Horch

D, 1900 – 1939

(1) A. Horch & Co, Cologne-Ehrenfeld, 1900 – 1902

(2) A. Horch & Co, Reichenbach/ Vogtland, 1902 – 1904

(3) A. Horch & Co, Motorwagenwerke AG, Zwickau, 1904 – 1939

August Horch was among the pioneers of car manufacture in Germany. He was employed as a an engineer with Benz from 1896 to 1899 when he started his own Horch car factory at Cologne. The first Horch car appeared in 1900. This Horch car had a 2-cylinder 5hp front-mounted engine and shaft drive. The next Horch models were a 2-cylinder 10/12hp and a 4-cylinder 16/20hp. After the Zwickau works had been set up in 1904 Horch was able to increase production. The Horch 18/22hp ohv 4-cylinder model of 1904 became very popular and was the basis for several subsequent Horch cars. A victory in the Herkomer Trial of 1906 was gained with this Horch car model, the first such success for a Horch. Horch also pioneered with his Horch Torpedo form aero-dynamic bodies for the Prince Henry Trials, which were built by Kathe of Halle. In 1906 a 6-cylinder 8-litre power unit was designed for Horch cars, developing 60bhp, but it was not a success and this was one cause of differences between Horch and his partners. Horch himself left the firm and started the Audi factory.

Various models with different engine sizes were included in the Horch car range, from the small Horch 6/18PS 1.588cc to the Horch 25/60PS 6.395cc. All Horch cars had 4-cylinder engines. After World War 1 the Horch 33/80PS 8.440cc model appeared, which had actually been designed in 1914. This Horch car started a series of prestige cars for which the make became famous in the following years. Paul Daimler (son of Gottlieb) was engaged as chief engineer in 1923. Ohc 4- and 6-cylinder Horch car models with fwb appeared in 1923/ 1924, but the first new Horch car under his management was the Horch 300 with a straight-8 3.230cc engine with twin overhead camshafts. In 1927 the ‘Horch 305’ and ‘Horch 306’ appeared, which also featured straight-8 engines, with twin overhead camshafts and a capacity of 3.375cc developing 75bhp. These Horch car models differed only in wheelbase. They were followed by the ‘Horch 375’ in 1928 with an 8-cylinder 3.974cc engine capable of 80bhp. After Daimler left Horch two more models (the Horch ‘400’ and ‘405’) were produced showing Daimler influence. The Horch 450 of 1930 was entirely new. This Horch car was straight-8 with only one overhead camshaft. Two different wheelbases and engines of 4, 4½ and 5 litres were available. The last of these stayed in the Horch car range until 1939, later Horch cars having 10-bearing crankshafts and all round independent suspension. Type numbers of Horch cars became a little confusing in the next few years, when some models were available with different wheelbases and engine capacities. A V12 with 5.990cc (Horch car models ‘600’ and ‘670’) appeared in 1931, followed by the V8 3.517cc ‘Horch 830B’ in 1933, available in two wheelbase and engine sizes. By 1939 the range consisted of the ‘Horch 930V’ and ‘Horch 830BL’(3.823cc, 92bhp) and the ‘Horch 951A’, ‘Horch 853A’ and ‘Horch 855’ (4.944cc, 120bhp). These Horch car models were available with different wheelbases and a variety of body styles from a two-seater roadster to a large Pullman saloon. The Horch car company was celebrated for luxurious ‘prestige’cars which were sold at lower prices than other top makes; a V8 cost £615 in England, and straight-8s from £985.

From 1932 Horch was a member of the Auto Union, and the racing cars bearing this name were built in the Horch car works. In 1945 the Horch car factory was nationalized and in 1956 it brought out a new Horch car. This had to be sold as the Sachsenring, as Auto Union, now based on Düsseldorf, hold the sole rights to the brand-names Horch, Audi and Wanderer.

Source: Georgano, encyclopedia of motorcar; HON

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Léon Bollee

France, 1895 – 1933

(1) Automobiles Léon Bollée, Le Mans, 1895 – 1924

(2) Morris Motors Ltd, Usines Léon Bollée, Le Mans, 1925 – 1931

(3) Sté Nouvelle Léon Bollée, Le Mans, 1931 – 1933

Leon Bollee was a son of Amédée Bolllée père, the most important pioneer of steam road vehicles in France. Leon Bollee, however, turned to really small petrol Leon Bollee cars. He was the first to do so, and therefore had to invent a new name for his Leon Bollee car of 1895 – he called it a Leon Bollee voiturette. This Leon Bollee car was a tandem two-seater 3-wheeler that was faster than any other petrol-engined vehicle on the road when the Leon Bollee car was working, thanks to a powerful 3hp engine and light weight, but the power unit was unreliable on the Leon Bollee car. The Leon Bollee car had a single air-cooled cylinder of 650cc and used hot-tube ignition. There were 3 forward speeds on the Leon Bollee car, with belt final drive. The frame was tubular. Four years after the Leon Bollee voiturette appeared, Leon Bollee superseded it with a 4-wheeler with independent front suspension by double transverse leaf springs. This Leon Bollee car had a single-cylinder, water-cooled engine. Unlike the Leon Bollee voiturette, this Leon Bollee car made no mark. The design rights were sold to Darracq, and around 1901 the name of Leon Bollee cars vanished. Meanwhile, the term voiturette had been taken up by the trade and public in general as the name for a small light car.

The Leon Bollee car reappeared in 1903 as an entirely normal, full-sized car in the more expensive class, backed by Vanderbilt money and designed for the American market. This Leon Bollee car was made in 28hp (4.6-litres) and 45hp (8-litres) versions, with four cylinders and chain drive, and led on to a 11.9-litre six Leon Bollee car in 1907, in which year the first shaft driven Leon Bollee car appeared. From 1909 there was also a small modern four, the Leon Bollee 10/14hp. The 1910 range embraced 9 Leon Bollee cars, including 2 of over 10-litres capacity. Electric lighting became available on Leon Bollee cars in 1913, but the Leon Bollee grew increasingly old-fashioned after World War 1 despite the introduction of ohv in 1922 on Leon Bollee cars and front wheel brakes in 1923. Late in 1924 Sir William Morris bought the Le Mans Leon Bollee car factory. From making a wide range of conservative French Leon Bollee fours, it turned to thinly-disguised products of Cowley, Oxford, the idea being to breach the French tariff walls from the inside. The first Morris- Leon Bollee had a 12CV 2½-litre 4-cylinder unit-construction engine made by Hotchkiss, the engine manufacturers controlled by Morris, but it had push-rod overhead valves and bore little evidence of its parentage. Not so the 18CV Morris- Leon Bollee car of 1928. This was a 3-litre straight-8 with single overhead camshaft that reflected Morris’ takeover of Wolseley two years earlier. Morris’ own new six of 1928 was mirrored in the 15CV 2.6-litre Le Mans product of 1929. The bodies for the Morris- Leon Bollee car were all made in France and were usually considerably more dashing and attractive than their British counterparts. Chassis of this Morris- Leon Bollee car were made in France, and all cars had a 4-speed gearbox. At one time, 50 12CV Morris- Leon Bollee cars were being turned out each week. However, Morris’ enterprise was not a success, and he discontinued it in the hard times of the Depression. A new syndicate was formed in September 1931 to sell the same range of cars under the name of Leon Bollee cars. This lasted for less than two years and few Leon Bollee cars were made.

Source: Georgano, encyclopedia of motorcar; TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com