Chalmers / Chalmers-Detroit

US, 1908 – 1924

Chalmers Motor Car Co, Detroit, Mich.

The Chalmers was one of the most popular automobiles made in the United States for more than a decade. The Chalmers was the successor to the Thomas-Detroit which was built by a company which had been founded in 1906 by E.R. Thomas (builder of the Thomas car in Buffalo, N.Y.), Roy D. Chapin and Howard Earle Coffin; the two latter had previously served at Oldsmobile. The Thomas-Detroit of which some 500 were sold during the first year of production, was marketed through the parent firm in Buffalo which manufactured a larger line of cars under the Thomas emblem. The Thomas-Detroit was a medium priced four-cylinder car which had been designed by Coffin. In 1907, Hugh Chalmers, vice president of the National Cash Register Co and a noted salesman, entered the firm. Shortly after, he bought a half of E.R. Thomas’ stock and became president of the company which became the Chalmers-Detroit Motor Company. The Thomas-Detroit became the Chalmers-Detroit in 1908 and in 1910, the Chalmers. Open and closed Chalmers models in two lines comprised the Chalmers four-cylinder cars, with self-starters appearing in 1912. Chalmers (as Chalmers-Detroit) had distinguished itself in road races as early as 1908 when W.R. Burns won the Motor Parkway Sweekstakes at Jericho, N.Y., averaging 48.7mph in the six-lap 140.76 mile run.

In 1913, the Chalmers brought out its first 6-cylinder model, as well as the four and apart from small mechanical and design changes, continued both until 1914. The Chalmers four was dropped from the 1915 line, however, and sixes were to be used exclusively in Chalmers until the ending of manufacture. By 1915, some 20.000 Chalmers cars per year were coming off the Chalmers production line and would even exceed that figure before the advent of World War 1. In 1917, an L-head motor replaced the earlier overhead-valve type and on August 4th, Chalmers again headed racing news when Joe Dawson won the 24-hour stock Car Endurance Run at Sheepshead Bay, N.Y. Sales flagged following the end of the war and Hugh Chalmers, always the salesman, and with the realization that a competitor, Maxwell, wasn’t faring well either, arranged to lease his Chalmers plants to Maxwell, using his salesmanship to promote the two concerns and getting the benefit of Maxwell tooling and manufacturing equipment. By the early 1920s, however, many makes of cars were in financial difficulties due to over-expansion and recession, and Walter P. Chrysler was called in to try and reorganize Maxwell. Chrysler was at this time planning his own corporation and in 1922 Chalmers was taken over by Maxwell which had become a Chrysler subsidiary. The last Chalmer cars for sale were equipped with Lockheed hydraulic brakes but 1923 was the last year of Chalmers production with some 9000 units leaving the factories. The Maxwell survived until 1925 when it became the Chrysler Four.

Source: Georgano, encyclopedia of motorcar; KM
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Horch

D, 1900 – 1939

(1) A. Horch & Co, Cologne-Ehrenfeld, 1900 – 1902

(2) A. Horch & Co, Reichenbach/ Vogtland, 1902 – 1904

(3) A. Horch & Co, Motorwagenwerke AG, Zwickau, 1904 – 1939

August Horch was among the pioneers of car manufacture in Germany. He was employed as a an engineer with Benz from 1896 to 1899 when he started his own Horch car factory at Cologne. The first Horch car appeared in 1900. This Horch car had a 2-cylinder 5hp front-mounted engine and shaft drive. The next Horch models were a 2-cylinder 10/12hp and a 4-cylinder 16/20hp. After the Zwickau works had been set up in 1904 Horch was able to increase production. The Horch 18/22hp ohv 4-cylinder model of 1904 became very popular and was the basis for several subsequent Horch cars. A victory in the Herkomer Trial of 1906 was gained with this Horch car model, the first such success for a Horch. Horch also pioneered with his Horch Torpedo form aero-dynamic bodies for the Prince Henry Trials, which were built by Kathe of Halle. In 1906 a 6-cylinder 8-litre power unit was designed for Horch cars, developing 60bhp, but it was not a success and this was one cause of differences between Horch and his partners. Horch himself left the firm and started the Audi factory.

Various models with different engine sizes were included in the Horch car range, from the small Horch 6/18PS 1.588cc to the Horch 25/60PS 6.395cc. All Horch cars had 4-cylinder engines. After World War 1 the Horch 33/80PS 8.440cc model appeared, which had actually been designed in 1914. This Horch car started a series of prestige cars for which the make became famous in the following years. Paul Daimler (son of Gottlieb) was engaged as chief engineer in 1923. Ohc 4- and 6-cylinder Horch car models with fwb appeared in 1923/ 1924, but the first new Horch car under his management was the Horch 300 with a straight-8 3.230cc engine with twin overhead camshafts. In 1927 the ‘Horch 305’ and ‘Horch 306’ appeared, which also featured straight-8 engines, with twin overhead camshafts and a capacity of 3.375cc developing 75bhp. These Horch car models differed only in wheelbase. They were followed by the ‘Horch 375’ in 1928 with an 8-cylinder 3.974cc engine capable of 80bhp. After Daimler left Horch two more models (the Horch ‘400’ and ‘405’) were produced showing Daimler influence. The Horch 450 of 1930 was entirely new. This Horch car was straight-8 with only one overhead camshaft. Two different wheelbases and engines of 4, 4½ and 5 litres were available. The last of these stayed in the Horch car range until 1939, later Horch cars having 10-bearing crankshafts and all round independent suspension. Type numbers of Horch cars became a little confusing in the next few years, when some models were available with different wheelbases and engine capacities. A V12 with 5.990cc (Horch car models ‘600’ and ‘670’) appeared in 1931, followed by the V8 3.517cc ‘Horch 830B’ in 1933, available in two wheelbase and engine sizes. By 1939 the range consisted of the ‘Horch 930V’ and ‘Horch 830BL’(3.823cc, 92bhp) and the ‘Horch 951A’, ‘Horch 853A’ and ‘Horch 855’ (4.944cc, 120bhp). These Horch car models were available with different wheelbases and a variety of body styles from a two-seater roadster to a large Pullman saloon. The Horch car company was celebrated for luxurious ‘prestige’cars which were sold at lower prices than other top makes; a V8 cost £615 in England, and straight-8s from £985.

From 1932 Horch was a member of the Auto Union, and the racing cars bearing this name were built in the Horch car works. In 1945 the Horch car factory was nationalized and in 1956 it brought out a new Horch car. This had to be sold as the Sachsenring, as Auto Union, now based on Düsseldorf, hold the sole rights to the brand-names Horch, Audi and Wanderer.

Source: Georgano, encyclopedia of motorcar; HON

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com