B.M.W.

D, 1928 to date

(1) Bayerische Motoren-Werke, Eisenach, Munich, 1928 – 1939

(2) Bayerische Motoren-Werke AG, Munich, 1952 to date

The BMW firm developed from the Bayerische Flugzeug-Werke, Munich founded in 1916 for the production of aero engines. In 1922 the name was changed to Bayerische Motoren-Werke, and production of engines for boats, lorries and motor cycles began. In 1923 the first BMW motor cycle appeared. In 1928 the Eisenach Dixi works were acquired and car production began with the BMW-Dixi, an Austin Seven built under license. BMW car production was carried on in Eisenach, while production of BMW motorcycles remained in Munich. The BMW-Dixi was succeeded in 1932 by the 800cc BMW 3/20ps model with tubular backbone chassis and independent suspension.

In 1933 came the first 6-cylinder model, the BMW 303 for sale). The range of sixes continued with the ‘BMW 315’(1.490cc, 34 and 40bhp) and ‘BMW 319’ (1.911cc, 45 and 55bhp). The triple-carburettor sports versions of these BMW cars laid the foundation for the famous BMW sports cars, noted for their speed and appearance. The engine of the ‘BMW 326’ (1971cc, 50bhp) became the basis for the ‘BMW 327’ and ‘BMW 328’. The BMW 327 used the 55bhp engine, while the most successful BMW 328 developed 80bhp. Two of this model’s most remarkable successes amongst many in races, rallies and trials were a class win at Le Mans and the winning of the 1940 abbreviated Mille Miglia. The ‘BMW 327/328’ used an 80bhp engine in the ‘BMW 327’ longer wheelbase chassis and was also very successful in competitions. The last pre-World War 2 model was the ‘BMW 335’ with a 3.485cc 90bhp engine. It was intended for the British market and only a few hundred BMW 335’s were built. From 1935 to 1939 BMW’s were imported into the United Kingdom and marketed under the name of Frazer Nash-BMW.

The Eisenach factory was lost through nationalization in 1945. Production of BMW motorcycles was taken up again in the Munich factory and facilities for BMW car production were prepared. The first Munich-built BMW car appeared in 1952, the ‘BMW 501’ with a 6-cylinder 1.971cc engine, based on the last pre-war designs. This started the range of 6- and 8-cylinder prestige BMW cars. The last of this range was the ‘BMW 3200’ CS 2-door coupé with 3.2-litre 160bhp engine for sale. In 1955 BMW started production of the Isetta bubble car under licence, and this was followed in 1957 by the BMW ‘600’ 4-seater based on it. In 1960 the ‘BMW 700’ appeared with a 697cc air-cooled opposed twin-cylinder engine mounted in the rear. In 1962 BMW began to produce medium sized cars again, bringing out the 4-cylinder ‘BMW 1500’ (80bhp), which was developed into the ‘BMW 1800’(90bhp). The ‘BMW 1800TI’ and the ‘BMW 1800 TI/SA’ were tuned versions developing 110 and 130bhp respectively. In 1965 the ‘BMW 2000 C’ (100bhp) and the ‘BMW 2000 TI’ (120bhp) coupés appeared. In 1966 the ‘BMW 1600’ (83bhp), the ‘BMW 2000’ (100bhp) and the ‘BMW 2000 TI’ (120bhp) with 4-cylinder in-line engines of 1573cc and 1990cc capacity were added to the range. In 1967 the Frazer Nash-BMW name was revived for a special luxury model of the ‘BMW 2000TI’, selling in England for £1830. New for 1968 were the BMW 2002 for sale, combining the 135bhp 2-litre engine with the BMW 1600 chassis, and the BMW 1600GT, which used the body of the former Glas 1700, a result of the BMW-Glas merger of 1967. In 1969 the BMW company produced their first six since 1958, the BMW 2500. Mechanically this derived from the existing fours, but was powered by a 170bhp 2494cc 7-bearing engine. A bigger 2.8-litre version was also available By 1971 BMW were offering a 2985cc version with either twin carburetors or Bosch fuel injection; in the latter form it gave 200bhp. Also new in 1971 was a semi-estate car, the Touring, available in 1600, 1800, or 2000 guise. BMW ran a Formula 2 team in 1969, using special 1.6-litre engines in British Lola chassis, but though there were several victories in 1970, the BMW company retired from his branch of the sport after two seasons. The 1973 range embraced the 1600, 1800, 2000, and the sixes, as well as a new ohc BMW 520 for sale with 1990c 4-cylinder engine, wishbone and trailing-link front suspension, and saloon bodywork in the 2500 idiom. Options included 115bhp twin-carburettor or 130bhp fuel-injection models, and a choice of 4- and 5-speed manual and automatic transmissions. A 200bhp derivative of this unit powered a prototype mid-engined coupé, the turbo, with all-disc brakes.

Source: Georgano, encyclopedia of motorcar; HON

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Stoewer

D, 1899 – 1939

(1) Gebrüder Stoewer, Fabrik für Motorfahrzeuge, Stettin, 1899 – 1916

(2) Stoewer-Werke AG vorm. Gebr. Stoewer, Stettin, 1916 – 1939

The Stoewer car factory developed out of the Stoewer ironworks and was among the pioneers of the German car industry. After manufacturing motor cycles, tricycles and quadricycles for two years, Stoewer turned to cars in 1899. The first Stoewer car had a rear-mounted 2-cylinder engine. 4-cylinder Stoewer cars followed in 1901, and electric Stoewer cars were also produced. Best known were the 2-cylinder Type T Stoewer car (2.280cc and 3/12PS), the 4-cylinder Stoewer P4 (3.052cc and 11/22PS), the Stoewer G4 (1.500cc and 6/12PS) and the 6-cylinder Stoewer P6 (8.820cc and 34/60PS), evolved in the 1905-1907 period all Stoewer cars with shaft-drive. The Stoewer B1 of 6/16PS and the Stoewer B6 of 9/22PS which appeared in 1910 were also built by Mathis under licence. The G4 Stoewer car was the basis for the Stoewer B5, which Stoewer car in 1912 became famous by setting up a record at Brooklands with 67.7mph. The new range of Stoewer cars which appeared in 1913 was also based on successful earlier cars. They were the Stoewer C1 (6/18PS), Stoewer C2 (10/28PS) and C3 Stoewer car (6-cylinder and 19/45PS). Shortly before the outbreak of World War 1 the Stoewer car range was headed by the F4 Stoewer car with a 4-cylinder, 8.8-litre 33/100PS ohc engine. After the war an enormous Stoewer car appeared, the Stoewer D7, using a 6-cylinder 11.2-litre 42/120PS aero engine, as well as some conservative sv 4- and 6-cylinder Stoewer cars with rear wheel and transmission brakes. Front wheel brakes appeared on Stoewer cars in 1925. Stoewer introduced 8-cylinder Stoewer cars in 1928. These were the Stoewer Superior, Stoewer Marschall, Stoewer Gigant and Stoewer Repräsentant with engines ranging from 2-litres and 45bhp to 4.9-litres and 100bhp. The Stoewer car firm re-entered the economy class in 1931 with the V5, a front-driven Stoewer car with a V4 1.188cc engine, followed by the front-drive models R140 (1.369cc), R150 (1.488cc) and R180 (1.769cc). Another 8-cylinder was the front wheel drive Greif V8 with a 2.488cc engine, which was replaced by the conventional 6-cylinder 3.609cc Arcona Stoewer car in 1938. In 1934 the 1½-litre 4-cylinder Stoewer car and 2½-litre V8 Stoewer car were shown at the Brussels Salon by Monsieur Dewaet under the name D.S. (Dewaet-Stoewer). The Greif Junior was built under Tatra licence with an opposed 4-cylinder 1.474cc engine. It succeeded the Röhr Junior. In the middle of the range was the Stoewer Sedina with a 4-cylinder engine of 2.4-litres.

Production of private Stoewer cars was given up at the outbreak of World War 2 in 1939. The Stoewer car factory was destroyed during the war and production of Stoewer cars was not resumed.

Source: Georgano, encyclopedia of motorcar; HON   

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com