The Market; all pre-war cars for sale

One 592 x 90 Rudge beaded edge wire spoke wheel, type 52 short center.

1927 engine block and head of what we believe is a 70 series, Date on head 11/1927. Number on engine is G107350. Current bore of cylinders is 3 1/8 inch.

Rudge 19 inch wire spoked wheels. Outer width of rims 119mm. One good condition (small photo) and one with light repairs needed on rim. Price is for two wheels.

Oil pressure gauge made by Smiths /London, reads up to 40lbs. In good condition but needs cleaning. Mounted with 4 screws. Outer diameter rim 7½cms, diameter housing 6cms.

skoda engine fitted with bosch distributor, solex carb and solex pressure regulator for propane gas use. Very cheap for sale

Solex large 40mm throat side-draught carburetor, Type 40 MOHDL (No. 1100019) in good condition.

AC speedometer, reads up to 100k/hour with incorporaed odometer. 12cms outer diameter, housing diameter 9cms. Looks in good condition.

1935 Austin Seven engine (No. M183362) consisting of crankcase, 2 main bearing -crankshaft with 4 conn.rods, clutch, flywheel, 020 thou block and 4 good but used pistons with rings 040 thou. Cylinders will need boring out to suit, 2 broken studs which need drilling out. This was a running engine before dismantling, so good basis to work on.

Rare and beautiful radiator mascot of a Roman centurion. Do not know yet which car it came off and if an original or an accessory. Would look very impressive on any vintage car. Radiator cap does not belong to mascot but can be supplied free of charge if required.

Cute and rare hydroplane mascot for on the radiator of a small size prewar car, such as Austin Seven, BMW "Dixie", Amilcar, Benjamin, Charron and the like. In very good condition, also the propellor turns round. Should be in the collection of a serious mascot enthusiast.