Nice original headlight with nice clean original glass. Nice badge. All fittings are OK, hinge and latch OK. Stainless rim OK. Inside OK. Four tiny meaningless dents in the body. 25cm diameter, 19cm deep. Heavy at 4.5KG. Postage in Europe is 25 euro. WorldWide postage is 55 euro. Great as a third headlight in the centre of your grille or to mak..
Amilcar parts for CGS/CGSS
Bracket for brake- and clutchpedals. Mentioned partnumbers: 30297, 30287 and CG325
with 1 shaft on which 2 attachments: 1 for the brakepedal and 1 for the clutchpedal
Separate pedal. Partnumber: xx327
Requires work but quite rapairable.
€ 65 exclusive transport
Pair of large headlamps off what we think was an American or British made truck, mounted on each side of the hood (bonnet) or radiator-shell. Name of manufacture unknown. Outer diameter 25cms measured across the lamps. In excellent condition, good glass, good reflector and good buckets. No dents. Just need a coat of fresh paint. Fit on e.g. Aust..
A carrier and housing for the rear main crankshaft bearing for an Amilcar G-Type engine. This came from a CGS engine and is also suitable for a CGSs.The parts are in generally good condition, though the bearing housing does have one broken lug, which is a reasonably easy thing to repair. The bearing carrier will naturally require re-metalling and s..
AMILCAR AXLE BEAM 52CMS BETWEEN SPRING PAD CENTERS, THESE HAVE OFTEN BEEN USED ON BRESCIAS, COMES WITH WELDED DONOR AXLE FOR BRAKES AND PARTS. CAN BE DELIVERED TO VRM MONTLHERY.
Very nice pair of headligths MARCHAL, total diameter of 235 millimeters. This is the model with 3 bulbs (including a shell through a magnifying glass). Fully polished headlamps with casing repainted in black. Good general condition despite a small crack on casing but nothing serious for lighthouses of that time.More photos on request...