Filter

Coal scuttle bonnets after 1906


Makes with coal scuttle bonnets were very common during the early years of the 20th century (and often difficult to identify!). After 1906 this number dropped drastically, and of the remaining makes Renault was of course the dominant one. It was certainly not the only one, so here I show some of the others in Europe:

In France Charron with its horizontal top, Clément-Bayard with its continuous rim around the top, Th. Schneider (or just Schneider) with its high bonnet and its wire net fencing bonnet side and Corre with its tilted louvres are among the more familiar  makes. Less familiar were Hurtu and SCAR and rarely seen makes like La Ponette, Ampère or Mildé-Gaillardet. Unusual were Alda with its sharp pointed bonnet and Werner.

On the other side of the Channel Arrol-Johston turned to this bonnet-type in 1910 (with the characteristic hand grip at the front). Lesser known are the (very Renault-like, but only locally distributed) Dodson, the Cheswold, the Crowdy, the Phoenix and the Pilgrim. Unusual was the Ariel-Simplex with its sharp edges and the bulb on the right side of the bonnet for the steering column.

Makes having these bonnets in other countries were scarce: Komnick was the most prominent, but was rarely seen west of Germany, for the rest they seem to be mainly restricted to electric cars like NAG (Germany), STAE (Italy) or Tribelhorn (Switzerland).

All of the (non-electric) makes had dash-mounted radiators, having often distinguishable shapes, which sometimes changed in time. Normally identification is not too difficult, if you check all the details. Leaves the lead picture up to your expertise! Only clue is that it is a well-known make in an unusual appearance.

All images from contemporary magazines and personal archive

Published:
Saturday March 19th, 2016
Unknown
21 April 2016, 10:38
So why was 1906 the year when coal scuttle bonnets went out of fashion?
Read more
Unknown
26 March 2016, 17:42
Here is S.C.A.R.:
http://amicarte51.blogspot.fi/2013/03/scar-societe-de-construction-automobile.html
Also found this two-cylinder 8/10 Voiturette apparently in Sweden:
https://www.flickr.com/photos/tekniskamuseet/21265661533/in/album-72157658937311932/
Read more
Unknown
24 March 2016, 03:02
Also add a footnote to the list for the American made Mack AC "bulldog" truck
Read more
Unknown
24 March 2016, 00:51
Only joking, it is a pleasure to be congratulated for a tidbit of old car knowledge rather than hearing the daily "whatever are you going to do with that hunk of junk?!?"
Read more
Unknown
22 March 2016, 18:57
Hi Don, the prize is the honour of being the first to have identified the 'mystery' car. Sometimes that is all, sorry :-) For prizes in kind we only have the Whatisit quiz.
Read more
Unknown
22 March 2016, 16:40
NOT wishing to offend HISTORY, I am forced to concede that the so called "coal scuttle" bonnet really is nothing similar to a real coal scuttle, which is a vertical truncated CYLINDRICAL CONE with two handles on the side, convenient to intermediately transport small amounts of coal to a small source of heat(much too small to supply a furnace).

Dear Domenic, you may keep a cylyndrical vertical coal scuttle at home ( the carrying type). Yet it should be noted that with the cars people refer to the low sitting and rectangular coal scuttle as often is seen on the side of stoves. https://img0.etsystatic.com/067/0/7494461/il_570xN.750211388_ng2d.jpg
Read more
Unknown
22 March 2016, 03:10
So what is the "Gran Prix"?

Is it cheating if I have one at home?
Read more
Ariejan
21 March 2016, 14:15
Congratulations, Don Bosco, indeed a Darracq 'sans soupapes'. Since the first use of the valveless Knight engine in 1906 the number of makes using a valveless engine in at least one of their models had increased enormously by 1912. Darracq counted at least 28 models at the 1911 Olympia Show! All kinds of valveless systems had been developed by that time and Darracq used for this 1912 model a system of the rotary valve type developed by Henriod: a long hollow rotary distributer rotated on one side of the engine with holes serving the inlet and outlet valves.
Nobody seemed to be amazed at the time by the fact that Darracq used this coal-scuttle type bonnet and I couldn't find any comment on this for Darracq unique model. The reason may be that the coal scuttle was still a common sight in daily traffic. Another reason may have been, that the engine was easy to cool: thermosyphon cooling with a small cooler seemed to be sufficent, making an expensive radiator and even a water pump and a ventilator unnecessary.
Read more
Unknown
20 March 2016, 22:13
Andre, you question is most pertinent, and can be answered as usual by many rationalizations that always make a bit of sense.
Maybe the BIGGEST question is WHY an ancient civilization devoted so much of its labor and population to create singular tombs that would last for millennia. Not yet answered, but the question will forever remain.
Read more
Unknown
20 March 2016, 11:39
Darracq "sans soupappes" with the Henriot engine
Read more
Unknown
20 March 2016, 10:53
Just out of curiosity...why was this bonnet/radiator shape so popular during that period and why its sudden demise?
Read more
Unknown
20 March 2016, 09:31
I think that you have duplicated Alda as a SCAR
Read more
Craig Little.
17 March 2016, 01:24
Judging by what appears to be a figure on the front of the scuttle, I'd suggest it is a Bayard.
Read more
Unknown
16 March 2016, 23:47
You forgot to mention Franklin which was very popular in North America, perhaps second to Renault in numbers.
Read more

Make a comment, ask a question, give your opinion, share additional information or start a discussion by filling in the fields below.


Log in to post your comment directly

Upload images to your reaction