Duesenberg

US, 1920 – 1937, 1966

(1) Duesenberg Motor Co, Indianapolis, Ind., 1920 – 1937

(2) Duesenberg Corporation, Indianapolis, Ind., 1966

Fred Duesenberg began by making bicycles and designed his first Duesenberg car, the Mason, in 1904. He and his brother August made engines with horizontal overhead valves for the 1912 Mason racing cars, and founded Duesenberg Motors in the following year in order to produce marine engines and complete racing cars bearing the Duesenberg name. The most famous of the latter appeared in 1920: a 3-litre Bugatti-inspired Duesenberg straight-8 with single overhead camshaft and three (vertical) valves per cylinder. This Duesenberg won the 1921 French Grand Grand Prix. In the 1920s the Duesenberg racing cars were the great rivals of the Millers at Indianapolis, and victory was assured in 1924 by the adoption of a centrifugal blower on Duesenberg cars. Though a two-stroke 1½-litre 8-cylinder racing engine capable of 7.000rpm was made in 1926, this was not proceeded with. The horizontal-valve Duesenberg engine was taken over in 1920 by the Rochester Motor Manufacturing Co Inc and was used in various sporting and luxury cars.

Meanwhile, at the end of 1920, the first Duesenberg production car made its debut. This Duesenberg Model A was an extremely expensive, if very advanced, luxury car, embodying an 8-cylinder in-line engine – the first to be seen in an American production car – of 4.2 litres, basically similar to the Duesenberg racing unit, but with only two valves per cylinder and developing about 100bhp. There were also hydraulically-operated front wheel brakes – another ‘first’ as far as America was concerned. The Model A was current until 1926. A handful of its little-altered successor, the Duesenberg Model X, was made in 1926-1927, but in the former year E.L. Cord of Auburn acquired control of the Duesenberg company. He stipulated that Fred Duesenberg’s next car should be completely new, and a quite exceptional machine. In fact, the Duesenberg Model J, which made its bow at the end of 1928, was the most remarkable automobile in America: bigger, faster, more elaborate and more expensive than any other, yet also superior to them in refinement and good looks. Its 6.9-litre, 8-cylinder engine, made by Lycoming (a firm which Cord had also bought), had two chain-driven overhead camshafts operating four valves per cylinder; a layout of racing type unique among American cars at the time and said to develop 265bhp at 4250rpm – more than double the output of any rival. Although the complete Duesenberg car weighed more than 4980lb, it was claimed to be capable of 116mph in top gear and 89mph in second. Only Duesenberg Model J chassis were made for which $8500 was asked in 1929. Immensely long and strong and lowbuilt, Duesenberg cars were very popular with all the leading coachbuilders. The Duesenberg company preferred to sell cars complete with bodies designed by them but made by approved builders, such as Murphy, Bohman & Schwarts, Judkins, Derham and Le Baron. In this form, catalogued Duesenberg models cost up to $17.950. The transmission – apart form the double dry-plate clutch – was conventional, as was the suspension by half-elliptic springs and hydraulic shock absorbers. The brakes, of course, were hydraulic, with vacuum servo assistance from late 1929.

In 1932 a supercharged version of the Model J, the Duesenberg SJ, was added. To cope with the 320bhp now alleged to be available, bearings, reciprocating parts and valve springs were strengthened. Usually, the shortest Duesenberg J chassis was used, with the highest axle ratio and stronger front springs. A maximum speed of 129mph was attributed to the Duesenberg SJ, with an acceleration figure of 0-100mph in 17 seconds.

Duesenberg survived the Depression, but died in the collapse of the Cord Corporation in 1937. Attempts to revive the Duesenberg name were made in 1947 and in 1966. The first Duesenberg was unsuccessful, and in 1966 only one Duesenberg car was actually made, powered by a 7-litre V8 Chrysler engine with push-rod overhead valves, developing 431bhp at 5.000rpm. Transmission was automatic, front suspension was independent, and there were disc brakes. Body styling was by Ghia. This Duesenberg venture, too, collapsed.

Source: Georgano, encyclopedia of motorcar; TRN 

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Voisin

France, 1919 – 1939

SA des Aéroplanes G. Voisin, Issy-les-Moulineaux, Seine

Gabriel Voisin was first famous for his aircraft. Voisin was one of the earliest and most important pioneers, claiming to have developed a practical aeroplane before the Wright brothers; the controversy still rages. Voisin was always a spectacular character, and so were his Voisin cars. However, like his aircraft, the Voisin cars were efficient machines as well. With the post-World War 1 depression in the aircraft industry, Voisin cars entered motor manufacture by acquiring the rights in a Citroën model which was never made as such. This Voisin car was the Voisin 18CV of 1918, which Voisin car used a Knight double-sleeve engine. Sold as the Type C1 Voisin, this Voisin car had 4-cylinders and a capacity of 4-litres. The Voisin car was a fine car, and henceforth Voisin cars used only sleeve-valve engines, developed by himself to a high degree. The 4-litre Voisin car had aluminium pistons, to permit higher engine speeds, and was eventually capable of 80mph. In spite of an excellent performance, the 4-litre was an immensely strong, refined and silent motor car – all characteristics of Voisin cars in general. A sports version Voisin carwas also offered, with 90bhp. The 4-litre was made until 1926. Alongside this Voisin car, from 1921, was the smaller Voisin C4, an 8CV of 1¼-litres that was later enlarged to 10CV and 1½-litres. In its final form, the 10CV engine of the Voisin car produced 44bhp at 4.000rpm – so much for the opponents of sleeve valves, who claimed that high revolutions could not be combined with reliability – and the Voisin car was capable of 70mph. The Voisin car had Dewandre vacuum servo brakes, as had all Voisin cars from late 1925. The 10CV Voisin car, too, survived in basic form until 1928. All the same, Voisin cars had to follow fashion in one respect, and introduced three 6-cylinder Voisin cars for 1927. The best-known Voisin car was the 13CV, providing 2.3-litres, the first Knight-engined six to be sold in France. Even in normal form, this was a 66bhp, 75mph vehicle, but a sports model Voisin car was also available. From 1928, this six, known as the Voisin Charmant, had alternative final-drive ratio for fast cruising.

Apart from sleeve valves, to which a number of famous manufacturers were wedded at the time, Voisin cars had three other enthusiasms that were considerably less common. One was truly easy gear-changing, which many makers sought, but few actually incorporated in their production cars. The Sensaud de Lavaud system of infinitely variable gears was applied on Voisin cars in 1929, first to the 10CV which, in the following year, had been superseded by a Cotal electric epicyclic gearbox. To this interest was related Voisin cars fondness for multi-cylinder engines, which aimed at giving the utmost flexibility, thereby avoiding gear-changing altogether. Voisin made a V-twelve luxury car as early as 1921. The layout of this Voisin car was revived in 1930 for the Voisin Type C18 Diane. This Voisin car was a 4.8-litre car with a 115bhp engine that needed only 3 forward speeds. The Voisin Simoun and Voisin Sirocco were two low chassis models Voisin cars with striking razor edge saloon and coupé bodies which were made in very small numbers in 1930. Identical except for their engines, the Voisin Simoun used a 5.8-litre six, and the Sirocco the V12. The Voisin Diane was still listed for 1938. The other Voisin cars of the 1930s were sixes, the Voisin Charmant continuing to 1934.

Voisin cars had a reputation for putting into practice ideas which remained ideals for most manufacturers. For example, he was dedicated to weight reduction, and to this end produced notably light patent bodies whose only drawback was their extreme ugliness. Of wood and aluminium, they were entirely practical, being cheap to make, compact, and strong, as well as light. A 2-door, four-seater saloon body on the 10CV Voisin car chassis weighed only 1.060lb, keeping the weight of the whole Voisin car down to 22cwt. The most unprepossessing were the convertible Voisin cars and those with detachable hard tops. Because of their looks, the Voisin cars, with their maker’s patent bodies, never sold well – a deplorable waste of well-directed ingenuity. However, fabric Weymann-type and other normal bodies were also supplied on the Voisin car. From 1931 to 1934, some Imperia cars from Belgium were made under licence. In 1936 a most unusual Voisin car was made in the shape of the straight-12; this Voisin car had two 3-litre, 6-cylinder engines in line, the rear part of the hindmost engine projecting into the driving compartment. 180bhp and 125mph were claimed, but the Voisin car was not put in production. The last Voisin cars, introduced in 1937, used the 6-cylinder 3½-litre Graham engine, though without the supercharger. These Voisin cars were not the work of Gabriel Voisin, but were made by a syndicate that had acquired the Voisin car name. After World War 2, Voisin designed a car which was as complete a contrast to his former work as can be imagined – the Spanish-built Biscuter.

Source: Georgano, encyclopedia of motorcar; TRN    

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com