Crossley

GB, 1904 – 1937

(1) Crossley Brothers Ltd, Gorton, Manchester, 1904 – 1910

(2) Crossley Motors Ltd, Gorton, Manchester, 1910 – 1937

The name of Crossley was famous on engines before it was famous on cars; in fact the Crossley company was the first in Britain to make 4-stroke internal combustion engines on the Otto principle. Later, Daimler engines were made under licence. The first Crossley car for sale, a chain-driven 22hp 4-cylinder, appeared for the 1904 season. A Crossley 28hp and Crossley 40hp followed, all three cars being of normal design and foreign inspiration. Their designer was J.S. Critchley, formerly of Daimler. Shaft drive appeared in 1906, and late in 1909, some were fitted with Allen-Liveredge front-wheel brakes, but Crossley cars, though excellent machines, made little impression until after 1910. The 4-litre 20hp Crossley which then made its bow was a well-constructed, durable and very popular car. Designed by A.W. Reeves, it lived on in modified form until 1925. Crossley’s finest hour came in World War 1, when, as the Crossley 20/25hp it achieved fame as a staff car in the Royal Flying Corps, and as an ambulance and light truck. The Crossley model was extremely popular with the British Royal Family after the war in its 25/30hp version. In its early years, however, it was rivalled by the 15hp. The efficiency of the latter’s  otherwise conventional engine, a side-valve four like the rest, gave this Crossley a better performance than most cars in its class and encouraged the makers to offer a special sporting variant, the Crossley Shelsley.

The Crossley Fifteen was discontinued after 1914, but a new Crossley arrived for 1921. This Crossley 19.6hp was a rather more modern design, having a detachable cylinder head, and it was cheaper and lighter on fuel than its 25/30hp companion. The performance was about the same. It was also made in sporting form as the Crossley 20/70hp, but this model was heavy, like the ’Crossley 19.6’ itself, and the brakes were not good enough for the 75mph that was available. Crossley did not make a serious attempt to invade the middle-class market until 1923, when the Crossley 12/14hp, later called the Crossley Fourteen, was introduced. Like its brothers, this was a simple side-valve four, in this case of 2.4 litres, but was more modern, with its unit construction of engine and gearbox and central gear-change. The Crossley Fourteen was a very successful model, being flexile and, thanks to its light weight, both roomy and economical. It survived until 1927. By this time the two bigger Crossley cars were giving way to a much more up-to-date car; the Crossley company’s first six and its first overhead-valve machine. This Crossley 18/50hp model was a spacious, heavy 2.6-litre car with good brakes but somewhat lacking in power. Its engine was enlarged to 3.2-litres and 20.9hp for 1928. At the same time a new small Crossley of similar design, the 2-litre Crossley 15.7hp was introduced, to which a sporting alternative reviving the Shelsley name was  added in 1929. Lagonda’s 16/80 model used this engine later. The 6-cylinder Crossley 15.7hp continued until 1934 and the Crossley 20.9hp until 1937. Wilson pre-selector gearboxes were fitted from 1934.

In 1932, the Crossley company had introduced a light car, the Crossley Ten. This was an assembled vehicle powered by an 1100cc Coventry-Climax engine with overhead inlet valves. It was too heavy (a drawback compounded by the pre-selector gearbox), it was very low-geared and its brakes were mediocre. Another mistake was Crossley’s attempt to market the Burney rear-engined car with all-independent suspension. It was given a 15.7hp Crossley engine and a Wilson box, but it was too unconventional in appearance and handling. Very few were made. In 1935, Crossley introduced its new Regis range of small cars with handsome bodies styled by C.F. Beauvais. They consisted of the Crossley Ten and a new Crossley 1½-litre six of the same design also powered by Coventry-Climax, both with a new lowered frame. Both cars, together with the last Crossley 20.9s, disappeared after 1937.

Crossley assembled other people’s cars as well as making their own, beginning with the Willys-Overland Model 4 in 1920. The Gorton-produced Willys came to include more and more British-made parts, such as a Morris Oxford engine. A less likely diversion was an attempt of Crossley in 1921 to make the Type 22 Bugatti in England, but only a handful of these Crossley-Bugattis appeared. In 1922-1933 the Crossley factory made the AJS as well.

Source: Georgano, encyclopedia of motorcar; TRN

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com

Triumph

US, 1900 – 1901

Triumph Motor Vehicle Co, Chicago, Ill.

The Triumph car company made an electric Stanhope known as the Ellis, and announced that they would accept orders for petrol or steam Triumph cars, for delivery in 90 days.

US, 1906 – 1909

Triumph Motor Car Co, Chicago, Ill.

These Triumph cars were open cars in four- and five-seater models. The engines of the Triumph cars were 4-cylinder units of 30hp and 45hp. In 1907 this Triumph car used ‘the only self-contained, automatic, self-starting motor in the world’. The starting method of the Triumph car stored exhaust gases in a tank under the seat, at a pressure of 125psi. This gas could be bled back into the cylinders for starting.

GB, 1923 to date

(1) Triumph Cycle Co Ltd, Coventry, Warwickshire, 1923 – 1929

(2) Triumph Motor Co Ltd, Coventry, Warwickshire, 1930 to date

This famous motor-cycle factory Triumph made a tricar in 1903, but 4-wheeler Triumph cars were not offered until 1923, when a 1.4-litre sv 4-cylinder 10/20 Triumph car with a Ricardo-designed engine and 4-speed gearbox was listed at £430; production of Triumph cars was undertaken in the factory formerly occupied by Dawson. This gave way in 1925 to a 1.9-litre 13/30 Triumph car at £495, the first British car to have Lockheed contracting-type hydraulic brakes. Neither this Triumph car nor its 15hp successor made much impression, but in 1928 Triumph car company introduced the 832cc sv Triumph Super 7, with unit gearbox, hydraulic brakes, and worm final drive, which Triumph car sold well both at home and overseas. There was a supercharged sports version Triumph car listed at £250 in 1929-1930, and the manufacture of small family saloon Triumph cars of superior quality was pursued until 1933-1934. Ribbon-type radiators were featured on Triumph cars in 1930, and in 1931 came a 1.2-litre small six Triumph car, the Triumph Scorpion, really a Super 7 Triumph car with 2 extra cylinders, and endowed with very low gearing. Ioe Coventry-Climax power units made their appearance in the Triumph Super 9 of 1932, when Triumph car saloons had pillarless doors, and 4-speed gearboxes were adopted. The bigger 1933 models Triumph cars had electric fuel pumps, and during the season a 1.122cc ioe Triumph Ten joined the Triumph car range at £225.

Though these family models Triumph car were still being made in 1934, there were also the more sporting Triumph Glorias with 1.100cc 4-cylinder and 1½-litre 6-cylinder ioe power units, cruciform-braced frames, and free wheels, which in open form could exceed 70mph: one of these Triumph cars, driven by Donald Healey (responsible for the design of 1936 – 1939 Triumph cars) won the light-car class of the 1934 Monte Carlo Rally. An abortive and very Alfa Romeo-like 2-litre twin-ohc supercharged straight-8 Triumph car was listed at £1.225 in 1935, but that year’s Gloria-Vitesse models  were far more successful, especially in 2-litre, 6-cylinder form. Metallic finish was available on Triumph cars, and the saloon models Triumph cars were sold with screenwashers as standard equipment.

In 1936 the Triumph car and motorcycle businesses were divorced, and from 1937 onwards the Triumph cars became heavier; synchromesh was adopted, Triumph-built engines with full overhead valves supplanted the ioe Coventry-Climax units, and Triumph cars ranged from a 1½-litre, 4-cylinder Triumph Gloria saloon at £288 up to the 1.8-litre 4-cylinder and 2-litre 6-cylinder Triumph Dolomites, with ugly fencer’s mask radiator grilles at £348 and £368 respectively.

The Triumph Dolomites were comprehensively equipped, with centralized chassis lubrication and radio as an factory extra, and the handsome if rather American looking roadster coupés Triumph cars of 1938-1940 were regular concours winners.

From the summer of 1938 only Triumph Dolomites were catalogued, the smallest Triumph car model being a compact 1½-litre Triumph car (actually 1.767cc) on a 9ft wheelbase at £313, but during 1939 a conventionally-styled 12hp sports saloon Triumph car appeared at £285. Only 50 Triumph cars were made since Triumph went into receivership just before World War 2, and when the Triumph cars reappeared after VJ Day they were products of Standard, the new 1800 Triumph car having the 65bhp 1.8-litre ohv 4-cylinder unit made for the 1½-litre Jaguar. Other features of these Triumph cars were Girling brakes, and an unusual right-hand column change for the 4-speed gearbox. Both the roadster at £799 and the saloon at £831 were traditionally styled, the latter Triumph car having a razor-edge body of the type favoured by British specialist coachbuilders in the later 1930s.

By 1949, 2.1-litre Standard Vanguard engines and 3-speed gearboxes had been adopted on Triumph cars, and 1950 brought a curious little razor-edged 2-door saloon, the Triumph Mayflower, with a 10hp sv engine, which Triumph car persisted until 1953.

In that year the first of a successful line of sports Triumph cars appeared, descended from an abortive 1950 design with retractable headlamps, fully aerodynamic bodywork with power top, and overdrive gearbox, which had been a casualty of the Korean War. The new Triumph TR2 weighed only 1.888lb, had a 2-litre, 90bhp development of the Vanguard engine, independent coil-and-wishbone front suspension, 2LS Lockheed brakes, hypoid final drive, and the useful combination of over 100mph and 25mpg in regular service. The Triumph car distinguished itself in competition, early successes including an outright win in the 1954 RAC Rally and the team award in the 1956 Alpine Rally, as well as being an outstanding dollar-earner. The Triumph TR3, its successor, acquired front disc brakes in 1956, and this Triumph car was made until 1962. The power unit of Triumph cars was adopted by Morgan (1954), Swallow Doretti (1954), Peerless (1958), and its successor Warwick (1960).

After the discontinuation of the razor-edged 2.1-litre Renown saloon early in 1955, the TR was the staple Triumph car until mid-1959, when the Triumph Herald saloon appeared, using a development of the 948cc Standard 10 engine in a separate chassis. This Triumph car had all-round independent suspension (the first small British family saloon to be so equipped), a collapsible steering wheel, and Michelotti styling. The Triumph car could be bought in 38bhp single carburetor and 50bhp twin-carburettor versions for prices starting at £702. This model Triumph car did not really prosper until Standard-Triumph cars was taken over by Leyland in 1961, when a more powerful 1.147cc development Triumph car with the option of front disc brakes appeared, followed two years later by the 12/50 with disc brakes as standard, and a sunshine roof. A 1.6-litre 6-cylinder Triumph car with four headlamps, the Triumph Vitesse came in 1962, and the Triumph Spitfire sports two-seater was a further Herald derivative announced for 1963. 4-cylinder Triumph car engines are used by Amphicar, Bond, and Fairthorpe.

In 1962 the Triumph TR4 with restyled bodywork, a 2.1-litre engine, rack-and-pinion steering, and all-synchromesh box, was introduced, acquiring independent rear suspension as the Triumph TR4A in 1965, while the Triumph car features were also incorporated in a 90bhp 2-litre 6-cylinder saloon Triumph car, the Triumph 2000, which was a successful introduction in 1964. Triumph’s new car in 1966 was the 1300 Triumph car, still with all-synchromesh gearbox, all-round independent suspension, and front disc brakes, but this Triumph car also featuring front-wheel drive and a 61hp development of the basic Herald engine. 1967 Triumph Vitesses had the 2-litre engine, also used in the new GT6 hardtop coupé, a Spitfire derivative. A Triumph TR5 sports car, with a 2½-litre 6-cylinder fuel injection engine at last replacing the tough old Vanguard unit and a 75bhp TC version of the 1300 saloon, were introduced in 1968. It was also announced that sohc 4-cylinder engines of Triumph cars were being manufactured for SAAB’s new 99 model, though all the new 1969 Triumph cars retained push-rod engines. These included revised versions of the GT6 and Vitesse with wishbone rear suspension, and a more expensive companion for the 2000 Triumph car, the 2.5 PI using a detuned Triumph TR6 fuel-injection unit; this Triumph car was rallied by the works, the Culcheth and Syer car coming 2nd in the 1970 World Cup event. In 1970 Triumph cars introduced the Triumph Stag, a luxury sporting 2+2 powered by a 3-litre dohc V8 engine of their own design developing 145bhp. This Triumph car featured alternator ignition, a choice of synchromesh and overdrive or automatic transmission, all-independent springing, power-assisted rack and pinion steering, and vacuum servo brakes with discs at the front. A big and heavy Triumph car weighing 3.020lb, this Triumph car carried semi-convertible coachwork with built-in rollbar.

In the 1971 range of Triumph cars was a Herald replacement, the Triumph Toledo 2-door saloon. This Triumph car combined the 1300 structure with the 1.296cc Herald 13/60 engine driving the rear wheels. Rear suspension was by live axle and coils, and all-drum brakes were standard, though front disc brakes, four doors and a 1.500cc engine were used on an export-only model. The Triumph 1300 was replaced by a more powerful 1500, and in August 1971 4-door Triumph Toledos in basic form reached the home market. That summer the Herald/ Vitesse range of Triumph cars was finally phased out (apart from Indian production of ‘Standard’ Heralds) and after many delays Triumph cars medium-sized luxury Triumph Dolomite was finally launched at the beginning of 1972. This Triumph car followed Toledo lines with front disc brakes, but the Triumph car was powered by a 91bhp twin-carburettor edition of the 1.854cc ohc engine as supplied to SAAB. Principal 1973 improvements were the standardization of front disc brakes on the Toledo, and of overdrive on manual versions of the 2.5 PI and Stag.

D, 1933

Triumph Werke AG, Nuremberg

This well-known motorcycle manufacturer built a few 3-wheeled coupés Triumph cars powered by 350cc engines driving the single rear wheels.

Source: Georgano, encyclopedia of motorcar; GNG, GMN, MCS 

The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com