Star

GB, 1898 – 1932

Star/ Starling/ Stuart

(1) Star Motor Co, Wolverhampton, Staffs., 1898 – 1902

(2) Star Engineering Co, Wolverhampton, Staffs., 1902 – 1909

(3) Star Cycle Co, Wolverhampton, Staffs., 1905 – 1909

(4) Star Engineering Co Ltd, Wolverhampton, Staffs., 1909 – 1928

(5) Star Motor Co Ltd, Wolverhampton, Staffs., 1928 – 1932

Edward Lisle Sr’s Star Motor Co, an offshoot of the Star Cycle Co, produced its first Star car in 1898, and offered the Star car for sale in the following year. The Star car was a Benz-based machine, with a single-cylinder, water-cooled 3½hp engine, belt primary drive and chain final drive. It was an improvement in that water circulation on the Star car was assisted by a pump. In 1900 there followed a 2-cylinder Star car with 3 forward speeds, still on Benz lines. 1901 brougth De Dion-engined single-cylinder Star cars, and 1902 an 8hp twin of Panhard type in addition. Other, larger Star cars of Panhard ancestry joined the 8hp, up to a 20hp four Star car. By 1904, although a De Dion-powered single and Panhard-type twin were still there, the bigger machines were of Mercédès pattern, these Star cars came with honeycomb radiators, mechanically-operated inlet valves and pressed-steel frames. All veteran Star cars up to 1914 were extremely well-made, well-furnished, conventional, rather expensive cars lacking in technical originality, showing a line of development appearance in the 1907 range. The best-known Star car of the veteran period was the excellent 15hp Star car of 1909, a shaft-driven 2.8-litre four which had become the 3-litre 15.9hp by 1914. A great variety of other Star cars, basically similar models were turned out, not only by Star but also by the Star Cycle Co. The latter, run by Edward Lisle Jr, had made motor tricycles and bicycles, and produced the Starling car in 1905. It had 2 forward speeds and a De Dion single-cylinder engine, but was otherwise of Panhard type, with armoured wood frame and chain drive. One year later the Star car company supplemented it with the more modern Stuart car, which had 2-cylinders, 3-speeds and shaft drive. This name was dropped in 1908, all models being called Starlings, but these too, disappeared in 1909 when Star cars cheaper line was entrusted to the new Brion Motor Co, a more indepented concern that was still run by Edward Lisle Jr. So popular was the Star car that its makers were among the six largest in the country before 1914.

The 15.9hp Star car was continued after World War 1, together with another sv four Star car of pre-war origin, the 20hp Star car of 3.8-litres. A modern light Star car of fashionable type, the 11.9hp, arrived in 1921. This Star car used a 1.795cc sv engine with a detachable head, made in unit with a 3-speed gearbox which had central change. By 1924, the 11.9 Star car had grown up into the 2-litre 12/25hp Star car. It shared cylinder dimensions with the 18hp Star car, which was a new 3-litre six. The 12/25 Star car could be had as a very fine fast touring car with overhead valves and 54bhp, in which form the Star car was called 12/40hp. Thereafter, the Star car range reverted to its pre-war complexity. By 1927, there were three sv Star car models and two additional and more up-to-date Star cars with overhead valves. The 14/40hp Star car, new in 1926, was a solid 2-litre, ohv machine which in spite of having only 4-cylinders and 3 forward speeds, this Star car was a notably smooth and flexible car, thanks to a 5-bearing crankshaft. The ohv 20/60hp Star car, a 2½-litre six with the same bore and stroke as the 14/40 and a 7-bearing crankshaft, was the most luxurious Star car. A light six, the popular ohv 18/50hp, joined the Star car range in 1928, the year of the Star car company’s acquisition by Guy, and replaced the 14/40 Star car for 1929. By this time, the sv Star cars had gone, leaving the two sixes. As the 18hp Star Comet and the 21hp Star Planet, these Star cars were revised with handsome bodies and very full, luxurious equipment, including one-shot chassis lubrication, thermostatically-controlled radiator shutters and a built-in jacking system. Two other engines, of 14hp (2-litres) and 24hp (3.6-litres) were also obtainable in Star cars for 1932, as alternative Comet and Planet power units. These Star car were the last new Star cars, for they were too expensive to make, and the times favoured the mass-produced economy car. Production of Star cars ended in March 1932, but the unsold stock was sold by McKenzie and Denley of Birmingham, and the Star car was quoted in the Buyer’s Guide lists until 1935.

US, 1903 – 1904

(1) Star Automobile Co, Cleveland, Ohio

(2) H.S. Moore, Cleveland, Ohio

This Star car was driven by a single-cylinder, watercooled engine of 1.9-litres, mounted beneath the front seat, with false bonnet and coil radiator in front. A champion planetary transmission and double chain drive was used on this Star car. Both two- and five-seater Star cars were made, the latter with rear entrance.

US, 1908

Star Automobile Co, Chicago, Ill.

Star runabouts were offered in three models, selling for $500, $600 and $700 respectively. The smallest Star car was an open two-seater, and shaft drive was employed on all Star cars.

US, 1908

Model Automobile Co, Peru, Ind.

The short-lived Star car from Peru was offered in conventional 2- and 4-cylinder forms. The twin was chain-driven, while the big, expensive four Star car ($4.000) had shaft drive.

US, 1922 – 1928

Durant Motor Co of New Jersey, Elizabeth, N.J.; Lansing, Mich; Oakland, Calif.

William Crapo Durant’s Star Four was one of the most serious attempts to take away some of the Model T Ford’s market, for the cheapest practical car. Unlike the Ford, the Star car was an assembled machine.The Star car had a 2.2-litre, 4-cylinder engine by Continental, and was conventional in design in every way except the gearbox, which was separate; a feature common to all the vehicles in Durant’s empire, but very unusual in American mass-produced cars by the early 1920s. The touring Star car cost only $443 in 1923, which helped Star to be the seventh biggest seller in America that year. The Star car was sold outside the United States as the Rugby. In 1926, a 2.8-litre six Star car was introduced. Front wheel brakes appeared in 1927 but a year later the Star car make disappeared in the collapse of the Durant interests. By this time, 250 Star cars a day were being turned out. Only the Four was still called the Star car for the 1928 model year, as the Six was now known as the Durant Model 55.

Source: Georgano, encyclopedia of motorcar; TRN, GMN, MJWW, TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Talbot

1903 – 1938

Clement-Talbot Ltd, North Kensington, London W.10

From 1903, Clement-Talbot Ltd, a company backed by the Earl of Shrewsbury and Talbot, began importing the French Clément car into Britain; in spite of its name and an interest held by Adolphe Clément, the concern was British, and by the end of the year its cars were called Talbot cars. The 1904 models Talbot cars were a 6hp single, and 11hp twin, and two big fours. All of the Talbot cars had shaft drive and side valves in T-heads, except for the biggest, the 27hp voiture de luxe Talbot car, which used overhead inlet valves and a single camshaft. Trucks, buses and boats were also advertised, next to Talbot cars. Promotion of the Talbot car, which was at first in the hands of the managing director, D.M. Weigel, was energetic and successful.
By the end of 1904, an impressive Talbot car factory had been built, complete with test track, and in the following year British-assembled, and partly British-made Talbot cars emerged from it. A wide variety of types Talbot cars was listed, from an 11hp twin to a great 50hp 4-cylinder Talbot car. One model that was to be famous, the 12/16hp Talbot car, had already been designed. French cars were still being imported by the Talbot car company. However, the 20hp Talbot car of 1906 was the first British-made Talbot car. It was designed by C.R. Garrard, and while still conventional, this Talbot car had an unusually efficient engine of 3.8 litres’ capacity. Both this and the 2.7-litre ‘12/16’ Talbot car were fast cars that quickly made a name for themselves in competitions; the slogan for the Talbot cars became ‘The Invincible Talbot’. For 1907 a 3-litre 15hp, a Talbot car in the same mould, superseded the ‘12/16’. By 1908 this Talbot car was the only British chassis offered, into which could be installed 15hp, 25hp or 35hp engines. The Talbot car popularity was due to a combination of smoothness, reliability, speed and reasonable price. The French range Talbot cars was still listed. A six was introduced for 1910, and the 4½-litre 25hp was revised by G.W.A. Brown with an L-head valve arrangement. This model Talbot car, highly tuned and lightened, and fitted with a racing body, became the first car to cover 100 miles in an hour, at Brooklands in 1913 in the hands of Percy Lambert. In the same year a new model Talbot car, the 2.6-litre 15/20hp, was introduced. This Talbot car and the 25hp, now called the ‘25/50’, were the famous cars that kept the Talbot car name before the public eye in competitions. A sports model Talbot car of the latter was also listed. By this time, the French range Talbot cars had been dropped.

In 1919 Clement-Talbot was taken over by another French-sounding, but in fact British-owned firm, the Société Alexandre Darracq of Paris. Darracq proceeded to acquire Sunbeam as well, but private Talbot car policy was at first unaffected. The 25/50hp and 15/20hp Talbot cars were continued. For 1922, however, the new 1-litre Darracq light car was offered as the 8/18hp Talbot car. In the Talbot tradition, this Talbot car was a solid car with above-average performance and handling. The push-rod overhead valve engine had coil ignition, there were only two seats in the Talbot car, there was no differential, and suspension was by quarter-elliptic springs all round. Both acceleration and brakes of the Talbot car were excellent; in other words, this Talbot car was a light car more typical in France than of England. Georges Roesch, who had been Chief Engineer since 1916 and had already devised the Talbot 12hp of 1919, a Talbot car which was never put on the market, quickly revised the ‘8/18’ Talbot car as the 10/23hp, which was more ‘English’ in that the Talbot car had a long, wide, roomy body, and a differential, with an enlarged bore and 1100cc to cope with the added weight.
From 1923 to 1926, the Talbot car company tried to exist on the ‘10/23’ Talbot car and a series of obscure small sixes of which few Talbot cars were made. The pre-war big four Talbot cars had been dropped, but nothing as popular had been found. Clement-Talbot cars were at a very low ebb when Georges Roesch saved them with a one-model policy, based on a small six of the type just becoming fashionable. However, the 14/45hp Talbot car was better than the rest because the Talbot car combined efficiency and high quality with comfort, roominess and smoothness. Considering all this, the price of the Talbot car was not high. It was, in fact, Roesch’s intention to provide the characteristics of the Rolls-Royce 20hp to the Talbot car but with half the engine size, weight and price. The cubic capacity was only 1665cc (61x95mm). The reciprocating parts, including the overhead valves, were very light, and the compression ratio was notably high, enabling revolutions and power output to be high also. Even so, the engine of the Talbot car was an unusual combination of silence and flexibility. The brakes were excellent, though it was suprising to find only quarter-elliptic springs at the rear of the Talbot car. The car’s main drawback was weight: bodies of these Talbot cars were very spacious, mounted on a deep, stiff but heavy frame with a long wheelbase. However, most Talbot car customers did not want ultra-high performance; the 60-65mph of the ‘14/45’ Talbot car was very good for such a large car with so small an engine.

The Talbot car company’s crisis had allowed no time for development, so the new Talbot car came straight off the drawing board to the public; but the Talbot car was so good in design that there were no major snags, and the Talbot car firm sold all they could make. The engine of the Talbot car was very difficult to work on without garage equipment, but the ‘14/45’ Talbot car was designed for replacement rather than repair of parts: another very modern, if not entirely desirable, feature. The design was obviously capable of great development, and during 1930 the first stages were announced – the Talbot 75 and 90. Both Talbot cars had the same size of engine; the ‘14/45’ Talbot car with an enlarged bore, providing 2¼ litres. The ‘75’ Talbot car was a touring model available alongside the ‘14/45’ to those who wanted a little more performance, while the ‘Talbot AM90’ was a more highly-tuned sports Talbot car, giving over 80mph with the same refinement. This Talbot car was sold in closed as well as open form, but the most handsome body was the standard sports tourer. Additionally, a cheaper Light Six 14/45 Talbot car with a shorter chassis was added at the lower end of the range.
With the ‘Talbot AM90’ began Talbot cars second lease of life as a distinguished sporting make. Third and fourth places in the Le Mans 24 Hour Race were followed by class wins of Talbot cars in the Irish Grand Prix, the Ulster Tourist Trophy Race and the Brooklands 500 Miles Race. In spring 1931 the Talbot 105 was introduced with a new, 75x112mm engine providing 3-litres. To improve the breathing, the valves were in a staggered arrangement instead of bing in line as hitherto. All types of body, from saloon to four-seater sports, were offered on this Talbot car chassis. The last Talbot car was a 100mph machine. The bigger engine of the Talbot car was difficult to start, in spite of assistance from two 12-volt batteries, for the starter was not geared down. It was no help when the optional Wilson self-changing gearbox was fitted from 1933. In competitions, the Talbot car name went from strength to strength. The ‘Talbot 105’ came 3rd in the Irish Grand Prix and at Le Mans, 4th in the Tourist Trophy and 2nd in the 500 Miles Race. A 105 tourer Talbot car took home a Coupe des Glaciers after a fault-free performance in the Alpine Trial. The Coupe des Alpes team prize was won in 1932 by Talbot 105s, and in that year came a 2nd place in the Brooklands 1000 Miles Race (which replaced the Double Twelve), and 3rd place at Le Mans and in the 500 Miles Race with a Talbot car.
These racing successes were won by Talbot cars prepared by Fox & Nicholl Ltd with works support; in spite of the fame and success of the Talbot car, the Sunbeam-Talbot-Darracq group had been in financial trouble since 1930 and earlier, and racing was a luxury. At the end of 1932, however, Fox & Nicholl’s participation was discontinued and the great run of triumphs for Talbot cars ended. The normal production Talbot cars continued to do well. In 1932 the Talbot 65, a new model basically the same as the ‘14/45’, was announced. The ‘Talbot 95’, consisting of the ‘Talbot 105’ engine in a longer wheelbase for more sedate use, was introduced for 1933. In the following year Talbot cars with the self-changing gearbox were given a centrifugal clutch to avoid drag, and for 1935 there appeared the last developments of the standard type Talbot car, the ‘Talbot 110’. This superb Talbot car had a larger bore than the 105, giving 3½-litres. Early in 1935, however, Rootes gained control of Clement-Talbot. The ‘Talbot 65’ was dropped for 1936 in favour of the Rootes Talbot Ten, a Hillman Minx-based design, and by 1938 the last Roesch survivor, the ‘Talbot 110’ was gone.

Source: Georgano, encyclopedia of motorcar; TRN
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com