Regal

France, 1903

O.C. Selbach, Paris

Regal cars was one of the names under which Lacoste et Battmann cars were sold. Originally the Regal car was a light two-seater with a 6hp De Dion engine, later Régal cars were powered by 2- and 4-cylinder engines by Aster and Mutel.

US, 1907 – 1920

Regal Motor Car Co, Detroit, Mich.

In 1907 Regal made 50 of their 20hp 4-cylinder Regal cars, but the following year the Regal car company took them all back, and gave the owners a new 1908 model Regal cars free. Apparently this generosity by the Regal car company was not repeated in following years, and they settled down to making a range of conventional 4-cylinder Regal cars. The best-known Regal car was the 3.2-litre 18/20hp ‘underslung’ model, which, like the American Underslung, had frame members which passed underneath the axles. The Underslung Regal car was made in open two-seater, and closed coupé form. Other Regal car models were the 20/30hp and 40hp which had normal chassis design. Regal cars were imported into England by Seabrook of Great Eastern Street, and from 1911 to 1915 the Regal cars sold in England were known as RMCs or Seabrook-RMCs. In 1915 a 10/15hp four of 2.1-litres with unit construction of engine and gearbox was introduced on a Regal car, together with a short-lived V8. At the 1919 Olympia Show Seabrooks showed a large RMC tourer powered by a 3.8-litre 6-cylinder engine, but shortly afterwards American production of Regal cars ceased, and Seabrooks began to make their own light cars.

CDN, 1910

This Regal car was a 30hp car made as a touring car or runabout at Walkerville, Ont. The Regal car had no connection with the better known Regal cars.

CDN, 1914 – 1917

Canadian Regal Motor Car Co, Berlin, Ont.

The Regal car was a light-weight touring car which resembled the Detroit model Regal car bearing the same name. The Regal car was available with a Lycoming 4-cylinder engine at $875 or a V8 at $1.350, it had a radiator filler concealed under the bonnet. The Regal car company was under the direction of Henry Nyberg, who had built the US Nyberg car before going to Canada. In 1917 the Regal car company moved to a new plant and started producing Dominion trucks. About 200 Canadian Regal cars were built.

Source: Georgano, encyclopedia of motorcar; GNG, GB

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Duesenberg

US, 1920 – 1937, 1966

(1) Duesenberg Motor Co, Indianapolis, Ind., 1920 – 1937

(2) Duesenberg Corporation, Indianapolis, Ind., 1966

Fred Duesenberg began by making bicycles and designed his first Duesenberg car, the Mason, in 1904. He and his brother August made engines with horizontal overhead valves for the 1912 Mason racing cars, and founded Duesenberg Motors in the following year in order to produce marine engines and complete racing cars bearing the Duesenberg name. The most famous of the latter appeared in 1920: a 3-litre Bugatti-inspired Duesenberg straight-8 with single overhead camshaft and three (vertical) valves per cylinder. This Duesenberg won the 1921 French Grand Grand Prix. In the 1920s the Duesenberg racing cars were the great rivals of the Millers at Indianapolis, and victory was assured in 1924 by the adoption of a centrifugal blower on Duesenberg cars. Though a two-stroke 1½-litre 8-cylinder racing engine capable of 7.000rpm was made in 1926, this was not proceeded with. The horizontal-valve Duesenberg engine was taken over in 1920 by the Rochester Motor Manufacturing Co Inc and was used in various sporting and luxury cars.

Meanwhile, at the end of 1920, the first Duesenberg production car made its debut. This Duesenberg Model A was an extremely expensive, if very advanced, luxury car, embodying an 8-cylinder in-line engine – the first to be seen in an American production car – of 4.2 litres, basically similar to the Duesenberg racing unit, but with only two valves per cylinder and developing about 100bhp. There were also hydraulically-operated front wheel brakes – another ‘first’ as far as America was concerned. The Model A was current until 1926. A handful of its little-altered successor, the Duesenberg Model X, was made in 1926-1927, but in the former year E.L. Cord of Auburn acquired control of the Duesenberg company. He stipulated that Fred Duesenberg’s next car should be completely new, and a quite exceptional machine. In fact, the Duesenberg Model J, which made its bow at the end of 1928, was the most remarkable automobile in America: bigger, faster, more elaborate and more expensive than any other, yet also superior to them in refinement and good looks. Its 6.9-litre, 8-cylinder engine, made by Lycoming (a firm which Cord had also bought), had two chain-driven overhead camshafts operating four valves per cylinder; a layout of racing type unique among American cars at the time and said to develop 265bhp at 4250rpm – more than double the output of any rival. Although the complete Duesenberg car weighed more than 4980lb, it was claimed to be capable of 116mph in top gear and 89mph in second. Only Duesenberg Model J chassis were made for which $8500 was asked in 1929. Immensely long and strong and lowbuilt, Duesenberg cars were very popular with all the leading coachbuilders. The Duesenberg company preferred to sell cars complete with bodies designed by them but made by approved builders, such as Murphy, Bohman & Schwarts, Judkins, Derham and Le Baron. In this form, catalogued Duesenberg models cost up to $17.950. The transmission – apart form the double dry-plate clutch – was conventional, as was the suspension by half-elliptic springs and hydraulic shock absorbers. The brakes, of course, were hydraulic, with vacuum servo assistance from late 1929.

In 1932 a supercharged version of the Model J, the Duesenberg SJ, was added. To cope with the 320bhp now alleged to be available, bearings, reciprocating parts and valve springs were strengthened. Usually, the shortest Duesenberg J chassis was used, with the highest axle ratio and stronger front springs. A maximum speed of 129mph was attributed to the Duesenberg SJ, with an acceleration figure of 0-100mph in 17 seconds.

Duesenberg survived the Depression, but died in the collapse of the Cord Corporation in 1937. Attempts to revive the Duesenberg name were made in 1947 and in 1966. The first Duesenberg was unsuccessful, and in 1966 only one Duesenberg car was actually made, powered by a 7-litre V8 Chrysler engine with push-rod overhead valves, developing 431bhp at 5.000rpm. Transmission was automatic, front suspension was independent, and there were disc brakes. Body styling was by Ghia. This Duesenberg venture, too, collapsed.

Source: Georgano, encyclopedia of motorcar; TRN 

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com