The Market; all pre-war cars for sale

Overview of related ads to ad Sankey type wheels for pre 1926 Fiats 501

  • Fiat 501 503 water pump

    Fiat 501 503 water pump

    original Fiat 501. 503 brass , complete and looks good
  • Beaded edge rim 26 x 2 1/2, or 650 x 65 Westwood 40 spoke

    Beaded edge rim 26 x 2 1/2, or 650 x 65 Westwood 40 spoke

    A 26 x 2 1/2 or 650 x 65 beaded edge motorcycle wheel rim. Overall diameter 574 mm Overall width 52 mmIt is the Westwood pattern with pokes inline on raised centre section of rim. Drilled for 40 spokes. In good condition, with some rust pitting, but both rim edges are not sharp.Will accept Paypal for payment and all shipping..
  • Michelin disc wheel 715 x 115 B.E

    Michelin disc wheel 715 x 115 B.E

    Michelin disc wheel, beaded edge. Large centre 130mm P.C.D Overall diameter 490mm overall width 90mm  Suitable for 715 x 115, or 720 x 120, or 730 x 130  tyres.Condition good, rim edges are not sharp, however there is some deep rust pits to the outer edge of rim on one side, in one area. Additional photographs can be sent.
  • BSA beaded edge disc wheel 28 x 3 1/2.

    BSA beaded edge disc wheel 28 x 3 1/2.

    Dunlop beaded edge disc wheel suitable for a 1923 - 1925 BSA car. The size is 28 x 3 1/2 , large centre 130mm PCD.566 mm overall diameter 74 mm overall width.In good condition rim edges not sharp .Will accept Paypal for payment and all shipping will be charged at cost.
  • Austro Daimler Bergmeister 1932 Spare Wheel

    Austro Daimler Bergmeister 1932 Spare Wheel

    - Spare Wheel from Austro Daimler  1932 Bergmeister  chassis 27019/62 
  • Fiat 501 503 starter pinion

    Fiat 501 503 starter pinion

    Newly manufactured Fiat 501 503 starter pinionCan also be exchanged for upper steering lever Fiat 503 front top right
  • Speichenfelgen mit Zentralverschluß 4 Stück

    Speichenfelgen mit Zentralverschluß 4 Stück

    Zentralverschluß Speichenfelgen   Maße siehe BilderPro Stück 500,- Euro !  VB
  • Vintage Rear Axle and Wheels suitable for a Cyclecar Project

    Vintage Rear Axle and Wheels suitable for a Cyclecar Project

    An old solid rear axle and wheels with original Dunlop tyres. Suitable for a Cyclecar project. 80cm track from centre to centre of the tyres. Dunlop 2.75 x 21 tyres. £160.
  • Engine parts for circa 1925 Fiat 501

    Engine parts for circa 1925 Fiat 501

    Engine parts for circa 1925 Fiat 501. Look to be in serviceable condition Price for the set of two € 500 Price for one € 300 
  • Flywheel and flywheel with ringgear for circa 1925 Fiat 501

    Flywheel and flywheel with ringgear for circa 1925 Fiat 501

    Flywheel and flywheel with ringgear for circa 1925 Fiat 501 Prices € 250 and € 350 respectively

Featured

K3 Replica on KN Chassis
K3 Replica on KN Chassis
"The K3 Magnette must rank in the history books as the most famous and successful of all the record breaking MGs. With only 33 examples produced durin..
See advert
Wanted: 1923 Peugeot 163 BR Worm Drive Differential & Torque Tube
Wanted: 1923 Peugeot 163 BR Worm Drive Differential & Torque Tube
Hi, I'm looking to buy a worm drive differential and torque tube for a 1923 Peugeot 163 br  also a windscreen frame, my car is a roadster cabriolet..
See advert
Bentley 3/6 litre sports racing car kit with V5C
Bentley 3/6 litre sports racing car kit with V5C
I am a specialist vintage and classic car restorer with decades of hands-on experience. For some time I have been collecting parts for a special pr..
See advert