The global magazine and marketplace for classic car enthusiasts, by enthusiasts.
The global magazine and marketplace for classic car enthusiasts, by enthusiasts.

Leon Bollee was a son of Amédée Bolllée père, the most important pioneer of steam road vehicles in France. Leon Bollee, however, turned to really small petrol Leon Bollee cars. He was the first to do so, and therefore had to invent a new name for his Leon Bollee car of 1895 – he called it a Leon Bollee voiturette. This Leon Bollee car was a tandem two-seater 3-wheeler that was faster than any other petrol-engined vehicle on the road when the Leon Bollee car was working, thanks to a powerful 3hp engine and light weight, but the power unit was unreliable on the Leon Bollee car. The Leon Bollee car had a single air-cooled cylinder of 650cc and used hot-tube ignition. There were 3 forward speeds on the Leon Bollee car, with belt final drive. The frame was tubular. Four years after the Leon Bollee voiturette appeared, Leon Bollee superseded it with a 4-wheeler with independent front suspension by double transverse leaf springs. This Leon Bollee car had a single-cylinder, water-cooled engine. Unlike the Leon Bollee voiturette, this Leon Bollee car made no mark. The design rights were sold to Darracq, and around 1901 the name of Leon Bollee cars vanished. Meanwhile, the term voiturette had been taken up by the trade and public in general as the name for a small light car.
The Leon Bollee car reappeared in 1903 as an entirely normal, full-sized car in the more expensive class, backed by Vanderbilt money and designed for the American market. This Leon Bollee car was made in 28hp (4.6-litres) and 45hp (8-litres) versions, with four cylinders and chain drive, and led on to a 11.9-litre six Leon Bollee car in 1907, in which year the first shaft driven Leon Bollee car appeared. From 1909 there was also a small modern four, the Leon Bollee 10/14hp. The 1910 range embraced 9 Leon Bollee cars, including 2 of over 10-litres capacity. Electric lighting became available on Leon Bollee cars in 1913, but the Leon Bollee grew increasingly old-fashioned after World War 1 despite the introduction of ohv in 1922 on Leon Bollee cars and front wheel brakes in 1923. Late in 1924 Sir William Morris bought the Le Mans Leon Bollee car factory. From making a wide range of conservative French Leon Bollee fours, it turned to thinly-disguised products of Cowley, Oxford, the idea being to breach the French tariff walls from the inside. The first Morris- Leon Bollee had a 12CV 2½-litre 4-cylinder unit-construction engine made by Hotchkiss, the engine manufacturers controlled by Morris, but it had push-rod overhead valves and bore little evidence of its parentage. Not so the 18CV Morris- Leon Bollee car of 1928. This was a 3-litre straight-8 with single overhead camshaft that reflected Morris’ takeover of Wolseley two years earlier. Morris’ own new six of 1928 was mirrored in the 15CV 2.6-litre Le Mans product of 1929. The bodies for the Morris- Leon Bollee car were all made in France and were usually considerably more dashing and attractive than their British counterparts. Chassis of this Morris- Leon Bollee car were made in France, and all cars had a 4-speed gearbox. At one time, 50 12CV Morris- Leon Bollee cars were being turned out each week. However, Morris’ enterprise was not a success, and he discontinued it in the hard times of the Depression. A new syndicate was formed in September 1931 to sell the same range of cars under the name of Leon Bollee cars. This lasted for less than two years and few Leon Bollee cars were made.
Source: Georgano, encyclopedia of motorcar; TRN
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com
The Wanderer firm – like many others – started with bicycle manufacture; motor cycles followed and led the way to Wanderer cars. Extensive experiments with Wanderer cars were undertaken. In 1905 the 2-cylinder Wanderermobil was ready, but this Wanderer car remained a prototype. Another Wanderer car – which is still in existence – is claimed to date from 1904.
It is reported by some sources that Ettore Bugatti offered a small car design to Wanderer in 1910 before starting manufacturing on his own. But Wanderer cars did not take over the Bugatti car, as their own Wanderer car designs were ready and they started production of these Wanderer cars in 1911. Their first production Wanderer car had a 4-cylinder 1.150cc, 5/12PS engine and a two-seater tandem body. This Wanderer car was popularly known as the Püppchen (doll). Engine capacity was increased to 1.220cc in 1914 and the output raised to 5/15PS. Three- and four-seater Wanderer cars were also available and this model Wanderer carwas listed until 1922. Some 4-cylinder models Wanderer car in the 1½- and 2-litre range followed udring the 1920s. A 6-cylinder Wanderer car (the W11) with a 2.540cc 50bhp engine was built under licence by Martini of Switzerland. The W11 was also available in a sports version of 2.995cc and 65bhp. In addition to 4-cylinder Wanderer cars, a range of 6-cylinder cars was built during the 1930s which were based on a Porsche design. These Wanderer cars had push-rod ohv engines, and later cars had swing-axle rear suspension.
A very sporty looking Wanderer car appeared in 1936, the W25K (K for Kompressor). The 1.936cc engine with blower developed 85bhp and the Wanderer car easily reached 93mph. However, this Wanderer car did not figure much in competitions and was produced in limited numbers only. After 1932 Wanderer was a member of the Auto Union. Their cars had a reputation for quality, finish and good performance although they were intended for workaday use. In the Auto Union catalogues they represented the ‘upper middle-class’. Wanderer car production ceased at the outbreak of World War 2 in 1939, by which time two sv models, with all-round independent suspension, a 1.8-litre four and a 2.6-litre six, were being offered.
Source: Georgano, encyclopedia of motorcar; HON
The information is written with the greatest of care. However, if you have any suggested amendments please contact us at office@prewarcar.com


