Austro-Daimler

Austria, 1899 – 1936

(1) Österreichische Daimler Motoren AG, Wiener-Neustadt, 1899 – 1934

(2) Steyr—Daimler-Puch AG, Wiener-Neustadt, 1934 – 1936

Austria’s most famous motor car, the Austro-Daimler, was born when Daimler of Cannstatt established a factory in Vienna for the manufacture of about 100 of its Daimler cars annually. The Austro-Daimler was a copy of its German parent. In 1906 the Austro-Daimler concern became a separate financial entity, and a year earlier, Ferdinand Porsche had replaced Paul Daimler at Wiener-Neustadt as director. A new era began, for Porsche was a designer with original ideas. He did not exercise them at once; the two 1909 Austro-Daimler models for sale were large well-made fours with side valves in a T-head and a choice of chain or live-axle drive. World-wide fame came to the Austro-Daimler company with their 1910 models, especially the Austro-Daimler 22/80ps model originally designed to win the Prince Henry Tour of that year. It accomplished this very convincingly. The five large valves per cylinder – one inlet, four exhaust – were actuated by a single overhead camshaft. A combination of well-shaped combustion chambers and light reciprocating parts made for an engine of an efficiency never before seen in a catalogued, non-racing car. Its 5.7-litres produced 95bhp. Even Porsche, however, felt that so much power could not be safely transmitted by a live axle, and chain drive was used initially. The Austro-Daimler 22/80’s small brother, the Austro-Daimler 16/18ps, had a side-valve L-head engine. After it had swept the board in the Austrian Alpine Tour of 1911, the Austro-Daimler 16/25ps Alpine variant was also for sale. In 1914 the range consisted of these three cars, the sv Austro-Daimler 20/30ps, and the luxurious Austro-Daimler 35/60ps also with side valves. Both Austro-Daimler and Daimler sold the Lohner-Porsche, the name given to the electric and petrol-electric cars designed by Porsche before he went to Wiener-Neustadt. The Vienna Austro-Daimler firm was Austria’s largest manufacturer of motorcars.

Immediately after World War 1 a few cars were assembled in Liège from pre-war Austro-Daimler parts by M. Klinkenhammers, and sold under the Alfa-Legia. On their home ground the company returned to high-grade fast tourers. As well as the old ‘Austro-Daimler 16/18’ and ‘Austro-Daimler 20/30’, they made the new Austro-Daimler AD617 for sale, a 6-cylinder car of 4.4-litres with a single overhead camshaft, that was succeeded in 1923 by its development, the Austro-Daimler ADV17/60ps for sale, which was the same but for its front wheel brakes. Four years earlier, Porsche had maintained his reputation for really exciting design by producing the Sascha-type Austro-Daimler, a 1100cc – later 1½-litre – racing voiturette. Its four cylinders, like the six of the Austro-Daimler AD617, were of aluminium, with detachable steel liners. There were two overhead camshafts, however, and dry sump lubrication. The power output was 50bhp. Four-wheel brakes were, of course, fitted.

Although Porsche left Vienna in 1923 to return to Daimler, he was mainly responsible for the new ADM type, which was offered alongside the Austro-Daimler ADV17/60 from that year. The Austro-Daimler ADM1 was basically similar, but had a smaller engine of 2½-litres, and its rounded radiator was a departure for the hitherto traditional Austro-Daimler V-shape. It was sold in sports from in 1925 as the Austro-Daimler ADMII. After 1926, the old Austro-Daimler ADV17/60 was dropped and the ADM engine was enlarged to three litres by increasing the bore. This Austro-Daimler ADMIII in sports form developed 100bhp at 400rpm, and could do more than 100mph. Porsche’s successor, Karl Rabe, designed the even more advanced ADR type. Its tubular backbone chassis and swing-axle independent rear suspension so resembled that of the Tatra that legal action was taken against Austro-Daimler. The Austro-Daimler ADR was available in sports or normal form. At first, the Austro-Daimler ADR used the old ADMIII engine, but the Austro-Daimler ADR6 Bergmeister of 1929, one of the most glamorous Austro-Daimler built, had a new 3.6-litre power unit providing 120bhp. This car was made until production ceased shortly after the Steyr-Daimler-Puch amalgamation in 1934. The Austro-Daimler ADR8, the firm’s first and last 8-cylinder car, designed for more formal bodies, had disappeared in 1933 after a life of three years.

Source: Georgano, encyclopedia of motorcar; TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Morgan

GB, 1905 – 1906

Morgan and Co Ltd, Leighton Buzzard, Beds.

Made by a well-known firm of coachbuilders, the Morgan car was a conventional shaft-driven car with 5.8-litre T-head 4-cylinder Mutel engine, distinguished only by the Sparks-Boothby hydraulic clutch on the Morgan car, soon abandoned in favour of an ordinary leather cone. Only about five Morgan cars were made and their lack of success resulted in Morgan cars becoming Adler concessionaires in 1907, and abandoning motor manufacture.

GB, 1910 to date

Morgan Motor Co Ltd, Malvern Link, Worcs.

This Morgan car was the best-known, and best, of the British 3-wheelers that were popular while the horsepower tax gave the Morgan cars an advantage. H.F.S. Morgan’s tricycle was also the first of its type, this Morgan car going into production in 1910. At the front of a tubular chassis frame was an sv, air-cooled V-twin motor-cycle engine of 1.100cc by JAP, transversely mounted. Transmission of the Morgan car was by dog clutches and chains, providing two forward speeds. The steering was direct. The front wheels of the Morgan car, had independent front suspension, by sliding pillars and coil springs. There were two seats. A reasonable amount of power plus light weight meant an excellent performance of the Morgan cars. The Morgan car was safer than most 3-wheelers because its road-holding was above average. This recipe made the Morgan car popular with sportsmen, for whom the Morgan Grand Prix model was produced in 1914: the first catalogued competition Morgan car. Soon afterwards, an exiguous four-seater Morgan car, the forerunner of the Morgan Family model of the 1920s, was listed.

After World War 1, Morgan carscontinued to cater for all markets. Names changed, but the Morgan Sports or Morgan Standard model was the normal two-seater, also available in De Luxe form; the Morgan Family model was the more capacious type Morgan car, and the long-tailed Morgan Aero, later the Morgan Super Sports, was the Morgan car intended for serious speed work. Engines of Morgan cars were water- or air-cooled to choice, most being supplied by JAP, or by Blackburne in the case of the competition Morgan cars. From 1925 all the latter’s power units had overhead valves. By 1927 the Super Sports Morgan car could attain 80mph in standard trim, while the less sporting Morgan cars now had internal expanding front wheel brakes and electric starting. Geared-down steering and (if required) three forward speeds followed on Morgan cars in 1929. Even so, Morgan cars were losing customers to new, cheap sports cars such as the M-type MG. Three speeds and reverse in a normal gearbox (though still with chain final drive) were available from 1931 and standard on the Morgan car after 1932, and a modified 8hp Ford 4-cylinder engine could later be had in the Morgan car instead of the twin. Four years later the first 4-wheeled Morgan car was introduced, the excellent little Morgan 4/4. This Morgan car used an 1.122cc 4-cylinder Coventry-Climax engine with overhead inlet valves, developing 34bhp. The Morgan car was still light in weight, and retained the Morgan independent front suspension, so the performance and handling qualities of Morgan cars were well up to form. The Morgan car could attain 75mph. The twins were last catalogued in 1939.

Just before World War 2, a 1.267cc Standard 10hp engine with ohv head was substituted in the Morgan 4/4. When this was no longer available, from 1950, Morgan fitted a tuned Standard Vanguard unit in the Morgan car giving 70bhp. In this Morgan Plus Four, as the Morgan car was renamed, performance became still more lively, and when the 90bhp Triumph TR2 engine became available in 1954, maximum speed of the Morgan car rose to 100mph for the first time. With the advent of the Morgan Plus Four, there was no longer a small Morgan car, but this gap was made good in 1955, when the Morgan Series 2 4/4 arrived. This Morgan car used the very hard-wearing 1.172cc sv Ford Ten engine which had powered F4 Morgan. (The latter was the last 3-wheeler Morgan car, which had been made until 1950.) The result was a cheap, pleasant and reliable sports Morgan car of the old school. Later, the ohv Ford 105E engine was substituted. The latest version Morgan car had a 1.599cc 98bhp engine, a 4-speed all-synchromesh gearbox, front disc brakes, and the traditional Morgan suspension. The Morgan Plus Four kept pace with Triumph’s TR engine development, also acquiring disc brakes and, eventually, the 2.138cc 105bhp TR4 unit. A streamlined coupé, the Morgan Plus Four Plus of 1964, was a brief deviation from the classical Morgan car line which met with little approval and was discontinued after only 50 of these Morgan cars had been sold. When Triumph changed to a six during 1968, Morgan cars adopted a new engine for their bigger Morgan cars, and the Morgan Plus Four became the Morgan Plus Eight, powered by Rover’s 3 ½-litre 160bhp V8 and capable of 125mph. The 1973 versions of the Morgan car use the 4-speed all-synchromesh Rover gearbox in place of the Moss box previously fitted.

Source: Georgano, encyclopedia of motorcar; MCS, TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com