The Market; all pre-war cars for sale

Pair of large C.A.V.-headlights. Type CFHF 150. Outer diameter 23cms. Good chromed rims, very good housings, no dents, only need a fresh coat of paint. Stepped glass but one glass cracked.

A vintage sidecar hub for a motorcycle or suitable for a Cyclecar. Appears to be new old stock. No visible makers name. 195mm long from cap to end of axle. 22mm diameter axle which is fully threaded. 99mm across the width of the flanges. 73mm across the width of each flange. 40 hole. Axle turns freely. 

Appears to be new old stock, British made vintage sidecar hub. Not been fitted or used, but shows signs of age. Probably dates from the 1930’s. No visible makers name. Suitable for a vintage sidecar or Cyclecar. 170mm in length from hub cap to end of stub axle. 66mm hub flanges. 90mm across the flanges. 40 hole. 19mm diameter on the stub axle. 

An original penny farthing rear hub dating from the 1880’s. No makers marks. Bronze hub flanges drilled for 1/8th radial spokes. Brass oiler (missing top acorn cap). New nuts. Tapered bearings. Hub flanges are 61mm in diameter. 75mm across the bearings on the axle. A useable original hub.

Scharlach , phare pour moto 12.5 cm de diamètreEn laiton , A  RENICKLER une soudure a refaire sur la casquette , verre a changer sinon pas de bosses , bec acétylène présent.paypal accepté

pair of 24cm Marchal headlights.AB TP64

pair of brass headlights. the back is damaged. see photos. 18.3cm diameter

lot of Marchal monocle lights, for parts or restoration

for sale a V-belt pre-war motorcycle or car, in original. Shipping worldwide at cost and PayPal accepted.4/8 inches or 2/4 inches; 12mm-13mm; 2.5 meters length = 139 euros; mostly for 74ccm to 118ccm or mostly for auxiliary bicycles; Alternators; Water pumps5/8 inches; 15mm-16mm; 2.5 meters length = 149 euros; mostly for around 200..

for sale a carbite lamp, in original used. Shipping worldwide at cost and PayPal accepted.