Duesenberg

US, 1920 – 1937, 1966

(1) Duesenberg Motor Co, Indianapolis, Ind., 1920 – 1937

(2) Duesenberg Corporation, Indianapolis, Ind., 1966

Fred Duesenberg began by making bicycles and designed his first Duesenberg car, the Mason, in 1904. He and his brother August made engines with horizontal overhead valves for the 1912 Mason racing cars, and founded Duesenberg Motors in the following year in order to produce marine engines and complete racing cars bearing the Duesenberg name. The most famous of the latter appeared in 1920: a 3-litre Bugatti-inspired Duesenberg straight-8 with single overhead camshaft and three (vertical) valves per cylinder. This Duesenberg won the 1921 French Grand Grand Prix. In the 1920s the Duesenberg racing cars were the great rivals of the Millers at Indianapolis, and victory was assured in 1924 by the adoption of a centrifugal blower on Duesenberg cars. Though a two-stroke 1½-litre 8-cylinder racing engine capable of 7.000rpm was made in 1926, this was not proceeded with. The horizontal-valve Duesenberg engine was taken over in 1920 by the Rochester Motor Manufacturing Co Inc and was used in various sporting and luxury cars.

Meanwhile, at the end of 1920, the first Duesenberg production car made its debut. This Duesenberg Model A was an extremely expensive, if very advanced, luxury car, embodying an 8-cylinder in-line engine – the first to be seen in an American production car – of 4.2 litres, basically similar to the Duesenberg racing unit, but with only two valves per cylinder and developing about 100bhp. There were also hydraulically-operated front wheel brakes – another ‘first’ as far as America was concerned. The Model A was current until 1926. A handful of its little-altered successor, the Duesenberg Model X, was made in 1926-1927, but in the former year E.L. Cord of Auburn acquired control of the Duesenberg company. He stipulated that Fred Duesenberg’s next car should be completely new, and a quite exceptional machine. In fact, the Duesenberg Model J, which made its bow at the end of 1928, was the most remarkable automobile in America: bigger, faster, more elaborate and more expensive than any other, yet also superior to them in refinement and good looks. Its 6.9-litre, 8-cylinder engine, made by Lycoming (a firm which Cord had also bought), had two chain-driven overhead camshafts operating four valves per cylinder; a layout of racing type unique among American cars at the time and said to develop 265bhp at 4250rpm – more than double the output of any rival. Although the complete Duesenberg car weighed more than 4980lb, it was claimed to be capable of 116mph in top gear and 89mph in second. Only Duesenberg Model J chassis were made for which $8500 was asked in 1929. Immensely long and strong and lowbuilt, Duesenberg cars were very popular with all the leading coachbuilders. The Duesenberg company preferred to sell cars complete with bodies designed by them but made by approved builders, such as Murphy, Bohman & Schwarts, Judkins, Derham and Le Baron. In this form, catalogued Duesenberg models cost up to $17.950. The transmission – apart form the double dry-plate clutch – was conventional, as was the suspension by half-elliptic springs and hydraulic shock absorbers. The brakes, of course, were hydraulic, with vacuum servo assistance from late 1929.

In 1932 a supercharged version of the Model J, the Duesenberg SJ, was added. To cope with the 320bhp now alleged to be available, bearings, reciprocating parts and valve springs were strengthened. Usually, the shortest Duesenberg J chassis was used, with the highest axle ratio and stronger front springs. A maximum speed of 129mph was attributed to the Duesenberg SJ, with an acceleration figure of 0-100mph in 17 seconds.

Duesenberg survived the Depression, but died in the collapse of the Cord Corporation in 1937. Attempts to revive the Duesenberg name were made in 1947 and in 1966. The first Duesenberg was unsuccessful, and in 1966 only one Duesenberg car was actually made, powered by a 7-litre V8 Chrysler engine with push-rod overhead valves, developing 431bhp at 5.000rpm. Transmission was automatic, front suspension was independent, and there were disc brakes. Body styling was by Ghia. This Duesenberg venture, too, collapsed.

Source: Georgano, encyclopedia of motorcar; TRN 

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Peerless

US, 1901 – 1931

(1) Peerless Mfg Co, Cleveland, Ohio, 1900 – 1905

(2) Peerless Motor Car Co, Cleveland, Ohio, 1905 – 1931

The Peerless car was known in its heyday as ‘One of the three P’s’ (Packard, Peerless and Pierce-Arrow), the great trio of American motoring. The Peerless car first appeared in 1900, the product of a concern which had built clothes wringers and bicycles since 1869. Its début was not auspicious, the 1900 prototype Peerless car being a typical horseless carriage with bicycle wheels and a single-cylinder De Dion Bouton engine. This Peerless car was followed in 1901 by the Peerless Type C Motorette, with a 3½hp single-cylinder water-cooled engine, this Peerless car was priced at $1.300. This was augmented later in the year by the Peerless Type B, similar but smaller and cheaper. 

Louis P. Mooers came to Peerless cars as chief engineer in 1901 and it was he who shaped the policy of the Peerless car company during its first formative years. He designed the 1902 range of Peerless cars. These Peerless cars were shaft-driven and the engine was mounted vertically at the front of the car in what was to be the conventional arrangement in most cars, but was an innovation at the time. Selective sliding-gear transmission was used on Peerless cars and side-entrance tonneaus were included in the range, possibly the first cars of this type. The prototypes of the 1902 Peerless car line were equipped with a single-cylinder Mooers-designed engine, although the production Peerless cars had 2-cylinder power plants. The 1903 Peerless car series were based on 1902 Peerless racing cars (also designed by Mooers). Two Peerless cars were available, a 24 and a 35hp, both with 4-cylinder T-head engines of Mooers design. The year 1903 was notable for the appearance of the Peerless limousine, probably America’s first closed car that was not custom-built.

In 1904, Mooers designed the famous Peerless Green Dragon racing car, a behemoth with a 6x6in bore and stroke. Driven from track to track by Barney Oldfield, ‘The Boy in Green’ test driver for the Peerless car company’s racing cars, the Green Dragon brought Peerless cars an enviable reputation as Oldfield continued to break records – frequently his own. He crashed the Green Dragon Peerless car in 1905, but a new Peerless Green Dragon car was built and continued the record set by its earlier namesake.

By this time, the Peerless car company was rapidly expanding and production of Peerless cars was increased. The Peerless cars was regarded as one of the prestige cars of America and was priced accordingly. In 1907, the first 6-cylinder Peerless car was introduced although the fours continued for many years. Changes on Peerless cars were largely limited to perfection of details. In 1912, prices ranged from $4.200 to $7.200. By 1913, Peerless cars were equipped with self-starters of the Peerless car firm’s own design.

An important development in Peerless design was the introduction of a V8 Peerless car, a year after the rival Cadillac concern. This Peerless V8 appeared late in 1915 and was reasonably priced in comparison with the expensive six-cylinder Peerless cars which were discontinued at this time. With 80bhp at 2.700rpm, low speeds as well as high were possible in top gear. In appearance the V8 closely, resembled the Cadillac. The 1915 model Peerless car continued without basic change until 1922, by which time its appearance had become outmoded. For 1923, bodies of the Peerless car were lowered and rounded and the rear platform spring given up. Strangely enough, the newer design of the Peerless car also closely resembled the contemporary Cadillac. 

By 1923, business was good with some 5.000 Peerless cars being sold. A year later, a six was introduced as a companion car to the larger eight, now termed the ‘Peerless Equipoised Eight’. In 1925, for the first time, an outside engine was utilized in a six by Peerless cars. This was a Continental and was used on the Peerless 6-80 chassis. Prices of Peerless cars ranged from $1.400 for the cheapest six to more than $4.100 for the most expensive eight. Between 1926 and 1929, Peerless cars continued to market two lines of sixes and one of eights at prices from $1.895 to $3.795. But despite a wide price range, sales of Peerless cars were falling steadily, possibly because of generally uninspired and rather unattractive bodies. In 1929, the Peerless car range was redesigned, the new Peerless car models resembling the Marmon or Stutz to a considerable degree. A Continental straight-8 replaced the old V8 engine. The two sizes Peerless cars were continued and towards the end of 1929, with sales increasing, the outlook seemed brighter. Count Alexis de Sakhnoffsky was hired to design the 1930 Peerless car line. Thsese Peerless cars were the sleekest and best-looking the Peerless car company had ever produced. Three sixes and one eight were offered by Peerless cars with prices ranging from $995 to $2.195. The eight was dropped shortly after its introduction.

Then came the Depression and this finished the Peerless car. The Peerless car make had slipped from 25th to 28th place among American car manufacturers from 1928 to 1929 and to 30th place in 1930.

It was early in 1931 that the Peerless car company decided to attempt to recapture its former position by introducing a new prestige Peerless car which would compare with the Cadillac-V16 and the Marmon Sixteen. This Peerless car was the Peerless V16; only one prototype Peerless car was built and this still survives today. Built in 1931, the Peerless car was to have been produced as a 1933 or possibly even a 1932 model. This Peerless car was almost entirely built of aluminium. With a 42lb frame, an aluminium engine of 7.6-litres and 173bhp at 3.300rpm the Peerless car was one of the handsomest cars ever made in the United States then or at any other time. Its custom sedan body was built by Murphy.

Actual production of Peerless cars ended on 30th June 1931. The Peerless car plant remained idle for more than two years then, prohibition having been repealed, the Peerless Motor Car Company became the Peerless Corporation, brewers of Carling’s Ale and as such, it survives to this day.

Source: Georgano, encyclopedia of motorcar; KM

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com