B.M.W.

D, 1928 to date

(1) Bayerische Motoren-Werke, Eisenach, Munich, 1928 – 1939

(2) Bayerische Motoren-Werke AG, Munich, 1952 to date

The BMW firm developed from the Bayerische Flugzeug-Werke, Munich founded in 1916 for the production of aero engines. In 1922 the name was changed to Bayerische Motoren-Werke, and production of engines for boats, lorries and motor cycles began. In 1923 the first BMW motor cycle appeared. In 1928 the Eisenach Dixi works were acquired and car production began with the BMW-Dixi, an Austin Seven built under license. BMW car production was carried on in Eisenach, while production of BMW motorcycles remained in Munich. The BMW-Dixi was succeeded in 1932 by the 800cc BMW 3/20ps model with tubular backbone chassis and independent suspension.

In 1933 came the first 6-cylinder model, the BMW 303 for sale). The range of sixes continued with the ‘BMW 315’(1.490cc, 34 and 40bhp) and ‘BMW 319’ (1.911cc, 45 and 55bhp). The triple-carburettor sports versions of these BMW cars laid the foundation for the famous BMW sports cars, noted for their speed and appearance. The engine of the ‘BMW 326’ (1971cc, 50bhp) became the basis for the ‘BMW 327’ and ‘BMW 328’. The BMW 327 used the 55bhp engine, while the most successful BMW 328 developed 80bhp. Two of this model’s most remarkable successes amongst many in races, rallies and trials were a class win at Le Mans and the winning of the 1940 abbreviated Mille Miglia. The ‘BMW 327/328’ used an 80bhp engine in the ‘BMW 327’ longer wheelbase chassis and was also very successful in competitions. The last pre-World War 2 model was the ‘BMW 335’ with a 3.485cc 90bhp engine. It was intended for the British market and only a few hundred BMW 335’s were built. From 1935 to 1939 BMW’s were imported into the United Kingdom and marketed under the name of Frazer Nash-BMW.

The Eisenach factory was lost through nationalization in 1945. Production of BMW motorcycles was taken up again in the Munich factory and facilities for BMW car production were prepared. The first Munich-built BMW car appeared in 1952, the ‘BMW 501’ with a 6-cylinder 1.971cc engine, based on the last pre-war designs. This started the range of 6- and 8-cylinder prestige BMW cars. The last of this range was the ‘BMW 3200’ CS 2-door coupé with 3.2-litre 160bhp engine for sale. In 1955 BMW started production of the Isetta bubble car under licence, and this was followed in 1957 by the BMW ‘600’ 4-seater based on it. In 1960 the ‘BMW 700’ appeared with a 697cc air-cooled opposed twin-cylinder engine mounted in the rear. In 1962 BMW began to produce medium sized cars again, bringing out the 4-cylinder ‘BMW 1500’ (80bhp), which was developed into the ‘BMW 1800’(90bhp). The ‘BMW 1800TI’ and the ‘BMW 1800 TI/SA’ were tuned versions developing 110 and 130bhp respectively. In 1965 the ‘BMW 2000 C’ (100bhp) and the ‘BMW 2000 TI’ (120bhp) coupés appeared. In 1966 the ‘BMW 1600’ (83bhp), the ‘BMW 2000’ (100bhp) and the ‘BMW 2000 TI’ (120bhp) with 4-cylinder in-line engines of 1573cc and 1990cc capacity were added to the range. In 1967 the Frazer Nash-BMW name was revived for a special luxury model of the ‘BMW 2000TI’, selling in England for £1830. New for 1968 were the BMW 2002 for sale, combining the 135bhp 2-litre engine with the BMW 1600 chassis, and the BMW 1600GT, which used the body of the former Glas 1700, a result of the BMW-Glas merger of 1967. In 1969 the BMW company produced their first six since 1958, the BMW 2500. Mechanically this derived from the existing fours, but was powered by a 170bhp 2494cc 7-bearing engine. A bigger 2.8-litre version was also available By 1971 BMW were offering a 2985cc version with either twin carburetors or Bosch fuel injection; in the latter form it gave 200bhp. Also new in 1971 was a semi-estate car, the Touring, available in 1600, 1800, or 2000 guise. BMW ran a Formula 2 team in 1969, using special 1.6-litre engines in British Lola chassis, but though there were several victories in 1970, the BMW company retired from his branch of the sport after two seasons. The 1973 range embraced the 1600, 1800, 2000, and the sixes, as well as a new ohc BMW 520 for sale with 1990c 4-cylinder engine, wishbone and trailing-link front suspension, and saloon bodywork in the 2500 idiom. Options included 115bhp twin-carburettor or 130bhp fuel-injection models, and a choice of 4- and 5-speed manual and automatic transmissions. A 200bhp derivative of this unit powered a prototype mid-engined coupé, the turbo, with all-disc brakes.

Source: Georgano, encyclopedia of motorcar; HON

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Morgan

GB, 1905 – 1906

Morgan and Co Ltd, Leighton Buzzard, Beds.

Made by a well-known firm of coachbuilders, the Morgan car was a conventional shaft-driven car with 5.8-litre T-head 4-cylinder Mutel engine, distinguished only by the Sparks-Boothby hydraulic clutch on the Morgan car, soon abandoned in favour of an ordinary leather cone. Only about five Morgan cars were made and their lack of success resulted in Morgan cars becoming Adler concessionaires in 1907, and abandoning motor manufacture.

GB, 1910 to date

Morgan Motor Co Ltd, Malvern Link, Worcs.

This Morgan car was the best-known, and best, of the British 3-wheelers that were popular while the horsepower tax gave the Morgan cars an advantage. H.F.S. Morgan’s tricycle was also the first of its type, this Morgan car going into production in 1910. At the front of a tubular chassis frame was an sv, air-cooled V-twin motor-cycle engine of 1.100cc by JAP, transversely mounted. Transmission of the Morgan car was by dog clutches and chains, providing two forward speeds. The steering was direct. The front wheels of the Morgan car, had independent front suspension, by sliding pillars and coil springs. There were two seats. A reasonable amount of power plus light weight meant an excellent performance of the Morgan cars. The Morgan car was safer than most 3-wheelers because its road-holding was above average. This recipe made the Morgan car popular with sportsmen, for whom the Morgan Grand Prix model was produced in 1914: the first catalogued competition Morgan car. Soon afterwards, an exiguous four-seater Morgan car, the forerunner of the Morgan Family model of the 1920s, was listed.

After World War 1, Morgan carscontinued to cater for all markets. Names changed, but the Morgan Sports or Morgan Standard model was the normal two-seater, also available in De Luxe form; the Morgan Family model was the more capacious type Morgan car, and the long-tailed Morgan Aero, later the Morgan Super Sports, was the Morgan car intended for serious speed work. Engines of Morgan cars were water- or air-cooled to choice, most being supplied by JAP, or by Blackburne in the case of the competition Morgan cars. From 1925 all the latter’s power units had overhead valves. By 1927 the Super Sports Morgan car could attain 80mph in standard trim, while the less sporting Morgan cars now had internal expanding front wheel brakes and electric starting. Geared-down steering and (if required) three forward speeds followed on Morgan cars in 1929. Even so, Morgan cars were losing customers to new, cheap sports cars such as the M-type MG. Three speeds and reverse in a normal gearbox (though still with chain final drive) were available from 1931 and standard on the Morgan car after 1932, and a modified 8hp Ford 4-cylinder engine could later be had in the Morgan car instead of the twin. Four years later the first 4-wheeled Morgan car was introduced, the excellent little Morgan 4/4. This Morgan car used an 1.122cc 4-cylinder Coventry-Climax engine with overhead inlet valves, developing 34bhp. The Morgan car was still light in weight, and retained the Morgan independent front suspension, so the performance and handling qualities of Morgan cars were well up to form. The Morgan car could attain 75mph. The twins were last catalogued in 1939.

Just before World War 2, a 1.267cc Standard 10hp engine with ohv head was substituted in the Morgan 4/4. When this was no longer available, from 1950, Morgan fitted a tuned Standard Vanguard unit in the Morgan car giving 70bhp. In this Morgan Plus Four, as the Morgan car was renamed, performance became still more lively, and when the 90bhp Triumph TR2 engine became available in 1954, maximum speed of the Morgan car rose to 100mph for the first time. With the advent of the Morgan Plus Four, there was no longer a small Morgan car, but this gap was made good in 1955, when the Morgan Series 2 4/4 arrived. This Morgan car used the very hard-wearing 1.172cc sv Ford Ten engine which had powered F4 Morgan. (The latter was the last 3-wheeler Morgan car, which had been made until 1950.) The result was a cheap, pleasant and reliable sports Morgan car of the old school. Later, the ohv Ford 105E engine was substituted. The latest version Morgan car had a 1.599cc 98bhp engine, a 4-speed all-synchromesh gearbox, front disc brakes, and the traditional Morgan suspension. The Morgan Plus Four kept pace with Triumph’s TR engine development, also acquiring disc brakes and, eventually, the 2.138cc 105bhp TR4 unit. A streamlined coupé, the Morgan Plus Four Plus of 1964, was a brief deviation from the classical Morgan car line which met with little approval and was discontinued after only 50 of these Morgan cars had been sold. When Triumph changed to a six during 1968, Morgan cars adopted a new engine for their bigger Morgan cars, and the Morgan Plus Four became the Morgan Plus Eight, powered by Rover’s 3 ½-litre 160bhp V8 and capable of 125mph. The 1973 versions of the Morgan car use the 4-speed all-synchromesh Rover gearbox in place of the Moss box previously fitted.

Source: Georgano, encyclopedia of motorcar; MCS, TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com