Star

GB, 1898 – 1932

Star/ Starling/ Stuart

(1) Star Motor Co, Wolverhampton, Staffs., 1898 – 1902

(2) Star Engineering Co, Wolverhampton, Staffs., 1902 – 1909

(3) Star Cycle Co, Wolverhampton, Staffs., 1905 – 1909

(4) Star Engineering Co Ltd, Wolverhampton, Staffs., 1909 – 1928

(5) Star Motor Co Ltd, Wolverhampton, Staffs., 1928 – 1932

Edward Lisle Sr’s Star Motor Co, an offshoot of the Star Cycle Co, produced its first Star car in 1898, and offered the Star car for sale in the following year. The Star car was a Benz-based machine, with a single-cylinder, water-cooled 3½hp engine, belt primary drive and chain final drive. It was an improvement in that water circulation on the Star car was assisted by a pump. In 1900 there followed a 2-cylinder Star car with 3 forward speeds, still on Benz lines. 1901 brougth De Dion-engined single-cylinder Star cars, and 1902 an 8hp twin of Panhard type in addition. Other, larger Star cars of Panhard ancestry joined the 8hp, up to a 20hp four Star car. By 1904, although a De Dion-powered single and Panhard-type twin were still there, the bigger machines were of Mercédès pattern, these Star cars came with honeycomb radiators, mechanically-operated inlet valves and pressed-steel frames. All veteran Star cars up to 1914 were extremely well-made, well-furnished, conventional, rather expensive cars lacking in technical originality, showing a line of development appearance in the 1907 range. The best-known Star car of the veteran period was the excellent 15hp Star car of 1909, a shaft-driven 2.8-litre four which had become the 3-litre 15.9hp by 1914. A great variety of other Star cars, basically similar models were turned out, not only by Star but also by the Star Cycle Co. The latter, run by Edward Lisle Jr, had made motor tricycles and bicycles, and produced the Starling car in 1905. It had 2 forward speeds and a De Dion single-cylinder engine, but was otherwise of Panhard type, with armoured wood frame and chain drive. One year later the Star car company supplemented it with the more modern Stuart car, which had 2-cylinders, 3-speeds and shaft drive. This name was dropped in 1908, all models being called Starlings, but these too, disappeared in 1909 when Star cars cheaper line was entrusted to the new Brion Motor Co, a more indepented concern that was still run by Edward Lisle Jr. So popular was the Star car that its makers were among the six largest in the country before 1914.

The 15.9hp Star car was continued after World War 1, together with another sv four Star car of pre-war origin, the 20hp Star car of 3.8-litres. A modern light Star car of fashionable type, the 11.9hp, arrived in 1921. This Star car used a 1.795cc sv engine with a detachable head, made in unit with a 3-speed gearbox which had central change. By 1924, the 11.9 Star car had grown up into the 2-litre 12/25hp Star car. It shared cylinder dimensions with the 18hp Star car, which was a new 3-litre six. The 12/25 Star car could be had as a very fine fast touring car with overhead valves and 54bhp, in which form the Star car was called 12/40hp. Thereafter, the Star car range reverted to its pre-war complexity. By 1927, there were three sv Star car models and two additional and more up-to-date Star cars with overhead valves. The 14/40hp Star car, new in 1926, was a solid 2-litre, ohv machine which in spite of having only 4-cylinders and 3 forward speeds, this Star car was a notably smooth and flexible car, thanks to a 5-bearing crankshaft. The ohv 20/60hp Star car, a 2½-litre six with the same bore and stroke as the 14/40 and a 7-bearing crankshaft, was the most luxurious Star car. A light six, the popular ohv 18/50hp, joined the Star car range in 1928, the year of the Star car company’s acquisition by Guy, and replaced the 14/40 Star car for 1929. By this time, the sv Star cars had gone, leaving the two sixes. As the 18hp Star Comet and the 21hp Star Planet, these Star cars were revised with handsome bodies and very full, luxurious equipment, including one-shot chassis lubrication, thermostatically-controlled radiator shutters and a built-in jacking system. Two other engines, of 14hp (2-litres) and 24hp (3.6-litres) were also obtainable in Star cars for 1932, as alternative Comet and Planet power units. These Star car were the last new Star cars, for they were too expensive to make, and the times favoured the mass-produced economy car. Production of Star cars ended in March 1932, but the unsold stock was sold by McKenzie and Denley of Birmingham, and the Star car was quoted in the Buyer’s Guide lists until 1935.

US, 1903 – 1904

(1) Star Automobile Co, Cleveland, Ohio

(2) H.S. Moore, Cleveland, Ohio

This Star car was driven by a single-cylinder, watercooled engine of 1.9-litres, mounted beneath the front seat, with false bonnet and coil radiator in front. A champion planetary transmission and double chain drive was used on this Star car. Both two- and five-seater Star cars were made, the latter with rear entrance.

US, 1908

Star Automobile Co, Chicago, Ill.

Star runabouts were offered in three models, selling for $500, $600 and $700 respectively. The smallest Star car was an open two-seater, and shaft drive was employed on all Star cars.

US, 1908

Model Automobile Co, Peru, Ind.

The short-lived Star car from Peru was offered in conventional 2- and 4-cylinder forms. The twin was chain-driven, while the big, expensive four Star car ($4.000) had shaft drive.

US, 1922 – 1928

Durant Motor Co of New Jersey, Elizabeth, N.J.; Lansing, Mich; Oakland, Calif.

William Crapo Durant’s Star Four was one of the most serious attempts to take away some of the Model T Ford’s market, for the cheapest practical car. Unlike the Ford, the Star car was an assembled machine.The Star car had a 2.2-litre, 4-cylinder engine by Continental, and was conventional in design in every way except the gearbox, which was separate; a feature common to all the vehicles in Durant’s empire, but very unusual in American mass-produced cars by the early 1920s. The touring Star car cost only $443 in 1923, which helped Star to be the seventh biggest seller in America that year. The Star car was sold outside the United States as the Rugby. In 1926, a 2.8-litre six Star car was introduced. Front wheel brakes appeared in 1927 but a year later the Star car make disappeared in the collapse of the Durant interests. By this time, 250 Star cars a day were being turned out. Only the Four was still called the Star car for the 1928 model year, as the Six was now known as the Durant Model 55.

Source: Georgano, encyclopedia of motorcar; TRN, GMN, MJWW, TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

B.S.A.

GB, 1907 – 1926, 1933 – 1936

Birmingham Small Arms Co Ltd, Sparkbrook, Birmingham, Coventry

In 1907 the famous Midlands arms manufacturers began to make cars as a sideline. They were not entirely new to the field, having made parts for the Roots in 1897. Neither then nor later did they show much originality in their BSA cars. E.E. Baguley, formerly of Ryknield, was in charge, and later produced in 1908, a copy of the successful 40hp Itala from Italy. Other conventional, medium-sized BSA fours followed in small quantities. The major change that followed in 1911, after the company’s takeover of Daimler, was the adoption of Knight double sleeve-valve engines, as used by the latter concern, in BSA cars. These differed from Daimlers in being generally smaller and lighter. The first, the BSA Twelve of about two litres, weighed only 1.232lb in chassis form. Open bodies were of pressed steel from 1912: a single, important innovation that went largely unregarded. BSA also made the Stoneleigh, which was a BSA except for name and radiator, from then until 1914. It should nog be confused with the better-known Stoneleigh light car of the 1920s.
The first post-war BSA was a light car – an attempt to cash in on the boom in popular motoring, but superior to a great many. The BSA Ten of 1921 was powered by an air-cooled V-twin engine of modern design, with overhead valves, coil ignition, aluminium crankcase, and aluminium pistons in iron liners. This BSA developed 18bhp from a cubic capacity of 1080cc, and was made by Hotchkiss of Coventry. This power unit was smooth and though, like all of its kind, it was noisy, it was eventually made quieter by improvements. The rear axle of the BSA Ten with its underslung worm drive on Lanchester patents, was always silent. This uncharacteristic quality helped to sell the BSA Ten well until it was dropped in 1924. The next BSA’s were in fact small Daimlers, with 6-cylinder Knight double-sleeve-valve engines of under two litres. They were discontinued in 1926. From 1933 to 1936, this policy was resumed. In 1931, BSA had taken over Lanchester and introduced a line of completely new Lanchesters as cheap Daimlers. In turn, a still cheaper range christened BSA’s followed from 1933, consisting of a machine basically similar to the Lanchester: a BSA Ten but with a side-valve engine, and a BSA Light Six identical to its Lanchester opposite number. These BSA cars were made in the Daimler factory at Coventry. After 1936, no more cars came from the motor car division of BSA.

GB, 1929 – 1940

B.S.A. Cycles Ltd, Small Heath, Birmingham

In 1924 Hotchkiss, makers of proprietary engines for other car firms, were taken over by their main customer, William Morris. They had also made an excellent 1100cc, V-twin, air-cooled engine with overhead valves for the Birmingham Small Arms Company, for use in that company’s BSA light car (this engine also powered the short-lived Hotchkiss light car itself). BSA Cycles Ltd (the motor cycle division of BSA) acquired manufacturing rights in the engine to drive, in 1-litre form, the front wheels of a 3-wheeler of very modern conception with independent front suspension. This, the famous BSA Beeza, first appeared in 1929, ready for the 1930 season. In 1933 flexibility was added to the BSA’s virtues when a water-cooled 1100cc 4-cylinder sv engine became available. In the previous year, the BSA manufacturers had already tried to attract a wider market by adding a solid axle and another wheel at the rear. This became the BSA Nine in 1933. The front wheel drive BSA 4-wheeler was dropped for a season, but reappeared as the 9hp BSA Scout in 1935. From 1936 to 1940 the Scout in 1200cc BSA Ten form was the only BSA sold, the 2- and 4-cylinder 3-wheelers having been dropped in the former year. There was talk in the early 1950s of resuming production of a small BSA car with a 2-cylinder air-cooled engine, but it came to nothing.

Source: Georgano, encyclopedia of motorcar; TRN
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com