Duesenberg

US, 1920 – 1937, 1966

(1) Duesenberg Motor Co, Indianapolis, Ind., 1920 – 1937

(2) Duesenberg Corporation, Indianapolis, Ind., 1966

Fred Duesenberg began by making bicycles and designed his first Duesenberg car, the Mason, in 1904. He and his brother August made engines with horizontal overhead valves for the 1912 Mason racing cars, and founded Duesenberg Motors in the following year in order to produce marine engines and complete racing cars bearing the Duesenberg name. The most famous of the latter appeared in 1920: a 3-litre Bugatti-inspired Duesenberg straight-8 with single overhead camshaft and three (vertical) valves per cylinder. This Duesenberg won the 1921 French Grand Grand Prix. In the 1920s the Duesenberg racing cars were the great rivals of the Millers at Indianapolis, and victory was assured in 1924 by the adoption of a centrifugal blower on Duesenberg cars. Though a two-stroke 1½-litre 8-cylinder racing engine capable of 7.000rpm was made in 1926, this was not proceeded with. The horizontal-valve Duesenberg engine was taken over in 1920 by the Rochester Motor Manufacturing Co Inc and was used in various sporting and luxury cars.

Meanwhile, at the end of 1920, the first Duesenberg production car made its debut. This Duesenberg Model A was an extremely expensive, if very advanced, luxury car, embodying an 8-cylinder in-line engine – the first to be seen in an American production car – of 4.2 litres, basically similar to the Duesenberg racing unit, but with only two valves per cylinder and developing about 100bhp. There were also hydraulically-operated front wheel brakes – another ‘first’ as far as America was concerned. The Model A was current until 1926. A handful of its little-altered successor, the Duesenberg Model X, was made in 1926-1927, but in the former year E.L. Cord of Auburn acquired control of the Duesenberg company. He stipulated that Fred Duesenberg’s next car should be completely new, and a quite exceptional machine. In fact, the Duesenberg Model J, which made its bow at the end of 1928, was the most remarkable automobile in America: bigger, faster, more elaborate and more expensive than any other, yet also superior to them in refinement and good looks. Its 6.9-litre, 8-cylinder engine, made by Lycoming (a firm which Cord had also bought), had two chain-driven overhead camshafts operating four valves per cylinder; a layout of racing type unique among American cars at the time and said to develop 265bhp at 4250rpm – more than double the output of any rival. Although the complete Duesenberg car weighed more than 4980lb, it was claimed to be capable of 116mph in top gear and 89mph in second. Only Duesenberg Model J chassis were made for which $8500 was asked in 1929. Immensely long and strong and lowbuilt, Duesenberg cars were very popular with all the leading coachbuilders. The Duesenberg company preferred to sell cars complete with bodies designed by them but made by approved builders, such as Murphy, Bohman & Schwarts, Judkins, Derham and Le Baron. In this form, catalogued Duesenberg models cost up to $17.950. The transmission – apart form the double dry-plate clutch – was conventional, as was the suspension by half-elliptic springs and hydraulic shock absorbers. The brakes, of course, were hydraulic, with vacuum servo assistance from late 1929.

In 1932 a supercharged version of the Model J, the Duesenberg SJ, was added. To cope with the 320bhp now alleged to be available, bearings, reciprocating parts and valve springs were strengthened. Usually, the shortest Duesenberg J chassis was used, with the highest axle ratio and stronger front springs. A maximum speed of 129mph was attributed to the Duesenberg SJ, with an acceleration figure of 0-100mph in 17 seconds.

Duesenberg survived the Depression, but died in the collapse of the Cord Corporation in 1937. Attempts to revive the Duesenberg name were made in 1947 and in 1966. The first Duesenberg was unsuccessful, and in 1966 only one Duesenberg car was actually made, powered by a 7-litre V8 Chrysler engine with push-rod overhead valves, developing 431bhp at 5.000rpm. Transmission was automatic, front suspension was independent, and there were disc brakes. Body styling was by Ghia. This Duesenberg venture, too, collapsed.

Source: Georgano, encyclopedia of motorcar; TRN 

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Franklin

US, 1901 – 1934

(1) H.H. Franklin Mfg Co, Syracuse, N.Y., 1901 – 1917

(2) Franklin Automobile Co, Syracuse, N.Y., 1917 – 1934

Probably the world’s most successful air-cooled car before the advent of the Volkswagen, the Franklin inspired an intense make-loyalty. H.H. Franklin had founded a factory for the manufacture of die castings in 1895, and in 1901 he was introduced to John Wilkinson’s air-cooled designs by Messsrs Brown and lipe, later well known as manufacturers of proprietary transmissions. The New York Motor Co had already made three prototypes before the first Franklin car went on sale in 1902. These Franklin featured transversely-mounted 1.7-litre 4-cylinder air-cooled engines – the valves were overhead, with mechanically operated inlet valves from 1905 – float-feed carburetors, 2-speed planetary gearboxes, central change, full-elliptic suspension and the wooden frames which were to be standard on all Franklin cars up to the end of 1927. A push-on handbrake was used until 1906. Although a Franklin version with water-jacketed engine was projected, the Franklin company remained faithful to air-cooling until they closed down. Sales rose from 13 in 1902 to 184 in 1903, when wire wheels gave way to the wood artillery type, and in 1904 a Franklin broke the San Francisco-New York record. The transverse-engined Franklin cars were catalogued until the end of 1906, but from 1905 onwards new Franklin models with conventionally-located engines made their appearance. These had auxiliary exhaust valves, shaft drive, 3-speed sliding-type gearboxes and round bonnets modelled on the Delaunay-Belleville. A 4-cylinder Franklin sold for $1800, but there was also a 6-cylinder Franklin Model H with a 7-bearing crankshaft and a 9ft 6in wheelbase for $4.000: all subsequent 6-cylinder Franklin cars had seven main bearings. A straight-8 appeared without success in the 1905 Vanderbilt Cup Eliminating Trials. Franklin’s full-elliptic suspension was continued. This gave an excellent ride and resulted in tyre mileages in the region of 20.000: this is why the Franklin company was refusing to fit detachable rims as standard equipment as late as 1922. In 1907 an automatic advance-and-retard was fitted on the Franklin and in 1908 a gear-driven fan. The 1910 Franklin cars used a suction-driven sirocco fan incorporated in the flywheel. Smallest of the 1909 range was the 18hp Franklin Model G, a 2.3-litre 4-cylinder car with quadrant change sold at $1850. Selective change was used on the bigger Franklin fours and sixes which had oversquare cylinder dimensions and cost $2800 and $3750 respectively. With the 1912 Franklin models came a Renault-type bonnet and full pressure lubrication, and a 4-cylinder was still available at $2.000, or $1.500 less than the big 38.4hp 6-cylinder.

In 1914 only a 6-cylinder car, the ‘Franklin 6/30’, was offered, and Franklin fell into line with the rest of the American industry by going over to left-hand drive, central change and full electrical equipment. A year later aluminium pistons were adopted. A stunt drive by Franklin from Walla Walla, Washington, to San Francisco in bottom gear demonstrated the car’s ability to keep cool. The 1917 models had electric chokes, while imitators arose in the industry to try and cash in on Franklin’s success with air-cooling. One of these firms, Holmes, was headed by former vice-president of the Franklin Automobile Co. By the end of World War 1 a 6-cylinder Franklin could be bought for $2.050, reduced two years later to $2.000. 8.648 Franklin cars were sold in 1920. Late in 1922, came a redesigned Franklin car with a ‘horse-collar’ bonnet allegedly modelled on the Fiat, pressure air-cooling with frontal blower, unit gearbox, single dry-plate clutch, 6-volt instead of 12-volt electrics and detachable rims. Sales rose to 11.000 and the Franklin company which had pioneered series-production closed cars as early as 1913 was offering a Franklin sedan at $2.850. During 1925 the design was face-lifted once again and the De Causse-styled Franklin Series 11 introduced. Cylinder capacity remained a modest 3.3-litres, but appearance was entirely changed with a 9ft 11in wheelbase and a vertical-barred ‘radiator’. This revolutionary step so appalled John Wilkinson that he resigned from the Franklin company forthwith. Some of the semi-custom body styles – especially the boat-taled sports coupé at $3.150 – were remarkably attractive. Subsequently some excellent and expensive custom bodywork was designed for Franklin by such firms as Derham, Willoughby, Holbrook, and (especially) Dietrich. Over 13.000 Franklin Series 11s were sold between mid-1925 and the end of 1926, among those who favoured Franklins being Colonel Charles Lindbergh. Yet even the ‘Franklin 11B’ of 1927 retained the wooden frame, full-elliptic suspension and foot transmission brake. Front-wheel brakes did not arrive until the introduction of the 1928 3.9-litre Franklin Airman, which boasted internal-expanding Lockheed hydraulics at a time when the contracting type was generally favoured in America. In 1928 long-chassis models were given steel frames, standardized in 1929, and a standard sedan sold for £885 in England. All but the cheapest Franklin cars now had silent 2nd gearboxes. This was the period in which Dietrich introduced their delightful speedster (actually a 4-door convertible sedan) and a 4½-litre 6-cylinder Franklin engine actually took to the air in a Waco biplane. Prices were generally in the $2.200 - $3.500 range, with custom Franklin models running up to $7.200.

The 1930 Franklin Series 14 introduced a new radiator and side-blast cooling, an the elegant Pirate models had concealed running-boards as well. The unconventional, however, could no longer sell in America, and only 2.851 Franklin cars were delivered in 1931. In 1932 came synchromesh, free wheels and ‘Startix’ devices, as well as a magnificent Dietrich-styled 6.8-litre supercharged V12 (Franklin Series 17) on a 12ft wheelbase. Unfortunately this was re-engineered to incorporate proprietary axles and semi-elliptic suspension, and in production form it weighed nearer three tons than the two tons of the prototype. It combined elegance, 95mph, and 150bhp for $4.400, but few were sold, though a dratic price cut to $2.885 was made for 1933. The last new Franklin was the Franklin Olympic, an inexpensive 6-cylinder using a Franklin engine wedded to a REO chassis and body. The Franklin factory closed down in 1934. The patents were, however, taken over by the Air-Cooled Motors Corporation (now Franklin Engine Co.), whose Syracuse factory has specialized in light horizontally-opposed aircraft engines: a 6-cylinder Franklin helicopter engine, converted to water-cooling, powered the Tucker of 1947. 2-, 4-, and 6-cylinder untis up to 5.7 litres’ capacity were being produced in 1972.

Source: Georgano, encyclopedia of motorcar; MCS

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com