1930's Armstrong Pre-Select Gearbox. Riley 12/4 - MG K Type.

A pre-select gearbox  suitable for Riley 12/4 , MG K type etc. Selects gears, but will need to be check and serviced. Purchased a few years ago as a spare. No longer required. Located and collection from CM6 1PQ - Essex - UK.  Happy to work with your own shipper for International customers. 

Gearbox (& clutch)

£ 650

Vintage or Edwardian Car Front Axle. Unknown Maker.

An unknown make vintage car front axle.  Looks Edwardian and also vintage. So date is unknown. It has been in the shed for years and never been able to identify the maker. ( Do you know?) Suitable for someone building a special?  Located in Essex - UK. Collection preffered. 

Axles front

£ 150

1920's De Dion Bouton Engine.

A De Dion Bouton 4 cylinder engine. Possibly from a fire pump. Engine turns over and has its original magneto. All appear to have had not much use and probably would run with a little time spent on it and the correct carburettor fitted. Very good compression. Collection from Essex - UK.  Happy to work with your own shipper and transportation. 

Engines Complete

£ 1.250

c.1911 De Dion Bouton Front and Rear Axles and Parts.

A front and rear axle for De Dion Bouton. c.1911. All from the same car and rescued a number of years ago. The rear axle diff casing has been stripped for inspection and the crown wheel and pinion is in good condition, but one half shaft is broken and maybe why the car was taken off the road. The hubs are not good, but the brake drums and castin..

Axles rear

£ 350

c.1913 De Dion Bouton Edwardian Car Gearbox

A  rare and useful gearbox made .c1913 by De Dion Bouton. Suitable for someone building  an Edwardian car. Internals are good and selects gears. Some damage to the lower casing as shown in the photos. For overhaul. Buyer to collect from Essex, UK. Happy to work with you own shipper for international buyers. 

Gearbox (& clutch)

On request

c.1902/3 Veteran Motorcycle Project suitable for a Clement/ Werner Type Engine.

Offered as a rare opportunity for the pioneer enthusiast or builder: a kit of original period parts gathered over many years to assemble an early veteran clip-on motorcycle (ideal for engines such as Clément, Werner, or similar early units dating from 1902/3.Frame: Original period heavy-tubed cycle/motorcycle and forks built with the corr..

1903

Clement

Motorcyclette

£ 2.250

c.1869 English Bone-Shaker Velocipede Bicycle

A nice example of an early English Velocipede bicycle also known as a 'Bone Shaker' for obvious reasons. This a good riding machine  having been well cared for by the previous custodian and used for various period events in their ownership.  Good tight spokes and fellows for the wheels and a leather strap operates the rear brake by twisting the ..

Velocipede

Velocipede

1861 - 1870

£ 3.800