Virtually complete type CB engine of a Morris (Bullnose) Cowley (1548cc) with head, camshaft & crankshaft, 4x conn.rods, main bearing caps, exhaust manifold & good sump. Wrong sump is used for this photo, correct one is there with crankhandle + housing in one casting w.sump. Engine No. CB 99304. Date on head 11-5-25. Location: OWS 4C..
Rare opportunity to acquire a pair of New Old Stock (NOS) Front Wings for Morris 8 Series 1 & 2 carBoth wings are in Perfect Condition and were never mounted on a carMetal is 14 Gauge 1,9mm thickHave been mildly sandblasted to remove some surface rust and then primed.Will sell individually for €600 each or €1,000 for th..
Enots Brass fuel tap .. ex - 1920s Morris but probably fitted to various UK vehicles .. has been stored many years but moves freely and is fully intact ..it may require a new gasket due to the long term storage ... will post anywhere at cost
Morris Commercial 0-10 psi oil gauge c.1920s ... stored many years and is in untampered untested condition .. Although grubby there is no visible damage so should clean up well ... the body diameter is circa 61mm will post anywhere at cost ...
WANTED Fabrique Nationale (FN) car & motorcycle parts 1907 - 14
Interested in parts or info for 1907 - 1914 FN cars. Shown in the second photo are the brass steering column flange, aluminium 5 spoke steering wheel ..