Issigonis tradition with fwd and transverse engine. New were the 5-bearing engine with chain-driven ohc, the 5-speed all-synchromesh gearbox, and the 5-door semi-estate car body; by 1971 it had acquired a more satisfactory rod-operated gearchange and the option of a 1748cc power unit.

In 1970 rationalization led to the replacement of the MG 1300 by the Austin 1300GT, and that August the former Austin and Nuffield elements in the British Leyland empire (Austin, MG, Morris, Vanden Plas and Wolseley) were merged to form the Austin-Morris devision. Already at the 1969 Earls Court Show the Mini had been made a marque in its own right, and by early 1971 basic versions of the 1100/ 1300 theme were sold as Austins only, Morris variants being dropped. The 3-litre six’s replacement appeared in 1972. This ADO 17 was based on the C6 already announced by British Leyland’s Australian branch, and was in essence an enlarged Maxi on which the transversely-mounted ohc 2.227cc engine drove the front wheels. Basic price was £1.246. With the 1100/1300, the Maxi and the 1800 making up the 1973 range, Austin now offered only fwd cars, a far cry from the conservatism of pre-World War 2 days. Automatic and high-performance variants were also added in 1973.

Source: Georgano, encyclopedia of motorcar; KM, MCS

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Sunbeam

GB, 1899 – 1937, 1953 to date

(1) John Marston Ltd, Wolverhampton, Staffs., 1899 – 1905

(2) Sunbeam Motor Car Co Ltd, Wolverhampton, Staffs., 1905 – 1935

(3) Sunbeam Motors Ltd, London W.11, 1936 – 1937

(4) Sunbeam-Talbot Ltd, Ryton-on-Dunsmore, Warwickshire, 1953 – 1970

(5) Chrysler United Kingdom Ltd, Ryton-on-Dunsmore, Warwickshire, 1970 to date

John Marston’s tinplate and japanware firm, which had been making bicycles since 1887, built its first 4hp belt-driven prototype Sunbeam car in 1899, followed by another machine with a twin-cylinder engine in 1901. The first model Sunbeam car to see series production was, however, the diamond-formation and allegedly skidproof Sunbeam-Mabley voiturette with 2¾hp De Dion engine, a number of which were sold for £130 in the 1901-1904 period. More conventional was the 12hp Sunbeam car marketed under T.C. Pullinger’s direction in 1903, which was based on a Berliet design and had a flitch-plate frame, chain drive with Sunbeam cars patent oil-bath chain cases, and a 2.4-litre 4-cylinder engine with automatic inlet valves. A 3.6-litre 6-cylinder Sunbeam car was on the market briefly in 1904, but Sunbeam cars soon progressed to Shaw-designed T-head fours, though another short-lived six Sunbeam car appeared in 1907. Sunbeam cars great years started in 1909 when Louis Coatalen joined the Sunbeam car firm from Hillman. In that season the Sunbeam car company was offering three L-head fours with chain drive, and capacities of 3.4, 4.5 and 6.3-litres, plus an odd 3.2-litre twin-cylinder Station Cart Sunbeam car. Coatalen’s first effort was a T-headed 14/18hp Sunbeam car, available with either shaft or chain drive. This Sunbeam car was followed a year later by a 2.4-litre 12/16 on similar lines, but with pressure lubrication and on overdrive gearbox, while overhead valves were tried out on a racing Sunbeam car, the Nautilus, at Brooklands in 1910. An improved 12/16 Sunbeam car of 3-litres’ capacity with monobloc engine ran in the 1911 Coupe de l’Auto race, foreshadowing an immensely successful touring development which Sunbeam car sold initially for £375. This Sunbeam car had an L-head engine and was made up to 1921. In 74bhp racing guise the Sunbeam car scored 1-2-3 victory in the 1912 Coupe de l’Auto, following this up with a 3rd place in 1913. In 1914 Sunbeam car company built Henri-inspired twin-ohc 4-cylinder racers both for the Tourist Trophy and for the French Grand Prix, and at the outbreak of World War 1 the Sunbeam car range consisted of the 12/16 in standard and sporting forms, a 4-litre 16/20 Sunbeam car of similar general design, and a 6.1-litre 6-cylinder Sunbeam car rated at 25/30hp, all offered with electric lighting. The Sunbeam car company concentrated on aero engines during the war years, though a 4.9-litre twin-ohc 6-cylinder Sunbeam ca  was sent to Indianapolis in 1916 and took 3rd place, while Rovers took over production of the 12/16 for the Flighting Services. Renamed the 16, this Sunbeam car reappeared in civilian form with full electrical equipment at £790, along with a smaller vesion of the pre-war 25/30 Sunbeam car powered by a 4½-litre engine.

The Sunbeam car company amalgamated with Talbot and Darracq in 1920 to form the STD combine, and the next five years saw an energetic racing programme of Sunbeam cars. Twin-ohc 108bhp straight-8 Sunbeam cars were made for the 3-litre formula of the immediate post-war years, followed by some unsuccessful 2-litre fours, and finally the twin-ohc 6-cylinder ‘Fiats in green paint’, designed by Bertarione, which won the French and Spanish GPs in 1923, and this Sunbeam car ran supercharged in 1924, as well as having a long and distinguished competition career in later years. Chassagne won the Tourist Trophy on a 3-litre straight-8 Sunbeam car in 1922, while one of the regular 3-litre sports Sunbeam cars finished 2nd at Le Mans in 1925. Sunbeam cars took the World’s Land Speed Record five times in the 1922-1927 period: Lee Guiness started with 133.75mph on the 350hp V12 sprint Sunbeam car, a figure which Campbell subsequently raised, first to 146mph on the 4-litre V12, a Sunbeam car which was also used for road racing, and the following year he became the first man to exceed 200mph on land with the twin-engined chain-drive 45-litre Sunbeam car. Sunbeam cars last record car, the Silver Bullet of 1930, was unsuccessful.

Touring Sunbeam carss of the 1920s were cars of great refinement if not outstanding performance. The basic 16 and 24hp types Sunbeam cars were redesigned with push-rod overhead valves in 19222, ohc sporting versions being also listed, while a more modest 2-litre 14hp Sunbeam car with unit gearbox was available at £725. Front-wheel brakes arried on the 6-cylinder 16/50 Sunbeam car in 1924, and were optional also on the 14/40 Sunbeam car which replaced the 14hp model. An impressive 3-litre 6-cylinder twin-ohc sports Sunbeam car with dry-sump engine was made in small numbers between 1925 and 1930, but the Sunbeam car was ‘too fast for its chassis’ as well as being expensive to make and buy. A big straight-8 Sunbeam car with a push-rod engine, available in 4.8-litre and 5.4-litre forms, was introduced in 1926 at prices from £1.295 up and front-wheel brakes became standard on all Sunbeam cars. All Sunbeam cars had the V-radiator by 1927, when the fours were dropped, and the standard touring sixes were the 2-litre 16hp at £550, the 2.9-litre 20hp Sunbeam car at £750, and the 3.6-litre 25hp at £950, all with plate clutches, spiral bevel final drive, and cantilever rear suspension. Thereafter Sunbeam car design changed little, and sales of Sunbeam cars declined though quality was maintained. Semi-elliptic springs were found at the rear of the smaller 1930 Sunbeam carmodels, in 1931 the Sunbeam cars acquired hydraylic brakes and radiator shutters, and the 16’s engine was enlarged to 2.2-litres. The 1932 Sunbeam cars’ silent-third gearboxes gave way to synchromesh on 1933 16 and 20hp Sunbeams. That year there was also a 2.9-litre Speed Model Sunbeam car with crash box at £745, though its main competitor was STD’s other fast tourer, the Talbot 105. The old Sunbeam car firm’s last new model was a ponderous 1.6-litre ohv four, the Sunbeam Dawn of 1934, with preselector gearbox and independent front suspension. This Sunbeam car was offered again in 1935, along with the 20, the 25, and the Speed Model, but the collapse of the STD combine brought receivership and purchased by Rootes, and an ohv Roesch-designed 4½-litre straight-8 Sunbeam car announced for 1937 never went into production. There were no Sunbeams in 1938, and when the Sunbeam-Talbot range was announced for 1939 the Sunbeam car was based on the later Rootes Talbots.

The name of Sunbeam cars did not reappear until 1953, when it was given to a sports two-seater Sunbeam car of the 2.3-litre ohv 4-cylinder Sunbeam-Talbot 90, the Sunbeam Alpine, which sold for £1.269, and this Sunbeam car collected four Coupes des Alpes in that year’s Alpine Rally, following this up with a Gold Cup (for Stirling Moss) and a Coupe des Dames (for Sheila Van Damm) in 1954. In 1955 the basic 90 saloon Sunbeam car was marketed as the Sunbeam MK III, and further laurels included the Malling/ Fadum win in that year’s Monte Carlo rally. The type Sunbeam car was listed until 1957, being joined in 1956 by a Hillman Minx-based sports saloon, the Sunbeam Rapier, with a 1.4-litre square 4-cylinder 62bhp engine, unitary construction, and overdrive as standard equipment, at £986. This Sunbeam car did well in subsequent Alpines and Monte Carlo Rallies, as well as winning its class in the 1956 Mille Miglia, and by 1958 the Sunbeam car had grown up to 1½-litres and 68bhp, acquiring a less Hillman-like grill in the process, though overdrive was now an extra. A sports two-seater Sunbeam car, another Alpine, with integral construction, was listed for 1960, and subsequent evolution was on regular Rootes lines: diaphragm clutches in 1964, with the option of automatic on the Alpine, all-synchromesh gearboxes in 1965, and 1.7-litre 5-bearing engines in 1966. 1964 brought two new developments of the basic theme Sunbeam car, an Italian-bodied Venezia sports saloon based on the Humber Sceptre, and the Tiger Sunbeam car, which was an Alpine with rack-and-pinion steering and a 4.3-litre, 164bhp Ford V8 engine, this despite the Rootes-Chrysler conncection. In 1966, the Rapier V, Alpine V, and Tiger comprised the Sunbeam car name. A 51bhp Sunbeam car-version of the Imp was available in the home market in 1967, and this Sunbeam car was followed by the more sporting Stiletto coupé for 1968.

An entirely new Rapier Sunbeam car on Hillman Hunter lines was announced for that year, its fastback styling inspired by Plymouth’s Barracuda. It had an 88bhp engine, a close-ratio gearbox, and overdrive as standard.

During 1968 the old Sunbeam Alpine was discontinued (the Tiger had already gone), and the Rapier range was rounded out, first by the H120 of 1969 with twin-carburettor Holbay-tuned engine giving 105bhp and Rostyle wheels, and then by the Alpine, a simplified version of the basic theme introduced for 1970. These three fastback Sunbeam cars were still being made in 1973, along with the Sunbeam Sport based on the Imp saloon. The Stiletto was discontinued during 1972.

Source: Georgano, encyclopedia of motorcar; MCS

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com