Swift

GB, 1900 – 1931

(1) Swift Motor Co Ltd, Coventry, Warwickshire, 1900 – 1919

(2) Swift of Coventry Ltd, Coventry, Warwickshire, 1919 – 1931

Swift progressed from sewing-machines through bicycles, motor tricycles and quadricycles to cars. Their first Swift car was a voiturette with a tubular chassis, powered by an MMC single-cylinder engine of De Dion type, but with an original transmission system. There was direct drive on both the 2-forward speeds of the Swift car, provided by two rings of teeth on the crown wheel and two pinions. The design of the Swift car was unreliable, for the rear axle was unsprung and attached to a flexible chassis. This was soon dropped on the Swift car in favour of normal transmission, and the axle was sprung from 1903. These single-cylinder Swift cars, with various makers’ engines installed, were the only Swift car offerings until 1904, when an excellent Swift-made twin of 10hp was added. Bigger 3- and 4-cylinder Swift cars were made at the time, and in 1909 a short-lived single-cylinder 7hp Swift car, also sold by Austin was added, but most sales came from the 2-cylinder light Swift car. In 1912 this Swift car was replaced by a 7hp 2-cylinder cyclecar with shaft drive, made by the Swift Cycle Co Ltd. For 1914 the Swift Light Car, which Swift car was virtually the cyclecar with a pressed steel, in place of tubular, chassis, was offered by the Swift Motor Co Ltd. The Cycle Co made no further Swift cars, and the formation of Swift of Coventry in 1919 merged the two companies. An 1.100cc 4-cylinder Swift Ten replaced the 2-cylinder car in 1914. This Ten Swift car was continued after World War 1, with a new 2-litre Swift Twelve beside it. The latter Swift car had 4 forward speeds but was otherwise similar. After this, only 4-cylinder Swift cars were made, irrespective of current fashions. These Swift cars were immensely strong and simple, inefficient in terms of power output but not utility. The Swift Ten was redesigned on more modern lines in 1923. A slightly smaller engine with detachable head and coil ignition was made in unit on the Swift car with a 3-speed gearbox, though the model Swift car reverted to a magneto in 1925. As the 12/35hp Swift car, the Swift Twelve was brought up-to-date with the same features, becoming the 14/40hp Swift car in 1926. In the same year the Ten’s engine was enlarged to 1.200cc. Wire wheels were optional on Swift cars from 1927, and 4-speed gearboxes came in 1929. The 1930 Ten Swift car had a narrow ‘ribbon’ radiator shell, and was available with Swallow 2-door saloon coachwork as well as fabric saloon and tourer styles. This Swift car was supplemented in 1931 by the 8hp Cadet 2-door saloon which in its cheapest form the Swift car cost only £149. Swift cars could not compete with the mass-producers, however, and the Swift car make died shortly after.

CDN, 1911

Swift Motor Car Company of Canada Limited, Chatham, Ont.

One prototype Swift car, possibly based on the US Anhut, was produced by this Swift car firm of marine-engine builders.

Source: Georgano, encyclopedia of motorcar; TRN, HD

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Vulcan

GB, 1902 – 1928

(1) Vulcan Motor Manufacturing and Engineering Co Ltd, Southport, Lancs., 1902 – 1906

(2) Vulcan Motor and Engineering Co Ltd, Southport, Lancs., 1906 – 1928

The Vulcan car firm was better known for commercial vehicles. Private Vulcan cars stemmed from experiments conducted in the 1897-1899 period by the brothers Thomas and Joseph Hampson. A belt-driven single-cylinder voiturette Vulcan car with lateral radiators was shown in 1902, being replaced a year later by a 6hp Vulcan car with armoured wood frame, mechanically-operated inlet valves, and shaft drive. This Vulcan car was listed at only £105, and this Vulcan car was soon followed by a 10hp twin, also T-headed but with a steel frame, selling for £200. 4-cylinder Vulcan cars of 12 and 16hp, still modestly priced, were available in 1905, while the biggest 1906 Vulcan cars, with capacities of 3.1- and 5.2-litres, had gate change. No 2-cylinder Vulcan cars were catalogued after 1908, but a year previously Vulcan cars had joined the ranks of 6-cylinder manufacturers with a 4.8-litre T-headed machine featuring dual ignition and cone clutch, at £600 for a Vulcan car chassis. Unlike other makers, Vulcan cars retained their interest in this type, which Vulcan car had acquired a 4-speed box and had grown to 6-litres by 1908, and the 1909 Vulcan car range consisted of four 4-cylinder cars and the six, all shaft-driven and still with T-heads; the smallest Vulcan car, rated at 12hp, had a 3-speed gearbox and worm drive. A new 3.6-litre six Vulcan car with unit gearbox and worm drive followed in 1911, along with an L-head 2.4-litre fifteen. Worm drive was standardized on the 1912 Vulcan cars, when the bigger Vulcan cars had T-heads, and a 1.8-litre, 2-cylinder with an Aster engine was offered. All but the smallest Vulcan car had detachable wheels as standard in 1913, and by the outbreak of World War 1 the Vulcan car company was well established with a range of solidly-built Vulcan cars: a 2.4-litre 10/15, a 2.6-litre 15.9, and a 3-litre monobloc 15/20 Vulcan car at £375. All these Vulcan cars had L-heads and bull-nose radiators, though the similarly styled six retained the older Vulcan car configuration. A 1½-litre Vulcanette with a 3-speed rear-axle gearbox and full electrical equipment was announced for 1915 but the war intervened.

After 1918 the Vulcan car company concentrated increasingly on trucks, and a brief association with the Harper Bean Group (1919-1920) did no good to finances. Some odd experiments by Vulcan cars included a worm-drive 3½-litre V8 tourer Vulcan car intended to sell for £625 (1919), and two Vulcan cars in 1922 with Howard sleeve-valve engines, a big 3.6-litre sports-touring four Vulcan car and a 10hp 1.4-litre flat-twin listed at £315. However, none of these Vulcan cars reached the public, the regular Vulcan car lines being a 1.8-litre ohv 12 and a 2.6-litre sv 16/20, both with Dorman engines. There was also a conservative 20hp Vulcan carmodel with the Vulcan car company’s own 3.3-litre sv fixed-head engine and 4-speed separate gearbox, this Vulcan car was selling for £850 in 1921; by this time flat radiators were again being used on Vulcan cars. The Vulcan 20 was available to military order with full wireless equipment in 1923, in which year C.B. Wardman effected a liaison of Vulcan cars and Lea-Francis. The two companies pooled their dealer network, Vulcan cars became responsible for certain Lea-Francis power units and bodies, and Lea-Francis made gear and steering boxes for Vulcan cars. A 1½-litre sv Dorman-engined Vulcan 12 was listed at £295 in 1925, followed a year later by an ohv worm-driven derivative, also with Dorman engine, and looking very like a Lea-Francis. 4-wheel brakes were available on Vulcan cars in 1925 and standardized in 1926. Last of the line Vulcan cars were the 14/40 and 16/60, with the disastrous twin ohc 6-cylinder engines of their own make. Short-chassis Vulcan cars were worm-driven, but bevel drive was adopted for long-chassis versions. Vulcan cars wore artillery wheels, but were otherwise identical to their Lea-Francis counterparts which Vulcan cars were made alongside them at Southport. Not many of these Vulcan cars were made, and after 1928 only commercial vehicles were produced. The Vulcan car firm subsequently amalgamated with Tilling-Stevens and thus were abrorbed into the Rootes Group after World War 2. Truck production ceased in 1953.

US, 1913 – 1914

(1) Vulcan Motor Car Co, Painesville, Ohio, 1913

(2) Vulcan Manufacturing Co, Painesville, Ohio, 1913 – 1914

This Vulcan car was a cleanly-designed light car with a 27hp 4-cylinder engine. A two-seater speedster Vulcan car on an 8ft 9in wheelbase with electric lights sold for $750. A five-seater version of this Vulcan car with the same engine, but on a longer wheelbase, cost $850.

Source: Georgano, encyclopedia of motorcar; MCS, GMN    

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com