Léon Bollee

France, 1895 – 1933

(1) Automobiles Léon Bollée, Le Mans, 1895 – 1924

(2) Morris Motors Ltd, Usines Léon Bollée, Le Mans, 1925 – 1931

(3) Sté Nouvelle Léon Bollée, Le Mans, 1931 – 1933

Leon Bollee was a son of Amédée Bolllée père, the most important pioneer of steam road vehicles in France. Leon Bollee, however, turned to really small petrol Leon Bollee cars. He was the first to do so, and therefore had to invent a new name for his Leon Bollee car of 1895 – he called it a Leon Bollee voiturette. This Leon Bollee car was a tandem two-seater 3-wheeler that was faster than any other petrol-engined vehicle on the road when the Leon Bollee car was working, thanks to a powerful 3hp engine and light weight, but the power unit was unreliable on the Leon Bollee car. The Leon Bollee car had a single air-cooled cylinder of 650cc and used hot-tube ignition. There were 3 forward speeds on the Leon Bollee car, with belt final drive. The frame was tubular. Four years after the Leon Bollee voiturette appeared, Leon Bollee superseded it with a 4-wheeler with independent front suspension by double transverse leaf springs. This Leon Bollee car had a single-cylinder, water-cooled engine. Unlike the Leon Bollee voiturette, this Leon Bollee car made no mark. The design rights were sold to Darracq, and around 1901 the name of Leon Bollee cars vanished. Meanwhile, the term voiturette had been taken up by the trade and public in general as the name for a small light car.

The Leon Bollee car reappeared in 1903 as an entirely normal, full-sized car in the more expensive class, backed by Vanderbilt money and designed for the American market. This Leon Bollee car was made in 28hp (4.6-litres) and 45hp (8-litres) versions, with four cylinders and chain drive, and led on to a 11.9-litre six Leon Bollee car in 1907, in which year the first shaft driven Leon Bollee car appeared. From 1909 there was also a small modern four, the Leon Bollee 10/14hp. The 1910 range embraced 9 Leon Bollee cars, including 2 of over 10-litres capacity. Electric lighting became available on Leon Bollee cars in 1913, but the Leon Bollee grew increasingly old-fashioned after World War 1 despite the introduction of ohv in 1922 on Leon Bollee cars and front wheel brakes in 1923. Late in 1924 Sir William Morris bought the Le Mans Leon Bollee car factory. From making a wide range of conservative French Leon Bollee fours, it turned to thinly-disguised products of Cowley, Oxford, the idea being to breach the French tariff walls from the inside. The first Morris- Leon Bollee had a 12CV 2½-litre 4-cylinder unit-construction engine made by Hotchkiss, the engine manufacturers controlled by Morris, but it had push-rod overhead valves and bore little evidence of its parentage. Not so the 18CV Morris- Leon Bollee car of 1928. This was a 3-litre straight-8 with single overhead camshaft that reflected Morris’ takeover of Wolseley two years earlier. Morris’ own new six of 1928 was mirrored in the 15CV 2.6-litre Le Mans product of 1929. The bodies for the Morris- Leon Bollee car were all made in France and were usually considerably more dashing and attractive than their British counterparts. Chassis of this Morris- Leon Bollee car were made in France, and all cars had a 4-speed gearbox. At one time, 50 12CV Morris- Leon Bollee cars were being turned out each week. However, Morris’ enterprise was not a success, and he discontinued it in the hard times of the Depression. A new syndicate was formed in September 1931 to sell the same range of cars under the name of Leon Bollee cars. This lasted for less than two years and few Leon Bollee cars were made.

Source: Georgano, encyclopedia of motorcar; TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Stutz

US, 1911 – 1935

(1) Ideal Motor Car Co, Indianapolis, Ind., 1911 – 1913

(2) The Stutz Motor Car Co of America, Indianapolis, Ind., 1913 – 1935

The Ideal Motor Car Company was the name of the firm which made the first racing Stutz cars, but it was changed to the Stutz Motor Car Company in 1913. Harry C. Stutz’ most famous passenger Stutz car was the Stutz Bearcat speedster of 1914 – this Stutz car is probably the best known of all American sports cars. The Stutz car followed the usual recipe of a low-hung chassis, a big, slow-turning proprietary engine (in this case, a T-head, 4-cylinder Wisconsin unit, producing 60bhp at 1.500rpm), and very little else, just a bonnet, wings, raked steering column, two bucket seats, and a fuel tank behind them. A Stutz-made 3-speed gearbox was integral with the rear axle; an uncommon feature. This component had been sold by the Stutz car company before he made complete Stutz cars. A 6.2-litre 6-cylinder engine was available on the Stutz car, but seldom seen. The Stutz Bearcat was the most popular of its breed, in spite of its high price, and the appeal of the Stutz car was boosted by Stutz cars successes with ohc, 16-valve racing cars. The Stutz car was the Mercers’ greatest rival. Touring Stutz cars were made as well, but these Stutz cars were comparatively little known. Total production grew from 759 Stutz cars in 1913 to 2207 Stutz cars in 1917. Two years later, Stutz left to make another car, the HCS, although the cheaper Stutz cars of the 1915 period were also known as H.C.S. The gearbox was moved back on the Stutz car to the normal position in 1921, and shortly after this Stutz cars began making their own engines: an sv four giving 88bhp and a 75bhp ovh six. The latter was developed to give 80bhp in the 4.7-litre Speedway Six Stutz car of 1924, the last Stutz car of the old line.

In 1926, there was a change of management within the Stutz car company, and Frederick E. Moskovics, the new president, initiated a radiacally new Stutz car policy. Paul Bastien, who had designed the splendid 2-litre Métallurgique from Belgium, was responsible for the Stutz AA, or Vertical Eight Stutz car. This Stutz car was a beautifully-made fast tourer, more typical of Europe than America. Its specification embraced a straight-8 4.7-litre engine with a single overhead camshaft, and dual ignition, including two plugs per cylinder. Power output of this Stutz car was 92bhp at 3.000rpm. This was a modern, reasonably efficient engine by any standards, and the Stutz car was distinctly advanced in these respects by American standards. There were, however, only 3 forward speeds on the Stutz car. The hydraulic brakes were very good indeed, and the underslung worm final drive allowed the fitting of low-built, good-looking bodies on Stutz cars. Centralized chassis lubrication and safety glass were provided. Glamorous though the AA Stutz car was, the Stutz car was sold on the slogan of ‘The Safety Stutz’, and a year’s free passenger insurance was given with each Stutz car. In 1927, the engine of the Stutz car was enlarged to 4.9-litres, now giving 95bhp, and a speedster option, the Stutz Black Hawk, was added. In the following year, Weymann fabric body construction was adopted on Stutz cars; another European touch. The engine of the Stutz car was enlarged again in 1929 and this made 113bhp available. Better still, this Stutz car had 4-forward speeds. Special Stutz Black Hawk speedsters were 2nd at Le Mans in 1928, but the Stutz cars came no higher than 5th in 1929. These Stutz cars had Roots superchargers and vacuum servo brakes. This Stutz car was put on sale as the Stutz Bearcat, reviving a famous name. Stutz cars also competed at Le Mans in 1930, 1931 and 1932. Unfortunately, a Stutz car lost a well-publicized challenge match at Indianapolis with a Hispano-Suiza, and Frank Lockhart was killed at Daytona Beach while trying to take the World Land Speed Record with a Miller-engined car built by the Stutz car company, both setbacks taking place in 1928.

Sales of Stutz cars fell, and a range of cheaper Stutz carmodels with, it was hoped, wider appeal was introduced for the next year, alongside the existing Stutz car range. These Stutz cars had little in common with the classic models, so were called Black Hawks, not Stutz cars. One used a 6-cylinder, ohc engine of 4 litres’ capacity made by Stutz car company, and the other a straight-8 sv unit by Continental. At the other end of the scale, there appeared in 1931 the superb DV (dual valve) 32 Stutz car, to compete with the new multi-cylinder Stutz cars being brought out by Lincoln, Cadillac, Marmon, and others. The Stutz car design was basically similar to that of the SV16 Stutz car, still current, but there were two overhead camshafts and four valves per cylinder: 32 Stutz cars in all. The DV32 Stutz car was listed in speedster form, as the Stutz Bearcat, and, on the shorter chassis, as the Stutz Super Bearcat. These stubby, formidable Stutz cars were guaranteed to exceed 100mph. The expensive, high-quality, specialist Stutz went the way of most of its kind in the Depression years. Intead, the Stutz car company sold, and later made a light delivery van, called the Pak-Age car. This had a rear engine and all-independent suspension, and was current from 1928 to 1938, after which manufacture was taken over by Diamond T.

US, 1970 to date

Stutz Motor Car of America, New York, N.Y.

Unlike replica cars such as the Auburn and Cord, the makers of the Stutz Blackhawk coupé merely borrowed the name of the pre-war Stutz car for their machine. The Stutz car was powered by a 6½-litre Pontiac V8 engine stripped and modified so that the original output of 365bhp was raised to 425bhp. This was mounted in a modified Pontiac chassis, and the Virgil Exner-designed body was hand-built by Carrozzeria Padana of Modena, Italy, where the final assembly of the Stutz cars was done. The first Stutz car model, the 2-door hardtop, was priced at $22.500; a new Stutz car model for 1972 was a 4-door saloon using an long wheel base Cadillac chassis, and selling for $31.250.

Source: Georgano, encyclopedia of motorcar; TRN, GNG 

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com