Star

GB, 1898 – 1932

Star/ Starling/ Stuart

(1) Star Motor Co, Wolverhampton, Staffs., 1898 – 1902

(2) Star Engineering Co, Wolverhampton, Staffs., 1902 – 1909

(3) Star Cycle Co, Wolverhampton, Staffs., 1905 – 1909

(4) Star Engineering Co Ltd, Wolverhampton, Staffs., 1909 – 1928

(5) Star Motor Co Ltd, Wolverhampton, Staffs., 1928 – 1932

Edward Lisle Sr’s Star Motor Co, an offshoot of the Star Cycle Co, produced its first Star car in 1898, and offered the Star car for sale in the following year. The Star car was a Benz-based machine, with a single-cylinder, water-cooled 3½hp engine, belt primary drive and chain final drive. It was an improvement in that water circulation on the Star car was assisted by a pump. In 1900 there followed a 2-cylinder Star car with 3 forward speeds, still on Benz lines. 1901 brougth De Dion-engined single-cylinder Star cars, and 1902 an 8hp twin of Panhard type in addition. Other, larger Star cars of Panhard ancestry joined the 8hp, up to a 20hp four Star car. By 1904, although a De Dion-powered single and Panhard-type twin were still there, the bigger machines were of Mercédès pattern, these Star cars came with honeycomb radiators, mechanically-operated inlet valves and pressed-steel frames. All veteran Star cars up to 1914 were extremely well-made, well-furnished, conventional, rather expensive cars lacking in technical originality, showing a line of development appearance in the 1907 range. The best-known Star car of the veteran period was the excellent 15hp Star car of 1909, a shaft-driven 2.8-litre four which had become the 3-litre 15.9hp by 1914. A great variety of other Star cars, basically similar models were turned out, not only by Star but also by the Star Cycle Co. The latter, run by Edward Lisle Jr, had made motor tricycles and bicycles, and produced the Starling car in 1905. It had 2 forward speeds and a De Dion single-cylinder engine, but was otherwise of Panhard type, with armoured wood frame and chain drive. One year later the Star car company supplemented it with the more modern Stuart car, which had 2-cylinders, 3-speeds and shaft drive. This name was dropped in 1908, all models being called Starlings, but these too, disappeared in 1909 when Star cars cheaper line was entrusted to the new Brion Motor Co, a more indepented concern that was still run by Edward Lisle Jr. So popular was the Star car that its makers were among the six largest in the country before 1914.

The 15.9hp Star car was continued after World War 1, together with another sv four Star car of pre-war origin, the 20hp Star car of 3.8-litres. A modern light Star car of fashionable type, the 11.9hp, arrived in 1921. This Star car used a 1.795cc sv engine with a detachable head, made in unit with a 3-speed gearbox which had central change. By 1924, the 11.9 Star car had grown up into the 2-litre 12/25hp Star car. It shared cylinder dimensions with the 18hp Star car, which was a new 3-litre six. The 12/25 Star car could be had as a very fine fast touring car with overhead valves and 54bhp, in which form the Star car was called 12/40hp. Thereafter, the Star car range reverted to its pre-war complexity. By 1927, there were three sv Star car models and two additional and more up-to-date Star cars with overhead valves. The 14/40hp Star car, new in 1926, was a solid 2-litre, ohv machine which in spite of having only 4-cylinders and 3 forward speeds, this Star car was a notably smooth and flexible car, thanks to a 5-bearing crankshaft. The ohv 20/60hp Star car, a 2½-litre six with the same bore and stroke as the 14/40 and a 7-bearing crankshaft, was the most luxurious Star car. A light six, the popular ohv 18/50hp, joined the Star car range in 1928, the year of the Star car company’s acquisition by Guy, and replaced the 14/40 Star car for 1929. By this time, the sv Star cars had gone, leaving the two sixes. As the 18hp Star Comet and the 21hp Star Planet, these Star cars were revised with handsome bodies and very full, luxurious equipment, including one-shot chassis lubrication, thermostatically-controlled radiator shutters and a built-in jacking system. Two other engines, of 14hp (2-litres) and 24hp (3.6-litres) were also obtainable in Star cars for 1932, as alternative Comet and Planet power units. These Star car were the last new Star cars, for they were too expensive to make, and the times favoured the mass-produced economy car. Production of Star cars ended in March 1932, but the unsold stock was sold by McKenzie and Denley of Birmingham, and the Star car was quoted in the Buyer’s Guide lists until 1935.

US, 1903 – 1904

(1) Star Automobile Co, Cleveland, Ohio

(2) H.S. Moore, Cleveland, Ohio

This Star car was driven by a single-cylinder, watercooled engine of 1.9-litres, mounted beneath the front seat, with false bonnet and coil radiator in front. A champion planetary transmission and double chain drive was used on this Star car. Both two- and five-seater Star cars were made, the latter with rear entrance.

US, 1908

Star Automobile Co, Chicago, Ill.

Star runabouts were offered in three models, selling for $500, $600 and $700 respectively. The smallest Star car was an open two-seater, and shaft drive was employed on all Star cars.

US, 1908

Model Automobile Co, Peru, Ind.

The short-lived Star car from Peru was offered in conventional 2- and 4-cylinder forms. The twin was chain-driven, while the big, expensive four Star car ($4.000) had shaft drive.

US, 1922 – 1928

Durant Motor Co of New Jersey, Elizabeth, N.J.; Lansing, Mich; Oakland, Calif.

William Crapo Durant’s Star Four was one of the most serious attempts to take away some of the Model T Ford’s market, for the cheapest practical car. Unlike the Ford, the Star car was an assembled machine.The Star car had a 2.2-litre, 4-cylinder engine by Continental, and was conventional in design in every way except the gearbox, which was separate; a feature common to all the vehicles in Durant’s empire, but very unusual in American mass-produced cars by the early 1920s. The touring Star car cost only $443 in 1923, which helped Star to be the seventh biggest seller in America that year. The Star car was sold outside the United States as the Rugby. In 1926, a 2.8-litre six Star car was introduced. Front wheel brakes appeared in 1927 but a year later the Star car make disappeared in the collapse of the Durant interests. By this time, 250 Star cars a day were being turned out. Only the Four was still called the Star car for the 1928 model year, as the Six was now known as the Durant Model 55.

Source: Georgano, encyclopedia of motorcar; TRN, GMN, MJWW, TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Hispano Suiza

E, 1904 – 1944

SA Hispano Suiza, Barcelona

Although the Hispano Suiza car became most famous as a French make, the origins of Hispano Suiza were Spanish, it was always made in Spain as well as in France (indeed, in greater numbers) and in the country of its birth Hispano Suiza cars outlived its French offshoot as far as serious production  was concerned. The Swiss engineer Marc Birkigt, who had designed the Barcelona-built La Cuadra car in 1900, was responsible for the design of a car made in the same city from 1901 to 1904 and called the Castro. The first Hispano Suiza car, of 1904, was in fact the 20hp Castro renamed. A range of Hispano Suiza cars, with large, beautifully-built T-head pair-cast fours with live-axle drive and the luxury of water-cooled brakes was established and by 1907 these Hispano Suiza cars had found their way into the stables of King Alfonso XIII. Two similar sixes with 6.2- and 10.4-litre engines (the Hispano Suiza 30/40 and the Hispano Suiza 60/65) joined them in the following year. All were expensive machines of conventional design, intended mainly for the carriage trade – although not the Alfonso XIII model of 1912. In 1910 an Hispano Suiza racing voiturette won the Coupe de l’Auto race in France. This Hispano Suiza car had a T-head engine with a very long stroke. The Hispano Suiza Alfonso was based on it. Various versions were made, but the best-known, a 3.6-litre car, had cylinder dimensions of 80x180mm. The range of Hispano Suiza cars of tourer type was retained. While the design of the Hispano Suiza Alfonso did not change, thanks to its extreme popularity abroad, the rest of the Hispano Suiza models by 1913, were much more modern, consisting of monobloc 4-cylinder cars, still with long strokes, but with overhead valves operated by an overhead camshaft, all neatly enclosed. V-radiators relaced the former flat pattern in 1914. Two ohc fours, a Hispano Suiza 16hp and a Hispano Suiza 30hp, were listed until 1924. They were solid, reliable machines without front-wheel brakes, seen usually as taxis. By then, they had been overshadowed completely in the international field by the radically new Hispano Suiza H6B of 1919, which was made at the Paris factory and is dealt with under Hispano Suiza France. The next Hispano Suiza car model to originate in Spain, and the first six since before 1914, was a cheaper version of the Hispano Suiza H6B intended for the less opulent Spanish market, consisting of a basically similar but smaller engine of 3.7-litres, with an detachable cylinder head, installed in an H6B chassis. This power unit needed the assistance of a lower set of gear rations than those of the H6B, as it was expected to pull the same weight. This Hispano Suiza car was replaced by another ‘utility’ Hispano Suiza car in 1930, a 3-litre model with pushrod-operated overhead valves like the contemporary small Hispano Suiza car model in France. It had an interesting history; the design of this Hispano Suiza car was to have been taken up by Hudson in America, but because of the Depression American motorists were denied a Birkigt car. By 1935 the Hispano Suiza car had been enlarged to 3.404cc and there were three other sixes in the range: the 3.750cc Hispano Suiza Type 49, the 4.580cc Hispano Suiza Type 65, and the 8-litre Type Hispano Suiza 56bis, which had the same engine dimensions as the French-built car, Hispano Suiza H6C. The smaller sixes were made until 1944. In all, some 6.000 Hispano Suiza cars were produced by the Barcelona works, against about 2.600 from the Paris factory. One or two prototype Hispano Suiza cars of the French V12 were built at Barcelona but there was no series production.

France, 1911 – 1938

(1) Sté Francaise Hispano Suiza, Levallois-Perret, Seine, 1911 – 1914

(2) Sté Francaise Hispano Suiza, Bois-Colombes, Seine, 1914 – 1938

In 1911, a French company with a Paris factory was founded to assemble the Hispano Suiza car from Spain, a hitherto obscure make that had recently won sporting renown in France and was already an established manufacturer of luxury vehicles in its home country, enjoying royal patronage. The Spanish market was poor compared with the rich potential of France and other motoring countries and so it was that when a superb new model of Hispano Suiza cars of the most modern and advanced design was introduced, it came from the French factory. This was the Hispano Suiza H6B of 1919, the first French-developed Hispano Suiza car. It gained such immediate and lasting fame that henceforth, Hispano Suiza car was regarded as a primarily French make, and the products of the Spanish Hispano Suiza car factory (though made in great numbers) fell into onscurity. The Hispano Suiza H6B was designed as the last word in advanced transport for the rich. The engine of this Hispano Suiza car was the outcome of the company’s experience of aircraft engine manufacture during World War 1 – a field in which it was already famous. Its six cylinders, totalling 6.6-litres, were of aluminium, with light steel liners. The cylinder head was fixed on the Hispano Suiza car. A single overhead camshaft operated two valves per cylinder. This engine gave 135bhp at 3.000rpm. A 7-bearing, pressure-fed crankshaft coped with the power. Thus a good power-to-weight ratio was combined with reliability on Hispano Suiza cars, according to the best aviation practice. The chassis was light, yet rigid, and extremely efficient servo-assisted four-wheel brakes were provided to check the 85mph which was available on Hispano Suiza cars in top gear. In spite of a high final drive ratio of 3.4 to 1, the engine developed such excellent low-speed torque that 6 to 50mph in an Hispano Suiza car in top gear occupied only 21 seconds.

The new Hispano Suiza car was not quiet compared with the cars of competitors who counted silence above mechanical efficiency, but in its combination of most of the desirable qualities of a true luxury car – comfort, flexibility – and of the sporting machine – first rate reliability, performance, brakes and handling – the Hispano Suiza car was unique in 1919. Not surprisingly, what amounted to a single-model policy was pursued for many years. Alongside the Hispano Suiza H6B, the Hispano Suiza H6C Sport or Boulogne model appeared in 1924. Bore and stroke were 110x140mm against the H6B’s 100x140mm, giving eight litres. This fabulous Hispano Suiza car was capable of up to 110mph and could be had in short-chassis form. Modified Hispano Suiza H6B’s had won the Coupe Boillot at Boulogne in 1921, 1922 and 1923, in the last instance with the 8-litre engine, which accounted for the new Hispano Suiza car’s name. The H6B and H6C were both still available in 1929, and, as the Hispano Suiza car Tipo 56bis, the latter was made in Spain well into the 1930s. From 1924 to 1927, the former was made by Skoda of Czechoslovakia, under licence. In 1930 Hispano Suiza took over Ballot and fitted a smaller, 4.6-litre, 6-cylinder engine into a Ballot chassis. This Hispano Suiza Junior model, which had central gearchange, was not a car in the same class as its predecessors. In spite of the coming of the Depression, however, in 1931 Hispano Suiza cars produced their biggest, most complex and most expensive design. This Hispano Suiza car was the V12 which abandoned, for the first time since 1919, the six-in-line, overhead-camshaft layout. Cylinder dimensions were ‘square’, at 100x100mm, providing 9½-litres and even greater low-speed torque than that of the old H6B. The overhead valves were operated by push-rods and rockers. Top gear ratio was now 2,75:1 and bottom 5,4:1, or about the same ratio as the top gear of many family saloons of the period. All Hispano Suiza V12s could exceed 100mph and in its fastest, short-chassis open form, the Hispano Suiza car was said to attain 115mph. The V12 was made until 1938. Meanwhile, the Hispano Suiza Junior had been superseded in 1935 by the 4.9-litre, 6-cylinder Hispano Suiza K6, which used push-rod overhead valves like its big brother Hispano Suiza car. It too was current until 1938. Hispano Suiza of Paris then abandoned car production, never to resume it. A prototype Hispano Suiza car was built after World War 2, with front-wheel drive and a Ford V8 engine, but it never achieved catalogue status.

Source: Georgano, encyclopedia of motorcar; TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com