The global magazine and marketplace for classic car enthusiasts, by enthusiasts.
The global magazine and marketplace for classic car enthusiasts, by enthusiasts.




Edward Lisle Sr’s Star Motor Co, an offshoot of the Star Cycle Co, produced its first Star car in 1898, and offered the Star car for sale in the following year. The Star car was a Benz-based machine, with a single-cylinder, water-cooled 3½hp engine, belt primary drive and chain final drive. It was an improvement in that water circulation on the Star car was assisted by a pump. In 1900 there followed a 2-cylinder Star car with 3 forward speeds, still on Benz lines. 1901 brougth De Dion-engined single-cylinder Star cars, and 1902 an 8hp twin of Panhard type in addition. Other, larger Star cars of Panhard ancestry joined the 8hp, up to a 20hp four Star car. By 1904, although a De Dion-powered single and Panhard-type twin were still there, the bigger machines were of Mercédès pattern, these Star cars came with honeycomb radiators, mechanically-operated inlet valves and pressed-steel frames. All veteran Star cars up to 1914 were extremely well-made, well-furnished, conventional, rather expensive cars lacking in technical originality, showing a line of development appearance in the 1907 range. The best-known Star car of the veteran period was the excellent 15hp Star car of 1909, a shaft-driven 2.8-litre four which had become the 3-litre 15.9hp by 1914. A great variety of other Star cars, basically similar models were turned out, not only by Star but also by the Star Cycle Co. The latter, run by Edward Lisle Jr, had made motor tricycles and bicycles, and produced the Starling car in 1905. It had 2 forward speeds and a De Dion single-cylinder engine, but was otherwise of Panhard type, with armoured wood frame and chain drive. One year later the Star car company supplemented it with the more modern Stuart car, which had 2-cylinders, 3-speeds and shaft drive. This name was dropped in 1908, all models being called Starlings, but these too, disappeared in 1909 when Star cars cheaper line was entrusted to the new Brion Motor Co, a more indepented concern that was still run by Edward Lisle Jr. So popular was the Star car that its makers were among the six largest in the country before 1914.
The 15.9hp Star car was continued after World War 1, together with another sv four Star car of pre-war origin, the 20hp Star car of 3.8-litres. A modern light Star car of fashionable type, the 11.9hp, arrived in 1921. This Star car used a 1.795cc sv engine with a detachable head, made in unit with a 3-speed gearbox which had central change. By 1924, the 11.9 Star car had grown up into the 2-litre 12/25hp Star car. It shared cylinder dimensions with the 18hp Star car, which was a new 3-litre six. The 12/25 Star car could be had as a very fine fast touring car with overhead valves and 54bhp, in which form the Star car was called 12/40hp. Thereafter, the Star car range reverted to its pre-war complexity. By 1927, there were three sv Star car models and two additional and more up-to-date Star cars with overhead valves. The 14/40hp Star car, new in 1926, was a solid 2-litre, ohv machine which in spite of having only 4-cylinders and 3 forward speeds, this Star car was a notably smooth and flexible car, thanks to a 5-bearing crankshaft. The ohv 20/60hp Star car, a 2½-litre six with the same bore and stroke as the 14/40 and a 7-bearing crankshaft, was the most luxurious Star car. A light six, the popular ohv 18/50hp, joined the Star car range in 1928, the year of the Star car company’s acquisition by Guy, and replaced the 14/40 Star car for 1929. By this time, the sv Star cars had gone, leaving the two sixes. As the 18hp Star Comet and the 21hp Star Planet, these Star cars were revised with handsome bodies and very full, luxurious equipment, including one-shot chassis lubrication, thermostatically-controlled radiator shutters and a built-in jacking system. Two other engines, of 14hp (2-litres) and 24hp (3.6-litres) were also obtainable in Star cars for 1932, as alternative Comet and Planet power units. These Star car were the last new Star cars, for they were too expensive to make, and the times favoured the mass-produced economy car. Production of Star cars ended in March 1932, but the unsold stock was sold by McKenzie and Denley of Birmingham, and the Star car was quoted in the Buyer’s Guide lists until 1935.
This Star car was driven by a single-cylinder, watercooled engine of 1.9-litres, mounted beneath the front seat, with false bonnet and coil radiator in front. A champion planetary transmission and double chain drive was used on this Star car. Both two- and five-seater Star cars were made, the latter with rear entrance.
Star runabouts were offered in three models, selling for $500, $600 and $700 respectively. The smallest Star car was an open two-seater, and shaft drive was employed on all Star cars.
The short-lived Star car from Peru was offered in conventional 2- and 4-cylinder forms. The twin was chain-driven, while the big, expensive four Star car ($4.000) had shaft drive.
William Crapo Durant’s Star Four was one of the most serious attempts to take away some of the Model T Ford’s market, for the cheapest practical car. Unlike the Ford, the Star car was an assembled machine.The Star car had a 2.2-litre, 4-cylinder engine by Continental, and was conventional in design in every way except the gearbox, which was separate; a feature common to all the vehicles in Durant’s empire, but very unusual in American mass-produced cars by the early 1920s. The touring Star car cost only $443 in 1923, which helped Star to be the seventh biggest seller in America that year. The Star car was sold outside the United States as the Rugby. In 1926, a 2.8-litre six Star car was introduced. Front wheel brakes appeared in 1927 but a year later the Star car make disappeared in the collapse of the Durant interests. By this time, 250 Star cars a day were being turned out. Only the Four was still called the Star car for the 1928 model year, as the Six was now known as the Durant Model 55.
Source: Georgano, encyclopedia of motorcar; TRN, GMN, MJWW, TRN
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com
Salmson was renowned for their water-cooled (and later air-cooled) radial aero engines, and Salmson entered the car industry by taking out a manufacturing licence for the GN in 1919. 3.000 of these Salmson cars were turned out in two years. The first Salmson cars proper appeared in 1921. These Emile Petit designs had flimsy cyclecar-type chassis with shaft drive and differential-less back axles, with a St. Andrew’s Cross motif on the radiator. The standard engine of the Salmson cars was an odd 1.100cc monobloc four with a single push-rod per cylinder, which also operated the inlet valves as a pull-rod on the Salmson cars. Ignition was by Salmson cars own type of magneto and cooling was by thermos-syphon. This ohv unit worked reasonably well on the Salmson cars at low speeds, gave 45mph and 45mpg, and a two-seater Salmson cars could be bought in England for £265, the price dropping steadily to £158 by 1926. At the same time Petit produced something a far more advanced Salmson cars for the Cyclecar Grand Prix in the shape of a twin-ohc unit of similar capacity with dual magneto ignition and 2-bearing crankshaft: with one of these Salmson cars Lombard won the race, as well as taking 2nd place (behind a GN) in the 200 Mile Race at Brooklands. This was followed by 1st and 2nd places in both these events in 1922 with a Salmson cars, class wins in both the Cyclecar Grand Prix and the first Le Mans 24 Hour Race in 1923, at San Sebastian in 1925, and in both Le Mans and the Targa Florio in 1926. 1927 marked the peak of Salmson cars competition career, with 2nd and 3rd places in general classification at Le Mans (as well as Class and Biennial Cup wins of a Salmson cars), and a 2nd place in the Coupe de la Commission Sportive run under consumption rules.
The Salmson cars firm also built a 750cc engine for the 1923 Cyclecar Grand Prix – the Salmson car won its class but this Salmson car was never produced commercially. Nothing came, either, of Petit’s ingenious 1927 1.100cc twin-blown twin-ohc straight-8 Salmson car with desmodromic valves, said to give 140bhp at 8.000rpm.
Touring Salmson cars progressed to twin overhead camshafts with the advent of the 1.2-litre 10hp in 1922; there was still no differential or front wheel brakes on the Salmson car (though the latter had appeared on the racers), but a starter was standard and quarter-elliptic springs had given way to semi-elliptics. From 1925 onwards the twin-cam 1.100cc sports Salmson cars came into their own, and by 1926 the adoption of a cowled radiator completed the Salmson cars classic outline. There were variations of specification, but all the sports models Salmson cars came with front-wheel brakes, balloon tyres, and differential-less back axles, and ranged from the 3-speed Grand Prix Salmson cars with splash lubrication and 2-bearing crank at £265, giving over 70mph, to the GP Special, which Salmson car had full-pressure lubrication and 4 forward speeds, available in Cozette-blown form at £475. Meanwhile the 10/15 Salmson car had acquired front-wheel brakes, and at the end of 1926 the differential arrived on a bigger 12/24 Salmson car with dynamotor, V-radiator, and a 9ft 4in wheelbase giving room for more commodious coachwork.
The vogue for small French sports cars vanished as quickly as it had come, though Salmson cars once more collected the Biennial Cup at Le Mans in 1928, and the twin-cam sports models Salmson car were still listed in Britain as late as 1931. The arrival of the MG Midget killed what sales there were of the Salmson car, and Salmson, like Amilcar, tried their hand at small luxury machines; a twin-cam 1.6-litre six-cyl Salmson car for 1929 never went into production, but its successor, the Salmson S4, had a longer run. This Salmson car retained the twin-cam engine and 3-bearing crank, magneto ignition, gravity feed, and 3-speed gearbox, but it usually wore saloon bodywork, and the Salmson car was not notably fast for a price of £325. The Salmson car had grown up by 1933 into the 4-speed 1½-litre Salmson S4C with rear tank, which formed the basis for the 12hp British Salmson cars made at Raynes Park from 1934 onward. The 1.6-litre Salmson S4D of 1935 still had a magneto, but featured transverse independent front suspension and a 4-speed Cotal electrically-selected gearbox, and twin-ohc saloon cars in two engine sizes were listed in 1939. The bigger of these Salmson cars beasted 2.3-litres and 70bhp, and had hydraulic brakes. The English price for the Salmson car was £495. The same models Salmson cars reappeared in 1946, when a few 90bhp competition Salmson cars were made with 2.3-litre engine. Over a thousand Salmson cars found customers in 1950, but thereafter the decline was rapid.
A new 2.2-litre Salmson Randonnée model with a light alloy engine and Cotal gearbox came out in 1951, and 1953 produced the Salmson 2300 aerodynamic coupé with half-elliptic instead of cantilever rear springing, wire wheels, and a tuned version of the twin-cam engine giving the Salmson car 105bhp and over 100mph. This Salmson car was made in small numbers until 1957, but a year previously the had been heralded when Renault acquired the factory site. Last of the Salmson cars was a long-wheelbase version of the Salmson 2300 with 4-door saloon bodywork.
Source: Georgano, encyclopedia of motorcar; MCS
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

