Frazer-Nash

GB, 1924 – 1960

(1) Frazer Nash Ltd, Kingston on Thames, Surrey, 1924 – 1925

(2) William G. Thomas & Frazer Nash Ltd, Kingston on Thames, Surrey, 1925 – 1926

(3) A.F.N. Ltd, Isleworth, Middlesex, 1926 – 1960

After Captain A. Frazer Nash left GN Ltd, the company he had helped to found, he at first made orthodox family Frazer Nash cars with shaft drive and water-cooled 4-cylinder engines of Deemster extraction. However, only a handful of light cars were made before Frazer Nash reverted to type. His new Frazer Nash car of 1924 was based largely on the GN, retaining its dog-clutch gear-change, separate chains for each of the three forward speeds, solid rear axle, hard quarter-elliptic suspension and high ratio steering. After the Plus-Power engine, Frazer Nash adopted the sv water-cooled 4-cylinder 1½-litre Anzani unit, giving 40bhp. Thus the GN’s combination of simplicity, strength, modest price, low weight and high powere were combined in a still brisker sporting machine. The Frazer Nash, together with the Aston-Martin, was Britain’s nearest answer to importe sports cars in the Bugatti Brescia class. It was so popular that the Frazer Nash remained in production, basically unchanged for 15 years, even though clutches and chain drive had been outmoded when the Frazer Nash was first introduced.

The principal alternations were to the power unit. A Meadows engine of the same size, but with overhead valves, and giving 50bhp, supplemented and then replaced the Anzani from 1929 and four forward speeds were provided on the Frazer Nash. Alternatively available from 1934 was the 1½-litre single ohc Frazer Nash engine, known as the Gough after its designer. This unit normally delivered 60bhp, but was also available supercharged in the Frazer Nash Shelsley or Frazer Nash TT replica chassis which had cantilever front springs. The Frazer Nash model names applied to the chassis, which could be fitted with any engine. Thus some Frazer Nash Shelsleys were equipped with the twin ohc 1.675cc 6-cylinder Blackburne, which was a smoother, more flexible unit.

It was clear that such a fundamentally primitive design could not last for ever, however efficient. H.J. Aldington, who had gained control of AFN Ltd in 1929, sought an alternative by importing the German BMW from 1934 – the BMW Type 319 engine was used in the chain-driven Frazer Nash chassis. The last Frazer Nash of the old pattern was made in 1939, but the Frazer Nash name re-appeared 8 years later attached to a thoroughly up-to-date car. Its power unit was developed jointly by AFN and Bristol, using the pre-war BMW Type 328 engine modified for higher output. In the Frazer Nash the 2-litre cross-push-rod operated ohv unit developed from 75 to 135bhp, depending on the stage of tune required. It was installed in a tubular chassis with transverse leaf independent front suspension and torsion bar rear suspension. There was a normal synchromesh gearbox and live axle. The Frazer Nash car was light – the chassis weighed 1.176lb – and held the road extremely well. The Frazer Nash High Speed Model of 1948 was developed into the Frazer Nash Le Mans Replica which gained a 3rd place in that race in 1949, as well as being the only British car to win the Targa Florio, in 1951. From 1953 a De Dion-type rear axle was used in some Frazer Nash cars, including the Frazer Nash Competition Model. When BMW began making a 2.6-litre V8 engine, this was put in the Frazer Nash Competition Model and in a new two-seater coupé, the Frazer Nash Continental. This was very expensive at £3.751. Only the BMW unit was available from 1957, increased to 3.2-litres in 1959. This was the last year at which Frazer Nash cars were seen at the Earls Court Motor Show and production of Frazer Nash ceased soon after that.

Source: Georgano, encyclopedia of motorcar; TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

DeSoto

US, 1913 – 1916

DeSoto Motro Car Co, Auburn, Ind.

The DeSoto appears to have succeeded the Zimmerman. This was a large car with a 55hp, 6-cylinder engine, which was furnished with a compressed-air starter. The DeSoto model Six-55 five-seater touring car sold for $2185.

US, 1928 – 1960

Chrysler Motors Corp, Detroit, Mich.

The DeSoto was launched in 1928 as a 3.2-litre side valve six to compete with Oldsmobile, Pontiac and the cheaper Nashes. Styling and general design of the DeSoto were in line with the 1929 Chryslers, and at $885 for a DeSoto sedan 90.000 were sold in the first twelve months. A 3.4-litre straight-8 DeSoto on a 9ft 6in wheelbase was announced for 1930 as the world’s cheapest 8-cylinder car. However, DeSoto suffered badly in the Depression, and in 1932, when flexible rubber engine mountings and free wheels were made available, sales dropped to 26.000 DeSoto cars.
The DeSoto disappeared from the British market about this time, though certain ‘Chrysler’ models listed in England (the Mortlake, Croydon, and some of the Richmonds) were in fact DeSoto cars in all but name. A 6-cylinder version of Chrysler’s advanced unitary-construction Airflow, the SE-type with a 4-litre engine, was brought out in 1934, but was an unsuccessful as its bigger sister. Later DeSotos followed regular Chrysler lines closely though in later years there was a tendency for DeSoto to move into a higher price class than Dodge; by 1952 DeSotos started $300 higher than the companion make.
By 1939 the DeSoto cars for sale were being made with independent front suspension, hypoid back axles and column change. There was a choice at DeSoto of two 6-cylinder engines and three wheelbase lengths, the longest of these being reserved for seven-seater bodywork – DeSoto continued to offer a really roomy family car right up to 1954. A 4-speed semi-automatic Vacumatic transmission became an option in 1941, but DeSoto’s big post-war change of models did not take place until 1952, when the division followed Chrysler’s lead in adopting the oversquare ohv V8; the DeSoto version was of 4½-litre capcity and developed 16-bhp. With the advent of Chrysler’s ‘flight sweep’ styling in 1955, the side-valve sixes were dropped and the standard engine in a DeSoto was now a 4.8-litre eight, giving 185bhp in Firedome guise, and 200bhp in Fireflite form. Though this redesigning saved Chrysler sales generally, the slump in the medium-price class had an adverse effect on DeSoto and in 1959 the DeSoto division was merged with Plymouth. Last of the DeSotos were the 1961 models, unitary-construction cars with a choice of three engines: Plymouth’s 145bhp ohv ‘slant six’ as used in the Valiant, and V8s of 230 and 265bhp, the two former only in Canadian DeSotos. Production of DeSoto cars ceased in November 1960 after only a few had been delivered.

Source: Georgano, encyclopedia of motorcar; MCS
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com