The global magazine and marketplace for classic car enthusiasts, by enthusiasts.
The global magazine and marketplace for classic car enthusiasts, by enthusiasts.
Edward Lisle Sr’s Star Motor Co, an offshoot of the Star Cycle Co, produced its first Star car in 1898, and offered the Star car for sale in the following year. The Star car was a Benz-based machine, with a single-cylinder, water-cooled 3½hp engine, belt primary drive and chain final drive. It was an improvement in that water circulation on the Star car was assisted by a pump. In 1900 there followed a 2-cylinder Star car with 3 forward speeds, still on Benz lines. 1901 brougth De Dion-engined single-cylinder Star cars, and 1902 an 8hp twin of Panhard type in addition. Other, larger Star cars of Panhard ancestry joined the 8hp, up to a 20hp four Star car. By 1904, although a De Dion-powered single and Panhard-type twin were still there, the bigger machines were of Mercédès pattern, these Star cars came with honeycomb radiators, mechanically-operated inlet valves and pressed-steel frames. All veteran Star cars up to 1914 were extremely well-made, well-furnished, conventional, rather expensive cars lacking in technical originality, showing a line of development appearance in the 1907 range. The best-known Star car of the veteran period was the excellent 15hp Star car of 1909, a shaft-driven 2.8-litre four which had become the 3-litre 15.9hp by 1914. A great variety of other Star cars, basically similar models were turned out, not only by Star but also by the Star Cycle Co. The latter, run by Edward Lisle Jr, had made motor tricycles and bicycles, and produced the Starling car in 1905. It had 2 forward speeds and a De Dion single-cylinder engine, but was otherwise of Panhard type, with armoured wood frame and chain drive. One year later the Star car company supplemented it with the more modern Stuart car, which had 2-cylinders, 3-speeds and shaft drive. This name was dropped in 1908, all models being called Starlings, but these too, disappeared in 1909 when Star cars cheaper line was entrusted to the new Brion Motor Co, a more indepented concern that was still run by Edward Lisle Jr. So popular was the Star car that its makers were among the six largest in the country before 1914.
The 15.9hp Star car was continued after World War 1, together with another sv four Star car of pre-war origin, the 20hp Star car of 3.8-litres. A modern light Star car of fashionable type, the 11.9hp, arrived in 1921. This Star car used a 1.795cc sv engine with a detachable head, made in unit with a 3-speed gearbox which had central change. By 1924, the 11.9 Star car had grown up into the 2-litre 12/25hp Star car. It shared cylinder dimensions with the 18hp Star car, which was a new 3-litre six. The 12/25 Star car could be had as a very fine fast touring car with overhead valves and 54bhp, in which form the Star car was called 12/40hp. Thereafter, the Star car range reverted to its pre-war complexity. By 1927, there were three sv Star car models and two additional and more up-to-date Star cars with overhead valves. The 14/40hp Star car, new in 1926, was a solid 2-litre, ohv machine which in spite of having only 4-cylinders and 3 forward speeds, this Star car was a notably smooth and flexible car, thanks to a 5-bearing crankshaft. The ohv 20/60hp Star car, a 2½-litre six with the same bore and stroke as the 14/40 and a 7-bearing crankshaft, was the most luxurious Star car. A light six, the popular ohv 18/50hp, joined the Star car range in 1928, the year of the Star car company’s acquisition by Guy, and replaced the 14/40 Star car for 1929. By this time, the sv Star cars had gone, leaving the two sixes. As the 18hp Star Comet and the 21hp Star Planet, these Star cars were revised with handsome bodies and very full, luxurious equipment, including one-shot chassis lubrication, thermostatically-controlled radiator shutters and a built-in jacking system. Two other engines, of 14hp (2-litres) and 24hp (3.6-litres) were also obtainable in Star cars for 1932, as alternative Comet and Planet power units. These Star car were the last new Star cars, for they were too expensive to make, and the times favoured the mass-produced economy car. Production of Star cars ended in March 1932, but the unsold stock was sold by McKenzie and Denley of Birmingham, and the Star car was quoted in the Buyer’s Guide lists until 1935.
This Star car was driven by a single-cylinder, watercooled engine of 1.9-litres, mounted beneath the front seat, with false bonnet and coil radiator in front. A champion planetary transmission and double chain drive was used on this Star car. Both two- and five-seater Star cars were made, the latter with rear entrance.
Star runabouts were offered in three models, selling for $500, $600 and $700 respectively. The smallest Star car was an open two-seater, and shaft drive was employed on all Star cars.
The short-lived Star car from Peru was offered in conventional 2- and 4-cylinder forms. The twin was chain-driven, while the big, expensive four Star car ($4.000) had shaft drive.
William Crapo Durant’s Star Four was one of the most serious attempts to take away some of the Model T Ford’s market, for the cheapest practical car. Unlike the Ford, the Star car was an assembled machine.The Star car had a 2.2-litre, 4-cylinder engine by Continental, and was conventional in design in every way except the gearbox, which was separate; a feature common to all the vehicles in Durant’s empire, but very unusual in American mass-produced cars by the early 1920s. The touring Star car cost only $443 in 1923, which helped Star to be the seventh biggest seller in America that year. The Star car was sold outside the United States as the Rugby. In 1926, a 2.8-litre six Star car was introduced. Front wheel brakes appeared in 1927 but a year later the Star car make disappeared in the collapse of the Durant interests. By this time, 250 Star cars a day were being turned out. Only the Four was still called the Star car for the 1928 model year, as the Six was now known as the Durant Model 55.
Source: Georgano, encyclopedia of motorcar; TRN, GMN, MJWW, TRN
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com
Austria’s most famous motor car, the Austro-Daimler, was born when Daimler of Cannstatt established a factory in Vienna for the manufacture of about 100 of its Daimler cars annually. The Austro-Daimler was a copy of its German parent. In 1906 the Austro-Daimler concern became a separate financial entity, and a year earlier, Ferdinand Porsche had replaced Paul Daimler at Wiener-Neustadt as director. A new era began, for Porsche was a designer with original ideas. He did not exercise them at once; the two 1909 Austro-Daimler models for sale were large well-made fours with side valves in a T-head and a choice of chain or live-axle drive. World-wide fame came to the Austro-Daimler company with their 1910 models, especially the Austro-Daimler 22/80ps model originally designed to win the Prince Henry Tour of that year. It accomplished this very convincingly. The five large valves per cylinder – one inlet, four exhaust – were actuated by a single overhead camshaft. A combination of well-shaped combustion chambers and light reciprocating parts made for an engine of an efficiency never before seen in a catalogued, non-racing car. Its 5.7-litres produced 95bhp. Even Porsche, however, felt that so much power could not be safely transmitted by a live axle, and chain drive was used initially. The Austro-Daimler 22/80’s small brother, the Austro-Daimler 16/18ps, had a side-valve L-head engine. After it had swept the board in the Austrian Alpine Tour of 1911, the Austro-Daimler 16/25ps Alpine variant was also for sale. In 1914 the range consisted of these three cars, the sv Austro-Daimler 20/30ps, and the luxurious Austro-Daimler 35/60ps also with side valves. Both Austro-Daimler and Daimler sold the Lohner-Porsche, the name given to the electric and petrol-electric cars designed by Porsche before he went to Wiener-Neustadt. The Vienna Austro-Daimler firm was Austria’s largest manufacturer of motorcars.
Immediately after World War 1 a few cars were assembled in Liège from pre-war Austro-Daimler parts by M. Klinkenhammers, and sold under the Alfa-Legia. On their home ground the company returned to high-grade fast tourers. As well as the old ‘Austro-Daimler 16/18’ and ‘Austro-Daimler 20/30’, they made the new Austro-Daimler AD617 for sale, a 6-cylinder car of 4.4-litres with a single overhead camshaft, that was succeeded in 1923 by its development, the Austro-Daimler ADV17/60ps for sale, which was the same but for its front wheel brakes. Four years earlier, Porsche had maintained his reputation for really exciting design by producing the Sascha-type Austro-Daimler, a 1100cc – later 1½-litre – racing voiturette. Its four cylinders, like the six of the Austro-Daimler AD617, were of aluminium, with detachable steel liners. There were two overhead camshafts, however, and dry sump lubrication. The power output was 50bhp. Four-wheel brakes were, of course, fitted.
Although Porsche left Vienna in 1923 to return to Daimler, he was mainly responsible for the new ADM type, which was offered alongside the Austro-Daimler ADV17/60 from that year. The Austro-Daimler ADM1 was basically similar, but had a smaller engine of 2½-litres, and its rounded radiator was a departure for the hitherto traditional Austro-Daimler V-shape. It was sold in sports from in 1925 as the Austro-Daimler ADMII. After 1926, the old Austro-Daimler ADV17/60 was dropped and the ADM engine was enlarged to three litres by increasing the bore. This Austro-Daimler ADMIII in sports form developed 100bhp at 400rpm, and could do more than 100mph. Porsche’s successor, Karl Rabe, designed the even more advanced ADR type. Its tubular backbone chassis and swing-axle independent rear suspension so resembled that of the Tatra that legal action was taken against Austro-Daimler. The Austro-Daimler ADR was available in sports or normal form. At first, the Austro-Daimler ADR used the old ADMIII engine, but the Austro-Daimler ADR6 Bergmeister of 1929, one of the most glamorous Austro-Daimler built, had a new 3.6-litre power unit providing 120bhp. This car was made until production ceased shortly after the Steyr-Daimler-Puch amalgamation in 1934. The Austro-Daimler ADR8, the firm’s first and last 8-cylinder car, designed for more formal bodies, had disappeared in 1933 after a life of three years.
Source: Georgano, encyclopedia of motorcar; TRN
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

