The Market; all pre-war cars for sale

This is a Kinsman tire pump made in Shirley Birmingham these were used on some Rolls Royce cars and the 1936 - 40 MGTB and MGTA. this one is in its original box an although not brand new it is in very good condition. it also includes the original tire gauge which is rarely seen.

MG P/N crankshaft rear hub

MG K/L camshaft , cam has been stellited and reground to 25.65.65.25 . base circles only 15th down , has been in a competition engine with a small flaking of stellite on the flanks of 2 lobes should not be a problem for road use .

An original set of feeler gauges for a Rolls-Royce 25/30 toolkit. Marked ROLLS-ROYCE LTD on one side and 25/30 HP CHASSIS on the other. It has 4 feelers and one has tip missing, all feelers are marked. Buyer pays shipping costs.

Pre 1914 Renault hubcap wrench.....Renault open end wrench 17 and 21 for fine adjustments on magnetos and fine watches...........

Armstrong Siddeley preselect gearbox. Only used for 8 laps at Goodwood Revival in 2017 following a complete rebuild by Tom Dark engineering. Standard ratios, not close ratio. Converted to run an open prop shaft (eg MG) rather than torque tube. I have a lid mounted selector also with the gearbox.

Volumex Supercharger at fitted to the MG Bellevue until summer 2017, it has been speeded up to run at 0.7 faster than engine speed giving a boost pressure of 1.1 bar. Has rear chassis mounting bracket and input shaft. Car is now fitted with an original type Marshal blower so this is no long needed.

set CYLINDER RIDGE REAMERS. One: ±37-85mm The other: ±62-100mm US made. Complete, ready to use. The smaller shows the rear side, the knife is at the opposite side. If you are a friend of Castor oil, this tool is also handy to remove that hard coal rim, at the same time smoothen the wall. Please see my other ads too.

Original engine breather for MG NB or PB , good condition

13,5' steering wheel e.g. for MG cars. In excellent order, hardly used. Boss available separately.