Crossley

GB, 1904 – 1937

(1) Crossley Brothers Ltd, Gorton, Manchester, 1904 – 1910

(2) Crossley Motors Ltd, Gorton, Manchester, 1910 – 1937

The name of Crossley was famous on engines before it was famous on cars; in fact the Crossley company was the first in Britain to make 4-stroke internal combustion engines on the Otto principle. Later, Daimler engines were made under licence. The first Crossley car for sale, a chain-driven 22hp 4-cylinder, appeared for the 1904 season. A Crossley 28hp and Crossley 40hp followed, all three cars being of normal design and foreign inspiration. Their designer was J.S. Critchley, formerly of Daimler. Shaft drive appeared in 1906, and late in 1909, some were fitted with Allen-Liveredge front-wheel brakes, but Crossley cars, though excellent machines, made little impression until after 1910. The 4-litre 20hp Crossley which then made its bow was a well-constructed, durable and very popular car. Designed by A.W. Reeves, it lived on in modified form until 1925. Crossley’s finest hour came in World War 1, when, as the Crossley 20/25hp it achieved fame as a staff car in the Royal Flying Corps, and as an ambulance and light truck. The Crossley model was extremely popular with the British Royal Family after the war in its 25/30hp version. In its early years, however, it was rivalled by the 15hp. The efficiency of the latter’s  otherwise conventional engine, a side-valve four like the rest, gave this Crossley a better performance than most cars in its class and encouraged the makers to offer a special sporting variant, the Crossley Shelsley.

The Crossley Fifteen was discontinued after 1914, but a new Crossley arrived for 1921. This Crossley 19.6hp was a rather more modern design, having a detachable cylinder head, and it was cheaper and lighter on fuel than its 25/30hp companion. The performance was about the same. It was also made in sporting form as the Crossley 20/70hp, but this model was heavy, like the ’Crossley 19.6’ itself, and the brakes were not good enough for the 75mph that was available. Crossley did not make a serious attempt to invade the middle-class market until 1923, when the Crossley 12/14hp, later called the Crossley Fourteen, was introduced. Like its brothers, this was a simple side-valve four, in this case of 2.4 litres, but was more modern, with its unit construction of engine and gearbox and central gear-change. The Crossley Fourteen was a very successful model, being flexile and, thanks to its light weight, both roomy and economical. It survived until 1927. By this time the two bigger Crossley cars were giving way to a much more up-to-date car; the Crossley company’s first six and its first overhead-valve machine. This Crossley 18/50hp model was a spacious, heavy 2.6-litre car with good brakes but somewhat lacking in power. Its engine was enlarged to 3.2-litres and 20.9hp for 1928. At the same time a new small Crossley of similar design, the 2-litre Crossley 15.7hp was introduced, to which a sporting alternative reviving the Shelsley name was  added in 1929. Lagonda’s 16/80 model used this engine later. The 6-cylinder Crossley 15.7hp continued until 1934 and the Crossley 20.9hp until 1937. Wilson pre-selector gearboxes were fitted from 1934.

In 1932, the Crossley company had introduced a light car, the Crossley Ten. This was an assembled vehicle powered by an 1100cc Coventry-Climax engine with overhead inlet valves. It was too heavy (a drawback compounded by the pre-selector gearbox), it was very low-geared and its brakes were mediocre. Another mistake was Crossley’s attempt to market the Burney rear-engined car with all-independent suspension. It was given a 15.7hp Crossley engine and a Wilson box, but it was too unconventional in appearance and handling. Very few were made. In 1935, Crossley introduced its new Regis range of small cars with handsome bodies styled by C.F. Beauvais. They consisted of the Crossley Ten and a new Crossley 1½-litre six of the same design also powered by Coventry-Climax, both with a new lowered frame. Both cars, together with the last Crossley 20.9s, disappeared after 1937.

Crossley assembled other people’s cars as well as making their own, beginning with the Willys-Overland Model 4 in 1920. The Gorton-produced Willys came to include more and more British-made parts, such as a Morris Oxford engine. A less likely diversion was an attempt of Crossley in 1921 to make the Type 22 Bugatti in England, but only a handful of these Crossley-Bugattis appeared. In 1922-1933 the Crossley factory made the AJS as well.

Source: Georgano, encyclopedia of motorcar; TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Singer

GB, 1905 – 1970

(1) Singer & Co Ltd, Coventry, Warwickshire, 1905 – 1936; Birmingham, 1927 – 1936

(2) Singer Motors Ltd, Coventry, Warwickshire, 1936 – 1956; Birmingham, 1936 – 1956

(3) Singer Motors Ltd, Ryton-on-Dunsmore, Warwickshire, 1956 – 1970

The Singer cycle firm acquired the manufacturing rights of the Perks and Birch motor wheel in 1901, and made front-wheel drive Singer tricycles as well as motor bicycles. These gave way to a line of conventional Singer tricars, which were still available as late as 1907 with water-cooling, wheel-steering and 6hp and 9hp engines. Car production started in 1905 with a 15hp 3-cylinder Singer car designed by Alex Craig, and made under licence from Lea-Francis. This Singer car had horizontal cylinders with overhead camshafts and 30in connecting-rods, and final drive was by chain. 2-cylinder versions Singer cars were also made, but the beginning of a new line Singer cars came with a conventional 2.4-litre 4-cylinder in 1906: an experimental 6-cylinder engine was exhibited in a Singer car, but not offered for sale. Only orthodox Singer cars with front vertical engines were listed in 1907, the smaller ones (a short-stroke 900cc twin Singer car, a 1.4-litre 3-cylinder, and a 1.8-litre 4-cylinder) having T-head White and Poppe power units, the larger fours Singer cars of 2.4-litres and 3.7-litres using Aster engines. Thereafter White and Poppe engines were standardized in Singer cars, and in 1909, when the Singer car company was reorganized, there was a 2.5-litre Singer sixteen with 3-speed gearbox and all brakes on the rear wheels, this Singer car selling for £380. L-head fours of 2.6-litres and 3.3-litres were introduced on Singer cars for 1911, in which year the biggest Singer car had worm drive, Sankey steel detachable wheels were featured, and the circular motif in the radiator core was discarded. The White and Poppe-powered Singer cars had quite a brisk performance, G.O. Herbert’s ‘Bunny Junior’ being capable of 3.000rpm, and wresting the Brooklands 16hp class records from Coatalen’s Sunbeam, while a modified 15hp Singer car with lengthened stroke and overhead inlet valves ran in the 1912 Coupe de l’Auto. This year saw the introduction of Singer cars first best-seller, the 1.100cc L-head Singer Ten with pair-cast cylinders and 3-speed gearbox in unit with the back axle. Though qualifying as a cyclecar in terms of weight, the Singer car was in fact one of the first modern baby cars, and sold for £185: Haywood’s tuned Singer car put 72 miles into the hour at Brooklands, and the fortunes of the Rootes brothers’ motor business were founded on the sale of this Singer car. The following year Singer cars own engines spread up the range with a new monobloc 2.4-litre fourteen, this Singer car was available with electric lighting, and fitted with Singer-made shock absorbers. By the outbreak of World War 1 only the big 20hp Singer cars retained the White and Poppe unit, and very few of these Singer cars were made. Singer motorcycle manufacture ceased in 1915, and the few Singer Tens being made to civilian account had a new rounded radiator and electric lighting. Singer Tens were also supplied to the Armed Forces during the war.

The first post-war 1 years saw for Singer cars a concentration on the 10hp model, now with full electrics, but otherwise little changed. A 60mph sports version Singer car cost £500 in 1920, and 33bhp was claimed from a racing Singer car which ran in the 1921 200 Mile Race. In 1922 the gearbox was placed amidships, and by 1923 the Singer car had been completely redesigned with an ohv monobloc engine and unit box. For one reason only (1923) a cheapened Singer car was offered under the Coventry-Premier name, this being a motorcycle and cyclecar concern which the Singer car company had acquired in 1921.

It was in 1921 that a trend towards a complicated Singer car range began which was to bring about the Singer car firm’s subsequent financial difficulties, though in 1928 Singer cars ranked third behind Morris and Austin among all-British private-car manufacturers. Their first production six Singer car was available in 1922, this Singer car being a long-stroke 2-litre with side valves, thermos-syphon cooling, magneto ignition, 3-forward speeds, spiral bevel final drive, and disc wheels, selling for £675. 4-wheel brakes were optional on this Singer car model in 1924, and had spread to the Singer Ten two years later, and a smaller 1.8-litre ohv power unit was introduced in a Singer car in 1927. Also in 1924 fabric bodies were listed for Singer cars, though curiously enough Singer cars avoided these during the late 1920s when fabric was fashionable. By 1927 also the Singer Ten had grown up into a 1.3-litre Subger Senior with plate clutch, and a new and very successful baby Singer car had come on the scene in the shape of the 848cc ohc Singer Junior, initially this Singer car was with 3-speed gearbox and brakes on the rear wheels only. The Singer car was a roomy four-seater with 4 doors, a 7ft 6in wheelbase, and a price of only £418.10s., and this Singer car was made until 1932, as well as being the ancestor of all Singer car models up to the Rootes takeover in 1956. 1928 brought the abandonement of cone clutches in Singer cars, the provision of 4-wheel brakes on the Singer Junior, and the introduction of an improved 42bhp 1.9-litre ohv six with a 7-bearing crankshaft. There was also a short vogue for fully convertible saloon Singer cars with wind-down roofs. 1930 Singer cars had wire wheels and coil ignition, but things became impossibly complicated for Singer cars in the 1931-1933 period, when the Singer car marque went in for ribbon radiator shells, not to mention the ‘Kaye Don’ six with waterfall-style radiator grille and twin carburetors, selling for £480. Eight models Singer cars were listed in 1932: the Singer Junior with 4 speeds and rear tank, a 972cc Singer Junior Special version destined to grow up into the Singer Nine, both Singer cars with overhead camshafts, a sv 1.3-litre 4-cylinder Singer Ten, and four 6-cylinder Singer cars ranging from a short-lived 1½-litre sv 12/6 at £235 up to the big ohv push-rod Singer Kaye Don. Hydraulic brakes were standardized on all Singer cars but the biggest six in 1933, when the first 972cc sports Singer Nine was introduced; these Singer cars challenged MG and did very well in reliability trials, which suited their rather low gearing. In standard form the Singer car offered 70mph and 5.300rpm for £185, though even the 4th place (and best-placed British car) by a Singer car in the 1937 TT failed to make up for the catastrophe of the 1935 race, when the whole Singer car team was eliminated by spectacular steering failures. This unfortunate affair also sounded the death-knell of an excellent 4-bearing 1½-litre sporting six Singer car introduced during 1933.

The permutations went on. Singer cars own ‘perm-mesh’ clutchless change came in 1934, in which year there was also a 1½-litre ohc Singer Eleven with independent front suspension and fluiddrive transmission at £245. This Singer car could be bought with a fullwidth aerodynamic saloon body known as the Airstream. All 1935 Singer cars had ohc engines, fluidrive and independent front suspension being applied also to the de luxe 9hp saloon Singer car and the 2-litre 6-cylinder Singer car model  at the top of the range. In 1936 there were six modelsof Singer cars, cheapest of which was the 9hp Bantam Singer car with 3-speed gearbox, electric pump feed and 12-volt electrics, looking very like the Morris 8, and competitively priced at £120 for open models. Enevitably another reorganization of the Singer car company followed, and more models. A 42bhp Singer Twelve with an engine of just over 1½-litres’ capacity sold for £225, this Singer car had an X-frame, and market a reversion to the beam front axle, but a similarly-powered sports model Singer car was almost stillborn, and after 1937 there were no more true sports Singer cars or 6-cylinder models. Instead, a 1.2-litre Singer Ten with the option 3 or 4 forward speeds was listed for 1938 at prices from £168.10s. up, and the Singer car company’s confidence in its ohc power units was reflected in the issue of a bore guarantee with the 1939 Singer cars. The Singer Nine (now of 1.074cc) reverted to mechanical brakes, and a semi-sports roadster style was offered as an alternative to the saloon Singer car on this chassis. 1.100cc and 1½-litre engines were supplied to HRG, who continued to use Singer car power units for the rest of their series-production career.

After World War 2 Singer car production was concentrated at the Birmingham works (opened in 1927), and Singer re-introduced their pre-war types. In 1948, however, the saloon Singer cars were replaced by a full-width, slab-sided 1½-litre model, the Singer SM 1500. This Singer car retained a separate chassis, and featured column change, hypoid final drive, and coil-spring independent front suspension. At £799 the Singer car was more expensive than its rivals, and sales of Singer cars slumped once the era of the seller’s market came to an end. Neither this nor the improved 1951 1½-litre roadster Singer car, also with independent front suspension, could compete against the big manufacturers. None of the Singer car company’s subsequent innovations – the option of twin-carburettor power units in 1953, experiments with a fiberglass-bodied roadster in 1954, or the Singer Hunter saloon of 1955 with conventional radiator grille, fiberglass bonnet to and (on paper, at any rate) a rather expensive twin-ohc engine as an alternative – could save the day for Singer cars. Early in 1956 Rootes Motors purchased Singer car company, and by the end of the year the Hunter had been replaced by a Hillman Minx-based Gazelle retaining Singer’s 52bhp ohc engine. Even this last vestige of the old days had been phased out of production by the end of 1958, and since then the name of Singer cars had been carried by de luxe variants of the basic Hillman types, acquiring such Hillman improvements as optional automatic transmission in 1960 and hypoid final drive in 1961.

At the beginning of 1970 the Singer car range consisted of the rear-engined ohc Chamois (Imp), and the 1.469cc Gazelle and 1.725cc Vogue, both members of the Arrow family corresponding to Hillman’s Minx and Hunter. All these disappeared soon afterwards as part of the rationalization the Chrysler Corporation imposed on the old Rootes Group.

US, 1915 – 1920

Singer Motor Co Inc, Mount Vernon, N. Y.

The Singer car was the successor to the Palmer-Singer car, which had been produced since 1906, and was one of the finest and most expensive luxury cars manufactured in America in its few years of existence. Distinguished by a sharply pointed radiator and a wide choice of custom bodies from leading coachbuilders, the Singer cars produced between 1915 and 1919 were powered by a Herschell-Spillman 6-cylinder engine. In 1920, the series HEH20 line of Singer cars was introduced. This series Singer cars, which proved to be the last, had a 12-cylinder Weidely engine. Prices on the last Singer cars were as high as $9.000. Wire wheel were standard on Singer cars.

Source: Georgano, encyclopedia of motorcar; MCS, KM

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com