Darracq , Talbot Suresnes

France, 1896 – 1959

(1) Société A. Darracq, Suresnes, 1896 – 1905

(2) A. Darracq & Co (1905) Ltd, Suresnes, 1905 – 1920

(3) Automobiles Talbot, Suresnes, 1920 – 1959

An immense complexity of nomenclature surrounds the two makes, Darracq and Talbot Suresnes. While the cars themselves were always designed and built in France, the Darracq company was financed in England during its golden period and after (1905-1935), then merged with a French concern which had been formed to make Italian cars, and subsequently acquired American affiliations. Alexandre Darracq founded the Gladiator cycle company in 1891, selling out to British interests five years later. Darracq then turned briefly to the manufacture of electric carriages, exhibiting a Darracq coupé at the 1896 Paris Salon. In 1898, however, he acquired (for £10.000) the manufacturing rights of Léon Bollée’s 4-wheeler voiturette, a belt-driven 5hp machine with a single-cylinder air-cooled horizontal engine, tube ignition and steering-column gear-change. It was not a success, though column change was to persist on some of Darracq’s own designs until 1910.

The idea of a small and inexpensive Darracq runabout persisted, and in 1900 came the first real Darracq: its 785cc front-mounted vertical single-cylinder engine had automatic inlet valves, coil ignition, a cone clutch and shaft drive – Alexandre Darracq, like Louis Renault, never marketed a chain-driven car. The Darracq could be bought in England for £250 in 1901, in which year the Société Darracq took up racing with a 1.9-litre 2-cylinder machine driven by Henry Farman. Though only ‘Darracq singles’ were offered to the public in 1902, racing Darracq cars were formidable voiturettes with 5.9-litre 4-cylinder engines and won the light-car category of the Concours du Ministre alcohol race, besides doing well in the Paris-Vienna. A manufacturing licence for Germany was taken out by Opel that year. Darracq cars were raced until 1906, winning the light-car and voiturette categories of the Circuit des Ardennes. The Darracq company’s grandes voitures were less successful: Darracq was determined to win the 1904 Gordon Bennett Cup and entered not only his Darracq own team of 11.3-litre machines for the French éliminatoire, but also sponsored three Opel-built cars in Germany, with another three Darracq cars specially built from scratch by Weir of Glasgow, to carry the British colours. Only von Opel’s Opel-Darracq actually raced at Homburg and this failed to survive a single lap. Some very light 9.9-litre ohv Darracq cars were prepared for 1905, but it was not until the following season that a twofold success was achieved: Wagner’s victory in the Vanderbilt Cup, and Algernon Lee Guinness’s 117.66mph over the kilometer at Ostend on a special 22.5-litre ohv V8 Darracq sprint car. Darracq cars took 2nd and 3rd places in the 1908 TT but no more were raced until 1921.

Meanwhile the utility cars prospered. Single-, twin- and 4-cylinder Darracq models were marketed in 1903, all but the smallest having mechanically-operated side valves in a T-head, while the simplified 8hp Darracq Populaire sold for only 4.800fr in France. 1904 saw the introduction of steel frames pressed out of a single sheet of metal and also the advent of the rapid 3.1-litre 4-cylinder Darracq Flying 15 for sale at £460. The new type of chassis was universal by 1905, when the Darracq company was reorganized under British registry, and some quite big Darracq car were offered, though these were modestly priced, at the top of the regular range being a 5.9-litre 28hp with dual ignition and a 12ft 4in wheelbase at only £687. It was also possible to buy a 70hp Darracq sporting model based on the 1904 Gordon Bennett cars.

The 1907 1100cc single Darracq sold for £159 and had mechanically-operated valves, but at the other end of the range there were the 4.7-litre ‘20/28’, the 11½-litre ohv ‘Vanderbilt Cup’ type, and a 5.7-litre 4-speed six Darracq selling for £850. This had grown up to 8.1-litres with square cylinder dimensions a year later, though Darracqs still had a progressive gear change, and there was a short vogue for rear-axle-mounted gearboxes on a brace of new L-head monobloc fours with 2.3-litre and 3.1-litre engines. This transmission was dropped in 1909, the last year of ‘Darracq singles’, and the twins disappeared twelve months later. Gate change arrived in 1910 on Darracq cars for sale. In 1911 there were seven Darracq models, the 15hp at £275 having overhead inlet valves. The 1912 p Darracq rogramme, however, saw a catastrophic flirtation with the Henriod rotary-valve engine, installed in the 4.4-litre P12 4-cylinder with a 10ft 5in wheelbase, worm drive and dashboard radiator. A 2.6-litre rotary-valve Darracq model had conventional cooling arrangements, but profits faded away to almost nothing, and in the ensuing upheaval M. Darracq retired. Owen Clegg from Rover took over the management and the 1913 Darracq cars were obviously inspired by his successful Rover Twelve. They came in 2.1-litre and 2.9-litre sizes with L-head Monobloc-cylinder engines and worm drive and very soon the Darracq firm was back on a sound footing. Additional to the 1914 range was a 4-litre ’ Darracq 20/30’ and the 16hp Darracq was sold with electric lighting and starting. This latter Darracq model went back into production in 1919 and was joined shortly afterward by an advanced 4.6-litre sv V8 with coil ignition and spiral bevel final drive, which had acquired 4-wheel brakes by the time it reached the production stage.

In June 1920 the British firms of Sunbeam and Talbot, who had joined forces in 1919, merged with Darracq and thenceforward nomenclature becomes complex. For the first few years after the amalgamation, the term ‘Talbot-Darracq’ was freely used on both sides of the Channel, but strictly the cars were ‘Talbot’ (pronounced à la Francaise) in Europe, and ‘Darracq’ in the British Commonwealth up to 1939. The new combine Talbot and Darracq supported racing, though the very successful Henry-designed twin ohc 4-cylinder differential-less voiturettes evolved in 1922 ran indiscriminately as Talbots and Darracqs. They and their descendants were, however, conceived and designed at Suresnes and victories included the 200-Mile Race at Brooklands (1922 running unblown, 1924 and 1925 in supercharged form), the Coupe des Voiturettes (1922 and 1923), and the Penya Rhin race (1923). 1926 saw a team of advanced blown twin ohc 1½-litre straight-8s which never really proved themselves before Sunbeam-Talbot-Darracq’s precarious finances forced a withdrawal from racing in 1927.

In the touring-car field, Sunbeam-Talbot-Darracq settled down to fifteen years of competing against themselves. A 3.2-litre sv 15hp Darracq with detachable head appeared in 1921, still with worm drive, and this was followed a year later by a small ohv 970cc Darracq machine with no differential and coil ignition, made also in England as the 8/18 Talbot, and the first of a line of 1½-litre ohv fours, the 10CV, selling at £595. Worm drive was dropped, and fwb had spread to the smaller Darracq cars in 1924 with the 2.1-litre Darracq DS – in sports form this was said to give 57bhp – but though the firm reverted to magneto ignition they retained wood wheels (still found on some Darracq cars as late as 1931) and 3-speed gearboxes. A year later the 1½-litre Darracq had grown up into the handsome ‘Darracq 12/32’ with 4-wheel brakes and Weymann saloon bodywork; this theme was continued until 1928, by which time the car had a 1.7-litre engine and four forward speeds. Late in 1925 came the first of a long line of ohv push-rod sixes on conventional lines, with 3-speed gearboxes, single-plate clutches, magneto ignition and Perrot-type fwb: the 2.5-litre Darracq TLA gave 72bhp and sold for £800. Both an extra forward ratio and the option of a 2.9-litre unti came the following year. 1928 saw a real light six of 2 litres’ capacity with coil ignition, Talbot’s bi-metal pistons and Bendiz brakes. Only 6-cylinder cars were marketed for sale by Darracq in 1929, when 7-bearing crankshafts and centralized chassis lubrication made their appearance, while the inevitable straight-8 was listed for 1930: it featured a 3.8-litre 100mhp engine with a 9-bearing crank and nitralloy liners, and could be had on an 11ft 10in wheelbase. The next major facelift came in 1933, with box-section frames and transverse ifs on the sixes and eights. Only one 6-cylinder Darracq model was catalogued in 1934, the year in which Darracq followed the lead of Roesch at Talbot by adopting the Wilson preselective gearbox which was retained until 1954.

After the collapse of Sunbeam-Talbot-Darracq Motors in 1935 the Suresness factory came under the control of Major A.F. Lago, who had been well known in London for his L.A.P. ohv conversions in the 1920s. Lago introduced a new line of 6-cylinder ohv cars retaining the X-braced frames and ifs, while synchromesh gearboxes were available on the cheaper variants. The 2.7-litre Darracq 15CV and 3-litre Darracq 17CV were pleasant but not particularly lively tourers, but the 4-litre Darracq 23CV with 7-bearing crank disposed of 165bhp in its Lago Special guise with cross-push-rod valve gear and hemispherical head, and would comfortably exceed 100mph. A 1-2-3- victory in the 1937 French sports-car Grand Prix at Montlhéry in 1937 was followed up by Comotti’s win in the TT. Under the 1938 GP formula the cars were less successful – stripped sports machines could do nothing against Mercedes-Benz and Auto-Union, while the low offset 1939 4½-litre single-seaters were not much faster. A 3-litre blown V16 engine never came to anything, any more than did a plan laid in 1937 to revive the Invicta name by building 3-litre and 4-litre Darracqs with Delage-style bodywork in London.

After World War 2, however, the 4½-litre racers (now ‘Talbot’ or ‘Lago-Talbot’, never ‘Darracq’) came into their own. What they lacked in power they made up in modest fuel consumption, and could often go through a race without refueling, an attribute not shared by blown 1½-litre machines. Chiron’s win at Comminges in 1947 was a prelude to a career that spanned four seasons, and was backed by Rosier’s 1950 Le Mans victory on a similar machine with sketchy road equipment. Pierre Levegh would have repeated this in 1952, against Mercedes-Benz, had he not attempted a single-handed drive for the 24 hours. Touring-car production was hampered by crippling taxation and uncertain finances: 433 cars were sold in 1950, but only 80 in 1951. In spite of this M. Lago had a revised 4½-litre 170bhp Lago Record sports car with hydraulic brakes in production in 1946, following it up with a simpler and cheaper corss-pushrod four, the 2.7-litre Baby in 1950. This was said to have 118bhp, had hydraulic brakes and the choice of synchromesh or preselector, and was offered only with rhd; but it was not a particularly good car, and its styling did not enhance it. By 1952 the range had been restyled, but though Lago was extracting 247bhp from his Le Mans engines, he met with no success, and henceforward the road lay downhill. Various engines were tried: in 1955 there was a 5-bearing 2½-litre four on established Talbot lines, with a 4-speed ZF gearbox and handsome GT-style bodywork. In 1956 Maserati 250 engines were fitted in the Le Mans cars and in 1957, when two cars were still being turned out every week, a final attempt was made to earn dollars with the Lago America, the 1955 chassis with a 2.6-litre BMW V8 power unit. By 1959 Simca were in control at Suresnes, and the Talbot coupé had yet another engine – the old sv V8 motor inherited from Ford of France. Though an odd-looking coupé with Simca Aronde engine was shown on the Talbot stand at the 1960 Paris Salon, no more cars have been made. It is ironic to note that the three partners in the Sunbeam-Talbot- Darracq venture were re-united once more as a result of the Rootes-Chrysler deal in 1965, Chrysler already having a substantial stake in Simca.

Source: Georgano, encyclopedia of motorcar; MCS

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Standard

GB, 1903 – 1963

Standard Motor Co Ltd, Coventry, Warwickshire

R.W. Maudslay’s company started modestly with a single-cylinder Standard car with an under-floor engine of markedly oversquare (5x3in) dimensions, which was the work of Alex Craig who also designed for Maudslay (made by the same family as the Standard cars founder), Lea-Francis, and Singer. A 12/15hp bonneted twin Standard car was also available, while 4-cylinder engines were offered as proprietary units. In 1906 Standard cars offered Britain’s first inexpensive sixes with side valves, 3-speed gearboxes, and shaft drive; a fairly large 24/30hp Standard car being followed by a really big 50hp Standard car at £850, and a 3.3-litre Standard 20 at £450, these Standard cars being energetically marketed in London by Charles Friswell. 6-cylinder Standard cars dominated Standard design for several years, the Standard 20 doing well in its subsequent 4-litre form; a fleet of 70 Standard cars was shipped to India for the Delhi Durbar in 1911. The shouldered radiator of the Standard car first carried the Union Jack badge in 1908. In 1909 a 2.7-litre 4-cylinder 14 with cylinders cast in pairs was being offered for £350, other fours following until the sixes Standard cars were finally dropped at the end of 1912. A big car in miniature, the 9.5hp Standard Rhyl, was announced in 1913 with a 3-speed gearbox, worm drive, and all brakes on the rear wheels, this Standard car was priced at £185. Electric lighting was available on the Standard car in 1915, and at the outbreak of World War 1 there were also two bigger Standard cars, both sv monobloc fours with capacities of 2.4- and 3.3-litres.

In 1919 an enlarged 1.3-litre version of the Standard Rhyl, the Standard SLS, was the staple product of Standard cars, but this had grown up by 1921 into the 11.6hp Standard SLO with exposed overhead valves – these early Vintage Standard cars also had no sides to their radiator shells. There was a short-lived ohv 8hp in 1922, but the most successful mid-Vintage Standard car was the 13.9hp SLO4, this Standard car still was with overhead valves and worm drive, which had rigid side-curtains and the Standard car could be bought for £375 in 1924. From 1923 these Standard cars carried the emblem of the 9th Roman Legion as their radiator mascot. 10.000 Standard cars were sold in 1924, Front-wheel brakes were standard on the 13.9hp Standard cars in 1926. Some less successful 2.2-litre ohv 6-cylinder Standard cars were marketed in 1927, in which year saloon Standard cars could be bought with sliding roofs, while financial difficulties of the Standard car company were circumvented by the hurried introduction of the very reliable 1.155cc worm-drive Standard Nine car with an sv engine and fabric bodywork for 1928. Within a year a roomier, longer-wheelbase version of this Standard car was listed, as well as supercharged and unsupercharged sports two-seater Standard cars, and the first of the Avon Standard Specials, a low-built two-seater styled by the Jensen brothers, had made its appearance. The Avon, both in its original form and in its later manifestations (the work of C.F. Beauvais) continued in a variety of semi-catalogue forms on many Standard car chassis from the Standard Nine to the 20hp Standard car up to 1937. 1929 was the year of chromium plating on Standard cars, of the first of a line of sv sixes with coil ignition and 7-bearing crankshafts that was to persist up to 1940, and of the appointment of Captain J.P. Black, from Hillman, as Managing Director. Under his control Standard cars rode out the Depression with steadily increasing sales, but at the cost of magneto ignition, worm-driven back axles and the traditional radiator, all of which had disappeared on the Standard car by 1931, when Standard car company were offering the Standard Big Nine, a really roomy small saloon for less than £200, and low-priced 16 and 20hp six Standard cars. This range of Standard cars was rounded out in 1932 by a 1-litre Standard Little Nine at £155, and in this year William Lyons, whose 1930 Swallow-bodies Standard cars had anticipated the new 1931 radiator, launched his first S.S. cars. These used specially-built Standard car chassis and his own style of bodywork, and were to evolve into the Jaguar. Standard-built engines were used in all Lyon’s cars up to 1940 and survived on 4-cylinder Jaguars until 1948. Cruciform-braced frames and silent-third gearboxes were features of the 1933 Standard cars, while that year’s complex Standard car range included a couple of short-lived sixes of under 1.500cc, the option of preselector gearboxes on some Standard cars, and a long-wheelbase 20hp Standard car landaulette. Synchromesh, free wheels and integral boots came in 1934, when a new best-seller Standard car was the well-equipped 1.3-litre Standard Ten, and there were six Standard car models for 1935, including a sporting 10/12hp Standard car consisting of a Standard Ten chassis and body, and a 1.6-litre twin-carburettor 12hp engine. Much of the same Standard cars were offered in 1936, but this year also brought the fastback Flying Standard cars with luggage accommodation and spare wheels streamlined into the tail, though retaining the Bendix brakes of earlier versions of Standard cars. Initially offered only in 12, 16, and 20hp sizes, the style of this Standard car was universal by 1937, when buyers had the choice of four 4-cylinder Standard car and two 6-cylinder types, form the Standard Nine at £149 to the Standard Twenty at £299, as well as a rapid compact V8 Standard car with a 2.7-litre 80bhp sv engine in a Standard Twelve chassis. This Standard car failed to catch on, though its fencer’s mask grille was found on all Standard cars from 1938 to 1947, and the engine was used by Raymond Mays. Other makers buying components from Standard were Railton, whose Ten was based on a Standard car chassis, and Morgan, for whom a special ohv 10hp engine was made by the Standard car company from 1939 – 1950.

A 1939 Standard car best seller was the 1-litre Standard Eight at £129, the first British small saloon with independent front suspension: similar layouts were found on Super versions of the Ten and Twelve, but this year’s Flying Standard cars no longer had fastbacks. Of the extensive pre-World War 2 range of Standard cars, only the Eight, Twelve, and Fourteen were continued after the war, the Fourteen using a 1.8-litre engine in the Twelve chassis, although Standard car products now included Triumph, acquired in 1945.

Late in 1947 came the Standard car company’s first true post-war design, the unitary-construction Standard Vanguard with a 2.1-litre ohv wet-liner 4-cylinder engine, full width six-seater bodywork, hydraulic brakes, and a 3-speed gearbox with column change. This Standard car sold for £544, though for some time the Standard car was practically unobtainable on the home market, and was the only Standard car model catalogued between 1949 and 1953. Standard cars were made under licence in Belgium by Imperia, and the Standard car engine also went into the bigger Triumphs, the Ferguson tractor, the earlier Plus-Four Morgan, and, in 2-litre form, into Triumph’s successful TR series. Overdrive became an option in 1950 on Standard cars; the body was restyled in 1953, 1956, and 1959; a diesel version with separate chassis was marketed in 1954 and 1955; and a luxury Sportsman verion with a 90bhp engine, a traditional grille, and overdrive as standard appeared in 1957, though this Standard car was too expensive at £1.231, and did not last long. Towards the end automatic Standard Vanguards were available, but the tough old four Standard car was dropped in 1961.

There were other Standard cars. An 803cc ohv Standard Eight with coil-spring independent front suspension and very basic appointments was announced late in 1953 at £481, followed shortly after by a more luxurious Standard car with 948cc 10hp at £581. These Standard cars were quite best-sellers despite such later options as 2-pedal control, triple overdrive (on the Standard Eight) and the addition of a luxury Pennant version of the Standard Ten in 1957. Fairthrope used this engine, which later served as the basis for the Triumph Herald, but production of the small Standard cars tailed off in 1959. There were other variations on the Vanguard theme: the Standard Ensign with a 1.6-litre 62bhp engine was cooly received, though the Standard car was revived in 1962 with a 75bhp 2.138cc unit and 4-speed gearbox. After the Leyland take-over in 1961, the Standard car company’s efforts concentrated increasingly on the Triumph range, but Standard cars final fling in 1962 was once again Vanguard-based, though the Standard car company broke new ground with a 2-litre short-stroke ohv 6-cylinder engine later used in the Triumph 2000. The last Standard cars were delivered in the summer of 1963. The name died because the term, ‘standard’, when applied to cars, had been debased; it had come to mean the opposite of ‘de luxe’ – and this despite the comfortable appointments of the Luxury Six.

US, 1903 – 1907

Standard/ Standard Tourist

Standard Motor Construction, Jersey City, N.J.

Th Standard car succeeded the US Long Distance. The only model Standard car was a five-seater in wood at $3.250, or in aluminium for $3.500. The engine of this Standard car was a 4-stroke, 4-cylinder one of 25hp.

Italy, 1906 – 1912

Fabbrica Automobili Standard, Turin

Also known as the FAS, the Standard car was a conventional machine with a 14/20hp 4-cylinder engine and 4-speed gearbox. The Standard car company had no known connection with any firm bearing the name Standard.

US, 1909 – 1910

(1) St. Louis Motor Car Co, St. Louis, Mo., 1909

(2) St. Louis Car Co, St. Louis, Mo., 1910

From 1906 to 1909 this Standard car company first made three models of the Mors under the name American Mors, but in 1909 they introduced a car of their own design. This Standard car had an ohv 50hp 6-cylinder engine of 7.8-litre capacity. Five body styles were listed, including a limousine at $4.000. The rear springs were of the platform type.

US, 1910

Standard Gas Electric Power Co, Philadelphia, Pa.

This Standard car had a 4-cylinder, 3.7-litre engine with a 3-speed sliding-gear transmission and shaft drive. The only feature of interest of this Standard car was electric starting. The single model Standard car for 1910 was a four-seater torpedo which weighed 2.000lb.

D, 1911 – 1912

Standard Automobilfabrik GmbH, Berlin-Charlottenburg

This German Standard car was characterized by the use of Henriod rotary-valve engines, but the system proved unsuccessful and production of Standard cars was not on a large scale. Two 4-cylinder Standard car models of 10/28PS and 13/35PS were listed.

US, 1912 – 1915

Standard Electric Car Co, Jackson, Mich.

This electric Standard car used Westinghouse motors and was claimed to have a range of 110 miles on a charge. The Standard car was operated from a tiller on the left-hand side. The controller on the Standard car gave six forward speeds, the maximum speed being 20mph. The Standard Model M, a four-seater closed model, cost $1.885.

US, 1912 – 1923

(1) Standard Steel Car Co, Butler, Pa., 1912 – 1923

(2) Standard Auto Vehicle Co, Butler, Pa., 1923

For most of its life the Standard car was built by a firm whose main product was steel and composite railway carriages and wagons. Up to 1916 the Standard car was a conventional 38hp 6-cylinder car built in touring an closed models, at prices up to $3.600. In 1916 an 8-cylinder Standard car model was introduced which was to become the staple product of the Standard car company. Smaller than the six, this Standard car was rated at 29hp (50bhp) and cost only $1.950 for the most expensive model. For 1917 it was increased to 34hp (80bhp) and by 1921 prices of the Standard cars were up to $5.000. In 1923 a new company acquired the design from the Standard Steel Car Co. They assembled a few of the V8 Standard cars, but did not introduce any new models, and were out of business the same year.

US, 1914

Standard Engineering Co, Chicago, Ill.

This Standard car was a cyclecar powered by an air-cooled 2-cylinder Spacke engine. Transmission was by friction discs, and final drive by single chain.

US, 1920 – 1921 

Standard Engineering Co, St. Louis, Mo.

The Standard Steam Car was equipped with a Scott-Newcomb 2-cylinder, horizontal paraffin-burning steam engine and the Standard car was advertised as being able to raise a head of steam in less than 60 seconds. The Standard car carried a Rolls-Royce-type condenser and closely resembled the then well-known Roamer. A touring model was the only body style available. The Standard car was sometimes known as the Scott-Newcomb.

D, 1933 – 1935

Standard Fahrzeugfabrik GmbH, Ludwigsburg

This Standard car firm, owned by Wilhelm Gutbrod, obtained the licence for the production of a small car designed by Josef Ganz. The car appeared under the name of Standard Superior. The Standard car had a 2-cylinder, 2-stroke engine of 396cc developing 12bhp or of 494cc and 16bhp. Special features of this Standard car design were an aerodynamic body, rear engine, centre tubular chassis and independent suspension. Production was given up in 1935, but vans and estate Standard cars were built until 1939. Another car built to Ganz designs was the Swiss Rapid.

Source: Georgano, encyclopedia of motorcar; MCS, GMN, GNG, HON, KM

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com