Brasier

France, 1897 – 1930

(1) Société des Anciens Etablissements Georged Richard, Ivry-Port, 1897 – 1905

(2) Société des Automobiles Brasier, Ivry-Port, 1905 – 1926

(3) Société Chaigneau-Brasier, Ivry-Port, 1926 – 1930

The first car made by Georges Richard (not yet named Brasier) was a frail machine on Benz lines, with belt drive and three forward speeds. By 1900, Richard was offering the Vivinus from Belgium under his own name – another voiturette, but a quieter, smoother-running one with a fair turn of speed. It was powered by a 6hp 2-cylinder engine, and it too was belt-driven. However, the 7½hp Georges Richard of 1901 had shaft drive, in the approved modern fashion of Darracq and Renault. With the arrival of the designer Brasier, who had worked for Mors, Georges Richard gradually ceased to be associated with voiturettes, but gained little originality. There were four new models in 1902, all called Richard-Brasiers, rated at between 10 and 40hp but they were of Panhard type in most respects. The smaller cars still had tubular chassis and not all Richard-Brasier models had chain drive, but all types had steel frames by 1904. In that year there were two twins and three fours, only the biggest of which, the 40hp, was chain-driven. In 1904 and 1905, Brasier’s cars won the Gordon Bennett Trophy for France, bringing worldwide fame to the name.

In 1905 Georges Richard left to make the Unic at Puteaux, and Brasier continued to offer his cars, now known simply as Brasiers. The Brasier remained conservative in design until 1912, with exposed valve gear and cylinders cast in pairs. In that year, a modern light Brasier car was introduced, with a 4-cylinder engine cast en bloc. Ivry-Port went on listing solid, unenterprising, relatively expensive Four-cylinder Brasiers for sale until 1927. They were brought up to date in 1923 by means of front wheel brakes and ohv engines, but this had become common practice, Brasier, in fact, was another famous old make whose popularity slowly declined, like so many in France at this time.

Reorganization at Brasier in 1926 at first brought no important innovations, apart from a change of name to Chaigneau-Brasier, and the introduction of a modern orthodox light car in the shape of the Chaigneau-Brasier 9CV. Then, in 1928, the new company revealed the outcome of its rethinking. This had been over- instead of under-enterprising, for the new car as a 3-litre, overhead-camshaft straight-8 with front wheel drive. With this car, and even more with the bigger Chaigneau-Brasier Type DG8 of similar design that followed in 1930, Chaigneau-Brasier committed the double error of plunging into the luxury market at a time of economic depression, and offering an unconventional design to a public that distrusted such things. Chaigneau-Brasier were not the only French firm to make the same simultaneaous, and fatal, mistakes, and they paid the same price.

Source: Georgano, encyclopedia of motorcar; TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Duesenberg

US, 1920 – 1937, 1966

(1) Duesenberg Motor Co, Indianapolis, Ind., 1920 – 1937

(2) Duesenberg Corporation, Indianapolis, Ind., 1966

Fred Duesenberg began by making bicycles and designed his first Duesenberg car, the Mason, in 1904. He and his brother August made engines with horizontal overhead valves for the 1912 Mason racing cars, and founded Duesenberg Motors in the following year in order to produce marine engines and complete racing cars bearing the Duesenberg name. The most famous of the latter appeared in 1920: a 3-litre Bugatti-inspired Duesenberg straight-8 with single overhead camshaft and three (vertical) valves per cylinder. This Duesenberg won the 1921 French Grand Grand Prix. In the 1920s the Duesenberg racing cars were the great rivals of the Millers at Indianapolis, and victory was assured in 1924 by the adoption of a centrifugal blower on Duesenberg cars. Though a two-stroke 1½-litre 8-cylinder racing engine capable of 7.000rpm was made in 1926, this was not proceeded with. The horizontal-valve Duesenberg engine was taken over in 1920 by the Rochester Motor Manufacturing Co Inc and was used in various sporting and luxury cars.

Meanwhile, at the end of 1920, the first Duesenberg production car made its debut. This Duesenberg Model A was an extremely expensive, if very advanced, luxury car, embodying an 8-cylinder in-line engine – the first to be seen in an American production car – of 4.2 litres, basically similar to the Duesenberg racing unit, but with only two valves per cylinder and developing about 100bhp. There were also hydraulically-operated front wheel brakes – another ‘first’ as far as America was concerned. The Model A was current until 1926. A handful of its little-altered successor, the Duesenberg Model X, was made in 1926-1927, but in the former year E.L. Cord of Auburn acquired control of the Duesenberg company. He stipulated that Fred Duesenberg’s next car should be completely new, and a quite exceptional machine. In fact, the Duesenberg Model J, which made its bow at the end of 1928, was the most remarkable automobile in America: bigger, faster, more elaborate and more expensive than any other, yet also superior to them in refinement and good looks. Its 6.9-litre, 8-cylinder engine, made by Lycoming (a firm which Cord had also bought), had two chain-driven overhead camshafts operating four valves per cylinder; a layout of racing type unique among American cars at the time and said to develop 265bhp at 4250rpm – more than double the output of any rival. Although the complete Duesenberg car weighed more than 4980lb, it was claimed to be capable of 116mph in top gear and 89mph in second. Only Duesenberg Model J chassis were made for which $8500 was asked in 1929. Immensely long and strong and lowbuilt, Duesenberg cars were very popular with all the leading coachbuilders. The Duesenberg company preferred to sell cars complete with bodies designed by them but made by approved builders, such as Murphy, Bohman & Schwarts, Judkins, Derham and Le Baron. In this form, catalogued Duesenberg models cost up to $17.950. The transmission – apart form the double dry-plate clutch – was conventional, as was the suspension by half-elliptic springs and hydraulic shock absorbers. The brakes, of course, were hydraulic, with vacuum servo assistance from late 1929.

In 1932 a supercharged version of the Model J, the Duesenberg SJ, was added. To cope with the 320bhp now alleged to be available, bearings, reciprocating parts and valve springs were strengthened. Usually, the shortest Duesenberg J chassis was used, with the highest axle ratio and stronger front springs. A maximum speed of 129mph was attributed to the Duesenberg SJ, with an acceleration figure of 0-100mph in 17 seconds.

Duesenberg survived the Depression, but died in the collapse of the Cord Corporation in 1937. Attempts to revive the Duesenberg name were made in 1947 and in 1966. The first Duesenberg was unsuccessful, and in 1966 only one Duesenberg car was actually made, powered by a 7-litre V8 Chrysler engine with push-rod overhead valves, developing 431bhp at 5.000rpm. Transmission was automatic, front suspension was independent, and there were disc brakes. Body styling was by Ghia. This Duesenberg venture, too, collapsed.

Source: Georgano, encyclopedia of motorcar; TRN 

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com