The global magazine and marketplace for classic car enthusiasts, by enthusiasts.
The global magazine and marketplace for classic car enthusiasts, by enthusiasts.





Edward Lisle Sr’s Star Motor Co, an offshoot of the Star Cycle Co, produced its first Star car in 1898, and offered the Star car for sale in the following year. The Star car was a Benz-based machine, with a single-cylinder, water-cooled 3½hp engine, belt primary drive and chain final drive. It was an improvement in that water circulation on the Star car was assisted by a pump. In 1900 there followed a 2-cylinder Star car with 3 forward speeds, still on Benz lines. 1901 brougth De Dion-engined single-cylinder Star cars, and 1902 an 8hp twin of Panhard type in addition. Other, larger Star cars of Panhard ancestry joined the 8hp, up to a 20hp four Star car. By 1904, although a De Dion-powered single and Panhard-type twin were still there, the bigger machines were of Mercédès pattern, these Star cars came with honeycomb radiators, mechanically-operated inlet valves and pressed-steel frames. All veteran Star cars up to 1914 were extremely well-made, well-furnished, conventional, rather expensive cars lacking in technical originality, showing a line of development appearance in the 1907 range. The best-known Star car of the veteran period was the excellent 15hp Star car of 1909, a shaft-driven 2.8-litre four which had become the 3-litre 15.9hp by 1914. A great variety of other Star cars, basically similar models were turned out, not only by Star but also by the Star Cycle Co. The latter, run by Edward Lisle Jr, had made motor tricycles and bicycles, and produced the Starling car in 1905. It had 2 forward speeds and a De Dion single-cylinder engine, but was otherwise of Panhard type, with armoured wood frame and chain drive. One year later the Star car company supplemented it with the more modern Stuart car, which had 2-cylinders, 3-speeds and shaft drive. This name was dropped in 1908, all models being called Starlings, but these too, disappeared in 1909 when Star cars cheaper line was entrusted to the new Brion Motor Co, a more indepented concern that was still run by Edward Lisle Jr. So popular was the Star car that its makers were among the six largest in the country before 1914.
The 15.9hp Star car was continued after World War 1, together with another sv four Star car of pre-war origin, the 20hp Star car of 3.8-litres. A modern light Star car of fashionable type, the 11.9hp, arrived in 1921. This Star car used a 1.795cc sv engine with a detachable head, made in unit with a 3-speed gearbox which had central change. By 1924, the 11.9 Star car had grown up into the 2-litre 12/25hp Star car. It shared cylinder dimensions with the 18hp Star car, which was a new 3-litre six. The 12/25 Star car could be had as a very fine fast touring car with overhead valves and 54bhp, in which form the Star car was called 12/40hp. Thereafter, the Star car range reverted to its pre-war complexity. By 1927, there were three sv Star car models and two additional and more up-to-date Star cars with overhead valves. The 14/40hp Star car, new in 1926, was a solid 2-litre, ohv machine which in spite of having only 4-cylinders and 3 forward speeds, this Star car was a notably smooth and flexible car, thanks to a 5-bearing crankshaft. The ohv 20/60hp Star car, a 2½-litre six with the same bore and stroke as the 14/40 and a 7-bearing crankshaft, was the most luxurious Star car. A light six, the popular ohv 18/50hp, joined the Star car range in 1928, the year of the Star car company’s acquisition by Guy, and replaced the 14/40 Star car for 1929. By this time, the sv Star cars had gone, leaving the two sixes. As the 18hp Star Comet and the 21hp Star Planet, these Star cars were revised with handsome bodies and very full, luxurious equipment, including one-shot chassis lubrication, thermostatically-controlled radiator shutters and a built-in jacking system. Two other engines, of 14hp (2-litres) and 24hp (3.6-litres) were also obtainable in Star cars for 1932, as alternative Comet and Planet power units. These Star car were the last new Star cars, for they were too expensive to make, and the times favoured the mass-produced economy car. Production of Star cars ended in March 1932, but the unsold stock was sold by McKenzie and Denley of Birmingham, and the Star car was quoted in the Buyer’s Guide lists until 1935.
This Star car was driven by a single-cylinder, watercooled engine of 1.9-litres, mounted beneath the front seat, with false bonnet and coil radiator in front. A champion planetary transmission and double chain drive was used on this Star car. Both two- and five-seater Star cars were made, the latter with rear entrance.
Star runabouts were offered in three models, selling for $500, $600 and $700 respectively. The smallest Star car was an open two-seater, and shaft drive was employed on all Star cars.
The short-lived Star car from Peru was offered in conventional 2- and 4-cylinder forms. The twin was chain-driven, while the big, expensive four Star car ($4.000) had shaft drive.
William Crapo Durant’s Star Four was one of the most serious attempts to take away some of the Model T Ford’s market, for the cheapest practical car. Unlike the Ford, the Star car was an assembled machine.The Star car had a 2.2-litre, 4-cylinder engine by Continental, and was conventional in design in every way except the gearbox, which was separate; a feature common to all the vehicles in Durant’s empire, but very unusual in American mass-produced cars by the early 1920s. The touring Star car cost only $443 in 1923, which helped Star to be the seventh biggest seller in America that year. The Star car was sold outside the United States as the Rugby. In 1926, a 2.8-litre six Star car was introduced. Front wheel brakes appeared in 1927 but a year later the Star car make disappeared in the collapse of the Durant interests. By this time, 250 Star cars a day were being turned out. Only the Four was still called the Star car for the 1928 model year, as the Six was now known as the Durant Model 55.
Source: Georgano, encyclopedia of motorcar; TRN, GMN, MJWW, TRN
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com
August Horch was among the pioneers of car manufacture in Germany. He was employed as a an engineer with Benz from 1896 to 1899 when he started his own Horch car factory at Cologne. The first Horch car appeared in 1900. This Horch car had a 2-cylinder 5hp front-mounted engine and shaft drive. The next Horch models were a 2-cylinder 10/12hp and a 4-cylinder 16/20hp. After the Zwickau works had been set up in 1904 Horch was able to increase production. The Horch 18/22hp ohv 4-cylinder model of 1904 became very popular and was the basis for several subsequent Horch cars. A victory in the Herkomer Trial of 1906 was gained with this Horch car model, the first such success for a Horch. Horch also pioneered with his Horch Torpedo form aero-dynamic bodies for the Prince Henry Trials, which were built by Kathe of Halle. In 1906 a 6-cylinder 8-litre power unit was designed for Horch cars, developing 60bhp, but it was not a success and this was one cause of differences between Horch and his partners. Horch himself left the firm and started the Audi factory.
Various models with different engine sizes were included in the Horch car range, from the small Horch 6/18PS 1.588cc to the Horch 25/60PS 6.395cc. All Horch cars had 4-cylinder engines. After World War 1 the Horch 33/80PS 8.440cc model appeared, which had actually been designed in 1914. This Horch car started a series of prestige cars for which the make became famous in the following years. Paul Daimler (son of Gottlieb) was engaged as chief engineer in 1923. Ohc 4- and 6-cylinder Horch car models with fwb appeared in 1923/ 1924, but the first new Horch car under his management was the Horch 300 with a straight-8 3.230cc engine with twin overhead camshafts. In 1927 the ‘Horch 305’ and ‘Horch 306’ appeared, which also featured straight-8 engines, with twin overhead camshafts and a capacity of 3.375cc developing 75bhp. These Horch car models differed only in wheelbase. They were followed by the ‘Horch 375’ in 1928 with an 8-cylinder 3.974cc engine capable of 80bhp. After Daimler left Horch two more models (the Horch ‘400’ and ‘405’) were produced showing Daimler influence. The Horch 450 of 1930 was entirely new. This Horch car was straight-8 with only one overhead camshaft. Two different wheelbases and engines of 4, 4½ and 5 litres were available. The last of these stayed in the Horch car range until 1939, later Horch cars having 10-bearing crankshafts and all round independent suspension. Type numbers of Horch cars became a little confusing in the next few years, when some models were available with different wheelbases and engine capacities. A V12 with 5.990cc (Horch car models ‘600’ and ‘670’) appeared in 1931, followed by the V8 3.517cc ‘Horch 830B’ in 1933, available in two wheelbase and engine sizes. By 1939 the range consisted of the ‘Horch 930V’ and ‘Horch 830BL’(3.823cc, 92bhp) and the ‘Horch 951A’, ‘Horch 853A’ and ‘Horch 855’ (4.944cc, 120bhp). These Horch car models were available with different wheelbases and a variety of body styles from a two-seater roadster to a large Pullman saloon. The Horch car company was celebrated for luxurious ‘prestige’cars which were sold at lower prices than other top makes; a V8 cost £615 in England, and straight-8s from £985.
From 1932 Horch was a member of the Auto Union, and the racing cars bearing this name were built in the Horch car works. In 1945 the Horch car factory was nationalized and in 1956 it brought out a new Horch car. This had to be sold as the Sachsenring, as Auto Union, now based on Düsseldorf, hold the sole rights to the brand-names Horch, Audi and Wanderer.
Source: Georgano, encyclopedia of motorcar; HON
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com


