Chrysler

US, 1923 to date

Chrysler Corporation, Detroit, Mich.

Walter P. Chrysler, formerly of Buick and Willys, acquired Maxwell-Chalmers in 1923, and the first car to bear his name, the 6-cylinder ‘Chrysler 70’ of 1924, was something of a sensation with its 4-wheel contracting hydraulic brakes and 70mph performance. At $1645 for a Chrysler sedan, 43.000 were sold in 1925. The 1926 Chrysler range was widened to include a 3-litre 4-cylinder ‘Chrysler 58’ to replace the Maxwell and the expensive 4.7-litre 6-cylinder Chrysler Imperial, selling for $3095. The 6-cylinder roadsters offered an excellent road performance for a modest price, as was shown by their 3rd and 4th places at Le Mans in 1928, behind a Bentley and a Stutz. The 1929 Chrysler models had internal-expanding brakes and their body styling and ribbon-type radiator shells were widely imitated in Europe over the next few years.
Meanwhile Chrysler had laid the foundations for a motor empire to rival General Motors and Ford by taking over Dodge and launchin two new makes, the Plymouth Four in the lowest price sector, and the De Soto Six in a slightly higher bracket – all this in 1928. Chrysler sold 98.000 cars in 1929. The 1931 Chrysler cars featured the long, low look inspired by the Cord of 1929; 4-speed gearboxes were offered for  a short while and for the first time a brace of straight-8s featured in the Chrysler range – the medium-priced Chrysler CD, and the 6.3-litre Chrysler CG-type Imperial for the carriage trade, often with bodies by Le Baron. 1932 saw fully flexible rubber engine mountings (‘Floating Power’), automatic clutches and free wheels. Synchromesh followed a year later. Automatic overdrive was available in 1934 on Chrysler, and regular equipment by 1936. The Chrysler line for 1934 was spearheaded by the revolutionary CD-type 8-cylinder Chrysler Airflow, with welded unitary construction of chassis and body, all seats within the wheelbase, headlamps mounted flush in the wings, a full aerodynamic shape and concealed luggage accommodation. At $1345 it was a commercial failure, though it was continued till 1937. Chrysler hurriedly brought out the more conventionally styled Chrysler Airstream line in 1935, and for the next twenty years the Chrysler company’s styling policy was cautious, though technical progress is represented by the adoption of independent front suspension and hypoid rear axles (for sale in 1937), steering-column gear-change (for sale in 1939) and optional fluid drive from 1939 onward.
The 1942 Chrysler cars for sale, generally competitive with GM’s Buick, embraced two 4.1-litre sixes and three 5.3-litre eights, all side-valve, with prices from $1295 for the Chrysler Windsor to $3965 for the Chrysler Crown Imperial limousine on the 12ft 1½in wheelbase.  

Early post-war design followed the 1942 Chrysler models closely, apart from some interesting ‘Town and Country’ bodies, basically standard sedans and convertibles with wooden exterior trim in station-wagon style. In 1951, however, Chrysler broke new ground with a 5.4-litre overhead valve oversquare V8 with hemispherical heads, a fully automatic transmission and the option of hydraulic power-assisted steering. This was at the time America’s most powerful car and Chrysler engines were fitted and raced by Allard and Cunningham. Caliper disc brakes were optional, but were dropped after a few years, while another individual feature of Chrysler Corporation products was the push-button layout of controls for the automatic transmission, found on Chrysler cars made between 1956 and 1965. Chrysler’s lag in styling was painfully apparent in 1954, when the Chrysler group lay a bad third behind GM and Ford, and 1955 not only saw the retirement of the old side-valve six in favour of a 4.9-litre 188bhp V8, but also new, lower ‘Flight Sweep’ lines which put the Chrysler cars well back in the running. A new range of ‘Chrysler 300’ coupés and convertibles gave Chrysler a ‘personal car’ competitive with Ford’s Thunderbird and the 6¼-litre V8s used in the 1957 Chrysler cars developed more bhp than any of their rivals. Alternator ignition and unitary construction of chassis and body were adopted in 1960, while Chrysler, who had had a gas-turbine car running experimentally in 1954, built a series of fifty vehicles using Plymouth running gear in 1964 which were supplied to selected customers for evaluation.
The 1960s also saw the corporation extend its motor-car interests into Europe by the acquisition of majority interests in Simca of France and the Rootes Group of Great Britain. Another overseas venture was Chrysler Australia Ltd of Adelaide. Chrysler’s V8 engine was also used by Facel Vega in France, and by Bristol and Jensen in Britain. Chyrsler’s 1968 cars were all V8s in the $3300 - $4600 price class, with 6.3-litre or 7.2-litre engines. Automatic transmission was standard on the more expensive Chrysler New Yorkers and the 350bhp Chrysler 300 coupé. There were no major changes in subsequent years, though the general derating of American power units was reflected by the standardization of 5.9-litre, 6.6-litre and 7.2-litre V8 in 1972 and 1973, with outputs ranging from 175bhp to 245bhp. Between 1955 and 1967 a handful of special-bodied Chryslers, Dodges and Plymouths with Ghia coachwork were sold under the Dual-Ghia name.

Source: Georgano, encyclopedia of motorcar; MCS 
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Vulcan

GB, 1902 – 1928

(1) Vulcan Motor Manufacturing and Engineering Co Ltd, Southport, Lancs., 1902 – 1906

(2) Vulcan Motor and Engineering Co Ltd, Southport, Lancs., 1906 – 1928

The Vulcan car firm was better known for commercial vehicles. Private Vulcan cars stemmed from experiments conducted in the 1897-1899 period by the brothers Thomas and Joseph Hampson. A belt-driven single-cylinder voiturette Vulcan car with lateral radiators was shown in 1902, being replaced a year later by a 6hp Vulcan car with armoured wood frame, mechanically-operated inlet valves, and shaft drive. This Vulcan car was listed at only £105, and this Vulcan car was soon followed by a 10hp twin, also T-headed but with a steel frame, selling for £200. 4-cylinder Vulcan cars of 12 and 16hp, still modestly priced, were available in 1905, while the biggest 1906 Vulcan cars, with capacities of 3.1- and 5.2-litres, had gate change. No 2-cylinder Vulcan cars were catalogued after 1908, but a year previously Vulcan cars had joined the ranks of 6-cylinder manufacturers with a 4.8-litre T-headed machine featuring dual ignition and cone clutch, at £600 for a Vulcan car chassis. Unlike other makers, Vulcan cars retained their interest in this type, which Vulcan car had acquired a 4-speed box and had grown to 6-litres by 1908, and the 1909 Vulcan car range consisted of four 4-cylinder cars and the six, all shaft-driven and still with T-heads; the smallest Vulcan car, rated at 12hp, had a 3-speed gearbox and worm drive. A new 3.6-litre six Vulcan car with unit gearbox and worm drive followed in 1911, along with an L-head 2.4-litre fifteen. Worm drive was standardized on the 1912 Vulcan cars, when the bigger Vulcan cars had T-heads, and a 1.8-litre, 2-cylinder with an Aster engine was offered. All but the smallest Vulcan car had detachable wheels as standard in 1913, and by the outbreak of World War 1 the Vulcan car company was well established with a range of solidly-built Vulcan cars: a 2.4-litre 10/15, a 2.6-litre 15.9, and a 3-litre monobloc 15/20 Vulcan car at £375. All these Vulcan cars had L-heads and bull-nose radiators, though the similarly styled six retained the older Vulcan car configuration. A 1½-litre Vulcanette with a 3-speed rear-axle gearbox and full electrical equipment was announced for 1915 but the war intervened.

After 1918 the Vulcan car company concentrated increasingly on trucks, and a brief association with the Harper Bean Group (1919-1920) did no good to finances. Some odd experiments by Vulcan cars included a worm-drive 3½-litre V8 tourer Vulcan car intended to sell for £625 (1919), and two Vulcan cars in 1922 with Howard sleeve-valve engines, a big 3.6-litre sports-touring four Vulcan car and a 10hp 1.4-litre flat-twin listed at £315. However, none of these Vulcan cars reached the public, the regular Vulcan car lines being a 1.8-litre ohv 12 and a 2.6-litre sv 16/20, both with Dorman engines. There was also a conservative 20hp Vulcan carmodel with the Vulcan car company’s own 3.3-litre sv fixed-head engine and 4-speed separate gearbox, this Vulcan car was selling for £850 in 1921; by this time flat radiators were again being used on Vulcan cars. The Vulcan 20 was available to military order with full wireless equipment in 1923, in which year C.B. Wardman effected a liaison of Vulcan cars and Lea-Francis. The two companies pooled their dealer network, Vulcan cars became responsible for certain Lea-Francis power units and bodies, and Lea-Francis made gear and steering boxes for Vulcan cars. A 1½-litre sv Dorman-engined Vulcan 12 was listed at £295 in 1925, followed a year later by an ohv worm-driven derivative, also with Dorman engine, and looking very like a Lea-Francis. 4-wheel brakes were available on Vulcan cars in 1925 and standardized in 1926. Last of the line Vulcan cars were the 14/40 and 16/60, with the disastrous twin ohc 6-cylinder engines of their own make. Short-chassis Vulcan cars were worm-driven, but bevel drive was adopted for long-chassis versions. Vulcan cars wore artillery wheels, but were otherwise identical to their Lea-Francis counterparts which Vulcan cars were made alongside them at Southport. Not many of these Vulcan cars were made, and after 1928 only commercial vehicles were produced. The Vulcan car firm subsequently amalgamated with Tilling-Stevens and thus were abrorbed into the Rootes Group after World War 2. Truck production ceased in 1953.

US, 1913 – 1914

(1) Vulcan Motor Car Co, Painesville, Ohio, 1913

(2) Vulcan Manufacturing Co, Painesville, Ohio, 1913 – 1914

This Vulcan car was a cleanly-designed light car with a 27hp 4-cylinder engine. A two-seater speedster Vulcan car on an 8ft 9in wheelbase with electric lights sold for $750. A five-seater version of this Vulcan car with the same engine, but on a longer wheelbase, cost $850.

Source: Georgano, encyclopedia of motorcar; MCS, GMN    

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com