Chalmers / Chalmers-Detroit

US, 1908 – 1924

Chalmers Motor Car Co, Detroit, Mich.

The Chalmers was one of the most popular automobiles made in the United States for more than a decade. The Chalmers was the successor to the Thomas-Detroit which was built by a company which had been founded in 1906 by E.R. Thomas (builder of the Thomas car in Buffalo, N.Y.), Roy D. Chapin and Howard Earle Coffin; the two latter had previously served at Oldsmobile. The Thomas-Detroit of which some 500 were sold during the first year of production, was marketed through the parent firm in Buffalo which manufactured a larger line of cars under the Thomas emblem. The Thomas-Detroit was a medium priced four-cylinder car which had been designed by Coffin. In 1907, Hugh Chalmers, vice president of the National Cash Register Co and a noted salesman, entered the firm. Shortly after, he bought a half of E.R. Thomas’ stock and became president of the company which became the Chalmers-Detroit Motor Company. The Thomas-Detroit became the Chalmers-Detroit in 1908 and in 1910, the Chalmers. Open and closed Chalmers models in two lines comprised the Chalmers four-cylinder cars, with self-starters appearing in 1912. Chalmers (as Chalmers-Detroit) had distinguished itself in road races as early as 1908 when W.R. Burns won the Motor Parkway Sweekstakes at Jericho, N.Y., averaging 48.7mph in the six-lap 140.76 mile run.

In 1913, the Chalmers brought out its first 6-cylinder model, as well as the four and apart from small mechanical and design changes, continued both until 1914. The Chalmers four was dropped from the 1915 line, however, and sixes were to be used exclusively in Chalmers until the ending of manufacture. By 1915, some 20.000 Chalmers cars per year were coming off the Chalmers production line and would even exceed that figure before the advent of World War 1. In 1917, an L-head motor replaced the earlier overhead-valve type and on August 4th, Chalmers again headed racing news when Joe Dawson won the 24-hour stock Car Endurance Run at Sheepshead Bay, N.Y. Sales flagged following the end of the war and Hugh Chalmers, always the salesman, and with the realization that a competitor, Maxwell, wasn’t faring well either, arranged to lease his Chalmers plants to Maxwell, using his salesmanship to promote the two concerns and getting the benefit of Maxwell tooling and manufacturing equipment. By the early 1920s, however, many makes of cars were in financial difficulties due to over-expansion and recession, and Walter P. Chrysler was called in to try and reorganize Maxwell. Chrysler was at this time planning his own corporation and in 1922 Chalmers was taken over by Maxwell which had become a Chrysler subsidiary. The last Chalmer cars for sale were equipped with Lockheed hydraulic brakes but 1923 was the last year of Chalmers production with some 9000 units leaving the factories. The Maxwell survived until 1925 when it became the Chrysler Four.

Source: Georgano, encyclopedia of motorcar; KM
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Stutz

US, 1911 – 1935

(1) Ideal Motor Car Co, Indianapolis, Ind., 1911 – 1913

(2) The Stutz Motor Car Co of America, Indianapolis, Ind., 1913 – 1935

The Ideal Motor Car Company was the name of the firm which made the first racing Stutz cars, but it was changed to the Stutz Motor Car Company in 1913. Harry C. Stutz’ most famous passenger Stutz car was the Stutz Bearcat speedster of 1914 – this Stutz car is probably the best known of all American sports cars. The Stutz car followed the usual recipe of a low-hung chassis, a big, slow-turning proprietary engine (in this case, a T-head, 4-cylinder Wisconsin unit, producing 60bhp at 1.500rpm), and very little else, just a bonnet, wings, raked steering column, two bucket seats, and a fuel tank behind them. A Stutz-made 3-speed gearbox was integral with the rear axle; an uncommon feature. This component had been sold by the Stutz car company before he made complete Stutz cars. A 6.2-litre 6-cylinder engine was available on the Stutz car, but seldom seen. The Stutz Bearcat was the most popular of its breed, in spite of its high price, and the appeal of the Stutz car was boosted by Stutz cars successes with ohc, 16-valve racing cars. The Stutz car was the Mercers’ greatest rival. Touring Stutz cars were made as well, but these Stutz cars were comparatively little known. Total production grew from 759 Stutz cars in 1913 to 2207 Stutz cars in 1917. Two years later, Stutz left to make another car, the HCS, although the cheaper Stutz cars of the 1915 period were also known as H.C.S. The gearbox was moved back on the Stutz car to the normal position in 1921, and shortly after this Stutz cars began making their own engines: an sv four giving 88bhp and a 75bhp ovh six. The latter was developed to give 80bhp in the 4.7-litre Speedway Six Stutz car of 1924, the last Stutz car of the old line.

In 1926, there was a change of management within the Stutz car company, and Frederick E. Moskovics, the new president, initiated a radiacally new Stutz car policy. Paul Bastien, who had designed the splendid 2-litre Métallurgique from Belgium, was responsible for the Stutz AA, or Vertical Eight Stutz car. This Stutz car was a beautifully-made fast tourer, more typical of Europe than America. Its specification embraced a straight-8 4.7-litre engine with a single overhead camshaft, and dual ignition, including two plugs per cylinder. Power output of this Stutz car was 92bhp at 3.000rpm. This was a modern, reasonably efficient engine by any standards, and the Stutz car was distinctly advanced in these respects by American standards. There were, however, only 3 forward speeds on the Stutz car. The hydraulic brakes were very good indeed, and the underslung worm final drive allowed the fitting of low-built, good-looking bodies on Stutz cars. Centralized chassis lubrication and safety glass were provided. Glamorous though the AA Stutz car was, the Stutz car was sold on the slogan of ‘The Safety Stutz’, and a year’s free passenger insurance was given with each Stutz car. In 1927, the engine of the Stutz car was enlarged to 4.9-litres, now giving 95bhp, and a speedster option, the Stutz Black Hawk, was added. In the following year, Weymann fabric body construction was adopted on Stutz cars; another European touch. The engine of the Stutz car was enlarged again in 1929 and this made 113bhp available. Better still, this Stutz car had 4-forward speeds. Special Stutz Black Hawk speedsters were 2nd at Le Mans in 1928, but the Stutz cars came no higher than 5th in 1929. These Stutz cars had Roots superchargers and vacuum servo brakes. This Stutz car was put on sale as the Stutz Bearcat, reviving a famous name. Stutz cars also competed at Le Mans in 1930, 1931 and 1932. Unfortunately, a Stutz car lost a well-publicized challenge match at Indianapolis with a Hispano-Suiza, and Frank Lockhart was killed at Daytona Beach while trying to take the World Land Speed Record with a Miller-engined car built by the Stutz car company, both setbacks taking place in 1928.

Sales of Stutz cars fell, and a range of cheaper Stutz carmodels with, it was hoped, wider appeal was introduced for the next year, alongside the existing Stutz car range. These Stutz cars had little in common with the classic models, so were called Black Hawks, not Stutz cars. One used a 6-cylinder, ohc engine of 4 litres’ capacity made by Stutz car company, and the other a straight-8 sv unit by Continental. At the other end of the scale, there appeared in 1931 the superb DV (dual valve) 32 Stutz car, to compete with the new multi-cylinder Stutz cars being brought out by Lincoln, Cadillac, Marmon, and others. The Stutz car design was basically similar to that of the SV16 Stutz car, still current, but there were two overhead camshafts and four valves per cylinder: 32 Stutz cars in all. The DV32 Stutz car was listed in speedster form, as the Stutz Bearcat, and, on the shorter chassis, as the Stutz Super Bearcat. These stubby, formidable Stutz cars were guaranteed to exceed 100mph. The expensive, high-quality, specialist Stutz went the way of most of its kind in the Depression years. Intead, the Stutz car company sold, and later made a light delivery van, called the Pak-Age car. This had a rear engine and all-independent suspension, and was current from 1928 to 1938, after which manufacture was taken over by Diamond T.

US, 1970 to date

Stutz Motor Car of America, New York, N.Y.

Unlike replica cars such as the Auburn and Cord, the makers of the Stutz Blackhawk coupé merely borrowed the name of the pre-war Stutz car for their machine. The Stutz car was powered by a 6½-litre Pontiac V8 engine stripped and modified so that the original output of 365bhp was raised to 425bhp. This was mounted in a modified Pontiac chassis, and the Virgil Exner-designed body was hand-built by Carrozzeria Padana of Modena, Italy, where the final assembly of the Stutz cars was done. The first Stutz car model, the 2-door hardtop, was priced at $22.500; a new Stutz car model for 1972 was a 4-door saloon using an long wheel base Cadillac chassis, and selling for $31.250.

Source: Georgano, encyclopedia of motorcar; TRN, GNG 

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com