Humber

GB, 1898 to date

(1) Humber Ltd, Beeston, Notts., 1898 – 1908

(2) Humber Ltd, Coventry, 1898 – 1946

(3) Humber Ltd, Ryton-on-Dunsmore, Warwickshire, 1946 – 1970

(4) Chrysler United Kingdom Ltd, Ryton-on-Dunsmore, Warwickshire, 1970 to date

Thomas Humber’s bicycle firm, established in 1868, became a part of H.J. Lawson’s intended automobile empire empire and as such was responsible for production of the abortive Pennington tricars. Humber car manufacture started with an experimental front wheel drive design, while motor tricycles and quadricycles were also produced. These led to a line of 3-wheeled forecars which persisted up to 1905. Little came of Humber cars M.D. voiturette with 2-speed gear, but their more conventional 1901 offering had a 4½hp De Dion engine, De Dion-type transmission and shaft drive, as well a a single-spoke steering wheelwhich remained one of the Humber car company’s trademarks in the early years and anticipated Citroën practice by more than half a century. A 12hp 2½-litre 4-cylinder Humber car followed in 1902, but in 1903 two more ambitious vehicles appeared, a big Humber 20hp four and a 3-cylinder version with mechanically-operated inlet valves, as well a Britain’s first successful effort at a popular light car. This Humber car was the 5hp Humberette with a De Dion-type engine of 613cc and a 2-speed gearbox with two steering-column levers. All these Humber cars had shaft drive – Humbers eschewed the chain. In 1904 the Humberette was made in a more powerful form and up to 1908 two separate lines of Humber car were produced in the factories at Beeston and Coventry, the Beeston cars being the more expensive. 1905 saw a miniature Humber car, a four rated at 8/10hp, but with a capacity of 2 litres, which was developed the following year into a 10/12hp Coventry-Humber car selling at £315; Beeston’s offering that season was a 3½-litre T-head four selling for £472 10s. The 1907 versions of the Beeston-Humber car had a capacity of 6.3-litres and pressure lubrication.

The 1908 Humber car range was quite extensive, ranging from a bid for the lightcar market with a 1½-litre 8hp vertical twin, pressure-lubricated and with Humber’s own design of detachable wheels, at £195, up to a big 5½-litre six Humber car, also Coventry-made, at a modest £450.

Financial difficulties led to the closure of the Beeston factory in 1908, but Coventry went on making the T-headed Humber cars, all of which had 4-speed gearboxes by 1911. In 1912 new L-head models came out, the 11hp having a 1.7-litre monobloc engine, three forward speeds and splash lubcrication; there was also a new Humber car, a cyclecar named the Humberette, with a 998cc air-cooled engine but otherwise on full-scale car lines, which was made up to the outbreak of World War 1. 1913/1914 models cost £120, with £15 extra if watercooling was specified. Though Humber cars had supported the first Tourist Trophies, an unusual departure for 1914 was the preparation of a Humber car team of 3.3-litre twin ohc 4-cylinder machines inspired by the Henry-designed Peugeots for that year’s event.

After the war the Humber car company concentrated on solid family cars, noted for their excellent workmanship and all-weather equipment, as well as their conservatism. Side-valve engines were used up to 1922 in Humber cars, but inlet over exhaust layouts appeared in 1923, in which year there was also a new small Humber car model, the ‘Humber 8/18’ with 12-volt coil ignition at £275. Front wheel brakes had arrived by 1925, although Humber cars adhered to the foot-operated transmission brake for several more seasons. The company sold over 4.000 Humber cars in 1927, thanks to the 1.056cc ‘Humber 9/20’, an excellent 2-litre 4-cylinder ‘Humber 14/40’ and a new 20/55hp Humber car, the first six in a Humber car for many years.

The Humber cars were restyled in 1929, and the following year the effect of the Rootes takeover was seen in the new line of sixes, the 2.1-litre ‘Humber 16/50’ and the 3½-litre Humber Snipe and its long-chassis stablemate, the Humber Pullman. 1930 was also the last year for the 9hp Humber cars and thereafter the Humber car company’s staple products were upper-middle-class family cars of over two litres’ capacity, although a 1.7-litre ‘Humber 12’ appeared in 1933 and formed the basis for the long-stroke 4-cylinder Rootes engines still being manufactured in 1966 as a Humber car. Also at the end of 1932 overhead inlet valves were dropped. In 1936 the 6-cylinder Humber cars acquired transverse independent front suspension, while the biggest sixes were now of 4.1-litres’ capacity. Only 6-cylinder Humber cars were offered in 1938, and hydraulic brakes appeared on 16hp and 21hp Humber car models in 1939, and were also found on the first Humber Super Snipe – a ‘compact’ evolved by mounting the 4.1-litre engine in the smaller chassis, which was excellent value at £398.

Snipe-based Humber cars served the Allied Forces with distinction in World War 2 and the new models introduced in 1945 were really hold-overs of Humber car parts from 1940, with hydraulics now standardized, together with a new four in the shape of a 1.9-litre side-valve Humber Hawk based on Hillman’s Fourteen of 1938/1940. In 1950 a Humber car (the Super Snipe) took second place in the Monte Carlo Rally. The Super Snipe and Pullman acquired overhead valves in 1953, and the Hawk a year later, while 1956 Super Snipes could be had with automatic transmission. Unitary construction was used on a redesigned Hawk in 1957, and two years later the Super Snipe (after a short period in abeyance) re-emerged as an altogether smaller 2.650cc Humber car, also with unitary construction. This was soon replaced by a 3-litre development with disc front brakes. 1962 Humber car models had the four-headlamp pioneered in America in 1957. A small luxury Humber car came out in 1964 in the shape of the Humber Spectre, based on Hillman’s Super Minx, but with overdrive standard equipment. During 1967 all the big Humber cars were dropped, to be replaced on the British market by the Australian-built Plymouth Valiant. Since 1968 the only Humber car offering has been the 1.7-litre Humber Sceptre, a prestige version of the Hillman Hunter. The 1973 Humber cars had twin-carburettor 79bhp engine, and there was a choice of a 4-speed all-synchromesh gearbox with overdrive on the two upper ratios of automatic transmission.

Source: Georgano, encyclopedia of motorcar; MCS

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Chalmers / Chalmers-Detroit

US, 1908 – 1924

Chalmers Motor Car Co, Detroit, Mich.

The Chalmers was one of the most popular automobiles made in the United States for more than a decade. The Chalmers was the successor to the Thomas-Detroit which was built by a company which had been founded in 1906 by E.R. Thomas (builder of the Thomas car in Buffalo, N.Y.), Roy D. Chapin and Howard Earle Coffin; the two latter had previously served at Oldsmobile. The Thomas-Detroit of which some 500 were sold during the first year of production, was marketed through the parent firm in Buffalo which manufactured a larger line of cars under the Thomas emblem. The Thomas-Detroit was a medium priced four-cylinder car which had been designed by Coffin. In 1907, Hugh Chalmers, vice president of the National Cash Register Co and a noted salesman, entered the firm. Shortly after, he bought a half of E.R. Thomas’ stock and became president of the company which became the Chalmers-Detroit Motor Company. The Thomas-Detroit became the Chalmers-Detroit in 1908 and in 1910, the Chalmers. Open and closed Chalmers models in two lines comprised the Chalmers four-cylinder cars, with self-starters appearing in 1912. Chalmers (as Chalmers-Detroit) had distinguished itself in road races as early as 1908 when W.R. Burns won the Motor Parkway Sweekstakes at Jericho, N.Y., averaging 48.7mph in the six-lap 140.76 mile run.

In 1913, the Chalmers brought out its first 6-cylinder model, as well as the four and apart from small mechanical and design changes, continued both until 1914. The Chalmers four was dropped from the 1915 line, however, and sixes were to be used exclusively in Chalmers until the ending of manufacture. By 1915, some 20.000 Chalmers cars per year were coming off the Chalmers production line and would even exceed that figure before the advent of World War 1. In 1917, an L-head motor replaced the earlier overhead-valve type and on August 4th, Chalmers again headed racing news when Joe Dawson won the 24-hour stock Car Endurance Run at Sheepshead Bay, N.Y. Sales flagged following the end of the war and Hugh Chalmers, always the salesman, and with the realization that a competitor, Maxwell, wasn’t faring well either, arranged to lease his Chalmers plants to Maxwell, using his salesmanship to promote the two concerns and getting the benefit of Maxwell tooling and manufacturing equipment. By the early 1920s, however, many makes of cars were in financial difficulties due to over-expansion and recession, and Walter P. Chrysler was called in to try and reorganize Maxwell. Chrysler was at this time planning his own corporation and in 1922 Chalmers was taken over by Maxwell which had become a Chrysler subsidiary. The last Chalmer cars for sale were equipped with Lockheed hydraulic brakes but 1923 was the last year of Chalmers production with some 9000 units leaving the factories. The Maxwell survived until 1925 when it became the Chrysler Four.

Source: Georgano, encyclopedia of motorcar; KM
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com