Isotta-Fraschini

Italy, 1900 – 1949

(1) Società Milanese d’Automobili Isotta, Fraschini & Cia, Milan, 1900 – 1904

(2) Fabbrica Automobili Isotta-Fraschini, Milan, 1904 – 1949

Cesare Isotta and Vincenzo Fraschini went into partnership in 1899, importing French cars (Mors, Renault) and proprietary engines (Aster); when their company was floated a year later the first Isotta Fraschini cars to bear their names were thinly disguised Renaults with shaft drive and 5hp single-cylinder Aster power units. A 12hp twin Isotta Fraschini car appeared in 1902, but the first wholly Italian designed Isotta Fraschini cars were not seen until 1903. These new Isotta Fraschini cars followed the fashionable Mercédès idiom with pair-cast 4-cylinder engines, side valves in a T-head, low tension magneto ignition, 4-speed gearboxes and side-chain drive. Initially three Isotta Fraschini carmodels were listed – a 4.180cc Isotta Fraschini 12, a 5.426cc Isotta Fraschini 16 and a 7.433cc Isotta Fraschini 24 – and there were few major changes until 1908, though foot accelerators and high tension ignition came in 1906 on Isotta Fraschini cars, and compressed-air starters were offered briefly in 1907, when the largest Isotta Fraschini carcar in the catalogue was the 11.3-litre Isotta Fraschini Tipo C.

Like FIAT and Itala, theIsotta Fraschini carfirm was quick to recognize the prestige value of racing: in 1905 they built an unsuccessful 17.2-litre machine with gear-driven ohc; in 1907 Minoia won the Coppa Florio with a Isotta Fraschini car; and in 1908 Trucco won the Targa Florio. The last year brought numerous successes in the USA, where 40 Isotta Fraschini cars were sold. By 1906 Isotta Fraschini were Italy’s second-ranking manufacturers, after FIAT, but they were hard hit by the Agadir Crisis, and in 1907 there was a successful takeover bid by Lorraine-Dietrich of France, whose intention it was to integrate the Milan Isotta Fraschini car-factory into their organization. By 1909, however, Isotta Fraschini were independent again and had sold a manufacturing licence to Praga in Prague.

A novelty in 1908 was a 1.327cc racing voiturette with ohc 4-cylinder monobloc engine said to run up to 3.500rpm; this Isotta Fraschini car went into limited production as the FENC type. More important, a successful uncoupled 4-wheel braking system was evolved by Oreste Fraschini and Giustino Cattaneo (who had joined theIsotta Fraschini car firm in 1905 and was to be responsible for all Isotta Fraschini cars up to 1935). This was available on production Isotta Fraschini cars by 1911, and three years later was standardized on the larger Isotta Fraschini cars. The 1909 range included a modern sv monobloc four, the ENC, available in 2.1-litre and 2.2-litre forms, though the old combination of T-head engine and chain drive persisted until 1913. The smaller Isotta Fraschini cars of 1914 closely paralleled the offerings of FIAT and Itala, coming in 2.3-litre, 3-litre and 4.4-litre sizes, with monobloc engines, 4-speed gearboxes, and optional electrics. However, for the enthusiast the Isotta Fraschini car company offered some 16-valve ohc sports cars with 4-wheel brakes and chain drive – the 6.2-litre Isotta Fraschini TM and the 10.6-litre Isotta Fraschini KM. The latter boasted dual magneto ignition, could be had with pear-shaped or V-radiator, and this Isotta Fraschini car was capable of 85-90mph on 140bhp. A Isotta Fraschini car with 130bhp 7.2-litre engine was raced unsuccessfully at Indianapolis in 1913, and there was also a shaft-driven variant of the TM, designated the Isotta Fraschini TC.

After World War 1 Cattaneo switched to a one-model Isotta Fraschini car programme with the Isotta Fraschini Tipo 8, a 5.880cc 9-bearing pushrod ohv straight-8 with alloy block, magneto ignition, 3-speed unit gearbox, central ball change, multi-plate clutch, semi-elliptic springing, and coupled 4-wheel brakes. Output was 80bhp at a low 2.200rpm, and the Isotta Fraschini car was conceived from the start as a chauffeur-driven carriage – hence the ponderous handling that attracted unfavourable comparisons with the contemporary 32CV Hispano-Suiza. Most straight-8s were exported: of 1.370 delivered Isotta Fraschini cars between 1919 and 1935 about 450 went to the United States and there were agencies in eight foreign capitals. In 1925 the Isotta Fraschini Tipo 8 gave way to the 7.4-litre Isotta Fraschini 8A with servo brakes, higher gear ratios, and an output of 110 – 120bhp; the 135 bhp Isotta Fraschini 8ASS sports version was said to do 104mph. By 1929 a Isotta Fraschini carlimousine cost £2.900 in London or $22.750 in New York. Two years later came the last of Isotta Fraschini car with a straight-8, the Isotta Fraschini 8B. This had a redesigned engine capable of 3.000rpm, coil ignition, and a stiffer and deeper frame; from 1932 Isotta Fraschini car was available with a 4-speed preselective gearbox, a conversion initiated by Antione Lago, then the Isotta Fraschini company London agent. In 1934 a 4-speed synchromesh box was offered, but by now sales were down to a trickle (only 25-30 8Bs were made all told, as against 950 8As) and the Isotta Fraschini car company, after unsuccessful negotiations for a merger with Henry Ford, elected to concentrate on aero engines. In 1936 Isotta Fraschini joined the Caproni organization, and their only roadgoing products were diesel trucks made under MAN-licence.

There was a final comeback of Isotta Fraschini cars in 1947 with the Rapi-designed 8C Monterosa – Isotta Fraschini never marketed a six. This Isotta Fraschini car had a 90 degrees ohc V8 engine mounted at the rear of a platform chassis, with independent front suspension by rubber in compression and swing-axle rear suspension. The 5-speed all-synchromesh gearbox incorporated an overdrive top, brakes were hydraulic, and a curious feature was an ignition warning light that went out in the event of trouble. Various cylinder capacities were tried: the 1947 Paris Salon Isotta Fraschini car had a 3.4-litre unit, but production models were to have had 2.544cc engines. Prototype Isotta Fraschini cars wore aerodynamic convertible and closed coachwork by Touring of Milan, but less than 20 Isotta Fraschini 8Cs had been built when the factory was shut down by order of the Italian government. The name Isotta Fraschini was acquired by the Breda armaments firm, who attempted a revival of the diesel commercial vehicle range as late as 1958

Source: Georgano, encyclopedia of motorcar; MCS

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Chalmers / Chalmers-Detroit

US, 1908 – 1924

Chalmers Motor Car Co, Detroit, Mich.

The Chalmers was one of the most popular automobiles made in the United States for more than a decade. The Chalmers was the successor to the Thomas-Detroit which was built by a company which had been founded in 1906 by E.R. Thomas (builder of the Thomas car in Buffalo, N.Y.), Roy D. Chapin and Howard Earle Coffin; the two latter had previously served at Oldsmobile. The Thomas-Detroit of which some 500 were sold during the first year of production, was marketed through the parent firm in Buffalo which manufactured a larger line of cars under the Thomas emblem. The Thomas-Detroit was a medium priced four-cylinder car which had been designed by Coffin. In 1907, Hugh Chalmers, vice president of the National Cash Register Co and a noted salesman, entered the firm. Shortly after, he bought a half of E.R. Thomas’ stock and became president of the company which became the Chalmers-Detroit Motor Company. The Thomas-Detroit became the Chalmers-Detroit in 1908 and in 1910, the Chalmers. Open and closed Chalmers models in two lines comprised the Chalmers four-cylinder cars, with self-starters appearing in 1912. Chalmers (as Chalmers-Detroit) had distinguished itself in road races as early as 1908 when W.R. Burns won the Motor Parkway Sweekstakes at Jericho, N.Y., averaging 48.7mph in the six-lap 140.76 mile run.

In 1913, the Chalmers brought out its first 6-cylinder model, as well as the four and apart from small mechanical and design changes, continued both until 1914. The Chalmers four was dropped from the 1915 line, however, and sixes were to be used exclusively in Chalmers until the ending of manufacture. By 1915, some 20.000 Chalmers cars per year were coming off the Chalmers production line and would even exceed that figure before the advent of World War 1. In 1917, an L-head motor replaced the earlier overhead-valve type and on August 4th, Chalmers again headed racing news when Joe Dawson won the 24-hour stock Car Endurance Run at Sheepshead Bay, N.Y. Sales flagged following the end of the war and Hugh Chalmers, always the salesman, and with the realization that a competitor, Maxwell, wasn’t faring well either, arranged to lease his Chalmers plants to Maxwell, using his salesmanship to promote the two concerns and getting the benefit of Maxwell tooling and manufacturing equipment. By the early 1920s, however, many makes of cars were in financial difficulties due to over-expansion and recession, and Walter P. Chrysler was called in to try and reorganize Maxwell. Chrysler was at this time planning his own corporation and in 1922 Chalmers was taken over by Maxwell which had become a Chrysler subsidiary. The last Chalmer cars for sale were equipped with Lockheed hydraulic brakes but 1923 was the last year of Chalmers production with some 9000 units leaving the factories. The Maxwell survived until 1925 when it became the Chrysler Four.

Source: Georgano, encyclopedia of motorcar; KM
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com