Benz

D, 1885 – 1926

(1) Benz & Co, Rheinische Gasmotorenfabrik, Mannheim, 1885 – 1899

(2) Benz & Cie, Rheinische Gasmotorenfabrik AG, Mannheim, 1899 – 1911

(3) Benz & Cie, Rheinische Automobil- und Motorenfabrik AG, Mannheim, 1911 – 1926

Karl Benz is honoured throughout the world as the man who designed and built the first workable motor car driven by an internal combustion engine. It is established that in 1885 his first Benz car was ready and made its first trials. Benz’s ideas were concentrated from the beginning on a car as an organic unit of chassis and engine, not on motorization of existing vehicles. The first Benz car was a three-wheeler with two driven rear wheels. The engine was a horizontal single-cylinder with a vertical crankshaft which had a horizontal flywheel. It developed ¾hp and a speed of 8mph is recorded for one of the first trial runs. This prototype Benz car had some featured which are still very extensively used in automobile construction: the water-cooled engine, electric ignition, mechanically operated inlet valve, and a differential gear. This first Benz car still exists and belongs to the Deutsches Museum, Munich, to which it was presented by its inventor. Several Benz Patentwagen replicas were built and are now in different museums.

Only a few Benz cars were produced and for sale in the following years. At the Munich Exhibition of 1888 Benz had the opportunity of showing his improved Benz car to a wider public. Instead of the wire wheels of the first Benz Patentwagen the later models had wooden-spoked wheels. Engine output was increased to 2hp. Sales of Benz’ stationary gas engines were quite satisfactory, while interest in Benz motor cars was very limited and it was not until 1890 that Benz started a real, if small, ‘to order’ production. This was partly a result of exhibiting his Benz car at the Paris World Fair in 1889 which led to increasing sales by his French agent Emile Roger, who already sold Benz stationary engines. The other important factor was that Benz was joined by two new partners in 1890. These two men who possibly saved Benz from the fate of numerous other inventors, driven aground by financial difficulties, were Friedrich von Fischer and Julius Ganss. Fischer took over internal administration and Ganss became responsible for sales. Benz himself was free for further developments on the technical side of the business, which made sound progress. 1893 saw the production of the first 4-wheeled Benz car, the Benz Victoria. This model was also the basis for the first Benz van and Benz bus in 1895; its technical conception was also adopted for the Benz Velo of 1894. This model has a place in the history of motoring as the world’s first production car. Production figures for 1885 to 1893 were 69 cars. 67 cars left the factory in 1894, mainly Benz Velos. These figures increased to 135 cars in 1895 and 181 in 1896.

In 1896 the first Benz Kontra-Motor appeared, an engine with two horizontally opposed cylinders. The first Benz lorry was produced in the same year. In 1898 pneumatic tyres were adopted for the Benz Comfortable. Production in 1899 was 572 cars, which brought Benz into the first rank of car producers. This number was surpassed in the following year with a production of 603 units. The first Benz racing car appeared in 1899 and was the start of numerus racing successes.

After 1901 sales of Benz cars declined as Benz stuck to his now outdated designs. Mercedes’ successes led him to evolve new concepts of construction; the result was the 2-cylinder front-engined Parsifal presented in 1903, available with cardan or chain drive and various engine outputs. In the same year a new 4-cylinder engine appeared and was used in all subsequent Benz models. A 1903 racing car developed 60hp and participated in the Paris-Madrid race. Karl Benz himself left the company in 1903 although he rejoined shortly afterwards. In 1906 he joined his sons in the firm of C. Benz Söhne.

1906 saw Benz gaining a second place in the Herkomer Trial while in the same event in 1907 a 5hp Benz finished first. Second and third place in the Coppa Florio, 1907, first place in the Florida 100-Miles Race, 1908, second and third place in the French Grand Prix, 1908, and second and fourth place in the American Grand Prix, 1908, led the world records which were set with 150hp and 200hp Benz cars by Bruce-Brown, Robertson, Oldfield and Hémery. With the 200hp Blitzen Benz Burman covered a mile in 25.4 seconds from a flying start at Daytona Beach in 1911. This was a speed of 140.8mph, but was not recognized internationally as a Land Speed Record.

In 1910 Benz acquired the Süddeutsche Automobil-Fabrik of Gaggenau. Production of private Benz cars in this factory was given up and in the following years Benz concentrated on commercial vehicles there.

A wide range of Benz cars for sale was marketed in the 1910-1914 period, ranging from the 2-litre Benz 8/20ps up to really big machines like the 10.1-litre Benz 39/100ps, all with side valve engines and shaft drive. However, the 22-litre Benz 200hp (which cost £1800 in England in 1912, and must have been the largest-engined private car to go on the market) had ohv and final drive by side chains. Benz were successful in the Austrian Alpine Trials, the Tatra-Adria Trial and various trials in Russia, to name only a few. The great promoter of German motoring, Prince Henry of Prussia, used only Benz cars.

The first Benz 6-cylinder car was produced in 1914 with the type Benz 25/65ps 6.5 litre. In 1918 the Benz 6/18ps 4-cylinder 1540cc appeared, a type developed during the war. A very important Benz development was the precombustion chamber diesel engine. It was first used in 1922 for Benz Sendling agricultural tractors, and the first diesel-engined lorry by Benz appeared in 1924. These were steps towards later Mercedes-Benz diesel-engined cars. Another idea introduced by Benz which also appeared in later Mercedes-Benz cars was the swing axle. It was one feature of the 2-litre 6-cylinder Benz ‘teardrop’ racing car designed on Rumpler principles. However, this car was not a great success either in its racing or in its sports version. In the Grand Prix of Italy in 1923 they gained fourth and fifth place. In 1924 Benz and Mercedes began to combine their interests, amalgamating in 1926.

Source: Georgano, encyclopedia of motorcar; HON

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Plymouth

US, 1928 to date

Chrysler Corporation, Detroit, Mich.

The 4-cylinder 21hp Plymouth car appeared in 1928 at a list price of $725 for a sedan. This Plymouth car replaced the earlier 4-cylinder Chryslers and represented a serious challenge for Ford and Chevrolet in their lowest price class. The Plymouth car had side valves, internal-expanding hydraulic brakes and ribbon-type radiator and gave the Plymouth car a close resemblance to the 1928 Chryslers and De Sotos, and Plymouth cars sold over 100.000 in its first year, even improving its sales position in the bleak economic climate of 1932. Plymouth cars adhered to four cylinders until 1933, when the Plymouth PD-series 6-cylinder was listed at less than $600. 1934 de luxe models of Plymouth cars had independent front suspension, but this was dropped after a year and did not reappear for some time on Plymouth cars. The standard engine in the later 1930 Plymouth cars had a capacity of 3.3-litres, rather smaller than that used in comparable Chevrolets and Fords: a small-bore 2.8-litre version Plymouth car was made for export up to 1939, but the name Plymouth was not usually found on Plymouth cars sold in England, which were nominally Chrysler Kew and Wimbledon sixes. After World War 2 evolution followed that of other Chrysler Corporation cars closely, the old-fashioned styling losing the Plymouth car division its long-held third place in American sales to Buick. Further, Plymouth cars retained the L-head six as its staple power unit right up to 1955, when Flight Sweep versions were introduced with over-square ohv V8 engines on accepted American lines in a variety of powers from 157 to 177bhp. The capacity of these Plymouth cars had 4.3-litres, while the six, now of 3.8-litres, remained available. These 1955 Plymouth cars were lower and longer than their predecessors and could be obtained with synchromesh, overdrive or automatic gearboxes.

The Plymouth Fury models of the ensuing decade represented a breakaway from the traditional Plymouth stolid family car, while the Plymouth Car Division was also responsible for Chrysler’s contribution to the compacts, the Plymouth Valiant launched for 1960. This Plymouth car had rather more European styling than its competitors, with a dummy spare-wheel moulding on the tail; interesting items of specification were the unitary construction of the Plymouth car, alternator ignition, and inclined in-line 2.8-litre ohv 6-cylinder engine. The influence of the Plymouth GT car on America resulted in the Plymouth Barracuda of 1965, a fastback coupé using the Valiant’s 8ft 10in wheelbase and a 4½-litre V8 power unit. Plymouth cars, like Ford and Chevrolet, was aiming at comprehensive coverage of the low and medium price market in 1966, with the compact Plymouth Valiant, the sports-compact Plymouth Barracuda, the medium-sized Plymouth Belvedere, the full-size Plymouth Fury, and the luxurious ‘VIP’ 4-door hardtop Plymouth car, offered only with a 5.2-litre V8 engine and selling for $2.930. An increasing emphasis on sporting Plymouth cars was detectable by 1968, when in addition to the established Barracuda there were two other sports coupés Plymouth car, the Plymouth GTX and the Plymouth Road Runner. All three Plymouth cars were available with 4-speed manual gearboxes and the 6.981cc 425bhp hemi-head V8 also used by Dodge. In 1970, when Valiant prices started at a low $2.172, there was also a Valiant sports coupé, the Plymouth Duster.

In 1971 Plymouth car company added a sub-compact to their Plymouth car range when they offered the 1½-litre Hillman Avenger as the Plymouth Cricket. The 1972 range of Plymouth cars embraced the Valiant on a 9ft wheelbase, the Barracudas and Satellites, and the full-size Furys with V8 engines and automatic transmission as standard. Engines in the Plymouth cars ranged from the Valiant’s 3.2-litre and 3.7-litre sixes up to the largest Chrysler unit, a V8 of 7.210cc. Electronic ignition was offered on the costliest Barracuda model. Casualties of new Federal regulations were the hemi-head engine and convertibles, and the same range Plymouth cars with minor improvements, among them manually-operated sun roofs, was offerd in 1973.

Source: Georgano, encyclopedia of motorcar; MCS

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com