The Market; all pre-war cars for sale

Brand new Brescia flywheel. Machine ready to take a Brineton Engineering ring gear. This is a reproduction and is to original pattern.

for sale a dashboard pull tab  for carburettor adjustment for a variety of French cars in original and used condition, the markings have been erased. The diameter of the dashboard bracket is 70 mm and 36 mm inside. The length is 115 mm and 155 mm to deploy . Shipping worldwide at cost and PayPal accepted.

A pair of rare aluminium door panel skins which are apparently from a Bugatti type 55; which had some bodywork repairs about 40 years ago. Light oxidation on the inside bottoms. Beautiful shaped. They look ok to me and could be adapted for other cars. £300 pair.

Carburettor of standard.brassy side draft.1925 till 1930

GP Gearbox LidOriginal Water ElbowSpring HangersNew GP main rear springs plus assorted leaves-Believed made by Gino HoskinsUsed GP  main rear spring leavesInternational delivery at costSensibly priced for early sale.International delivery at cost

Brescia size (384mm) steering wheel in walnut on a 2mm  stainless armature. Newly made and very strong with four layers of walnut and secret dowelling of the inner layers all glued with epoxy resin .Would also suit Amilcar,  Salmson or similar.

camshaft gear, bevel gear for vertical drive also coupling vertical drive for T35,  T35B,  T38,  T38A

Nose gear & oil pump driven to T35B, T38A T51, T55.

Removed from 1921 Chassis No 1254  Type 23 in 1990 ( Replaced by new  Hardy Spicer prop shaft) Appears complete except for one threaded grease cap. 

Appears complete with float , jets etc but a bit seized up. Needs restoration. Fitted to a manifold with some kind of brass air control screw. Spring to hold bowl top broken